source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Inc/ATA_ID.inc@ 305

Last change on this file since 305 was 277, checked in by gregli@…, 13 years ago

Moved the bulk of the serial code to the assembly library, for inclusion in other utilities. Fixed a bug in int13h.asm when floppy support was not enabled that was preventing foreign drives from working properly.
File size: 21.2 KB
RevLine 
[3]1; File name : ATA_ID.inc
2; Project name : IDE BIOS
3; Created date : 30.10.2009
4; Last update : 12.3.2010
5; Author : Tomi Tilli
6; Description : ATA Identify Drive information.
7%ifndef ATA_ID_INC
8%define ATA_ID_INC
9
10; ATA-1 Drive Information struct
11; F = Fixed value
12; V = Variable value
13; R = Reserved word
14; X = Vendor specific word
15struc ATA1
16 .wGenCfg resw 1 ; 0F, General configuration bit-significant information
17 .wCylCnt resw 1 ; 1F, Number of cylinders
18 resw 1 ; 2R
19 .wHeadCnt resw 1 ; 3F, Number of heads
20 .wBpTrck resw 1 ; 4F, Number of unformatted bytes per track
21 .wBpSect resw 1 ; 5F, Number of unformatted bytes per sector
22 .wSPT resw 1 ; 6F, Number of sectors per track
23 resw 3 ; 7...9X
24 .strSerial resb 20 ; 10...19F, Serial number (20 ASCII characters, 0000h=not specified)
25 .wBuffType resw 1 ; 20F, Buffer type
26 .wBuffSize resw 1 ; 21F, Buffer size in 512 byte increments (0000h=not specified)
27 .wEccCnt resw 1 ; 22F, # of ECC bytes avail on read/write long cmds (0000h=not spec'd)
28 .strFirmW resb 8 ; 23...26F, Firmware revision (8 ASCII characters, 0000h=not specified)
29 .strModel resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified)
30 .bBlckSize resb 1 ; 47[0-7]F, Maximum number of sectors that can be transferred
31 ; per interrupt on read and write multiple commands
32 ; (00h=Read/write multiple commands not implemented)
33 resb 1 ; 47[8-15]X
34 .wDWIO resw 1 ; 48F, Can perform doubleword I/O (boolean)
35 .wCaps resw 1 ; 49FRX, Capabilities
36 resw 1 ; 50R
37 resb 1 ; 51[0-7]X
38 .bPIOTiming resb 1 ; 51[8-15]F, PIO data transfer cycle timing mode
39 resb 1 ; 52[0-7]X
40 .bDMATiming resb 1 ; 52[8-15]F, DMA data transfer cycle timing mode
41 .wFields resw 1 ; 53FVR, Field (next words) validity bits
42
43 ; Words 54-58 are valid only if bit0 is set in .wFields
44 .wCurCyls resw 1 ; 54V, Number of current cylinders
45 .wCurHeads resw 1 ; 55V, Number of current heads
46 .wCurSPT resw 1 ; 56V, Number of current sectors per track
47 .dwCurSCnt resd 1 ; 57...58V, Current capacity in sectors
48
49 ; Words 59-63 are always valid
50 .bBlockSel resb 1 ; 59[0-7]V, Current setting for number of sectors that
51 ; can be transferred per interrupt on R/W multiple command
52 .bBlockFlgs resb 1 ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid
53 .dwLBACnt resd 1 ; 60...61F, Total number of user addressable sectors (LBA mode only)
54 .bSDMASupp resb 1 ; 62[0-7]F, Single word DMA transfer modes supported
55 .bSDMAAct resb 1 ; 62[8-15]V, Single word DMA transfer mode active
56 .bMDMASupp resb 1 ; 63[0-7]F, Multiword DMA transfer modes supported
57 .bMDMAAct resb 1 ; 63[8-15]V, Multiword DMA transfer mode active
58endstruc
59
60; ATA-1 Word 0, General configuration
61A1_wGenCfg_NONMAG EQU (1<<15) ; Reserved for non-magnetic drives
62A1_wGenCfg_FGAPREQ EQU (1<<14) ; Format speed tolerance gap required
63A1_wGenCfg_TRCKOFF EQU (1<<13) ; Track offset option available
64A1_wGenCfg_DATAOFF EQU (1<<12) ; Data strobe offset option available
65A1_wGenCfg_ROTTOL EQU (1<<11) ; Rotational speed tolerance is > 0,5%
66A1_wGenCfg_XFERFAST EQU (1<<10) ; Disk transfer rate > 10 Mbs
67A1_wGenCfg_XFERMED EQU (1<<9) ; Disk transfer rate > 5Mbs but <= 10Mbs
68A1_wGenCfg_XFERSLOW EQU (1<<8) ; Disk transfer rate <= 5Mbs
69A1_wGenCfg_REMOVABLE EQU (1<<7) ; Removable cartridge drive
70A1_wGenCfg_FIXED EQU (1<<6) ; Fixed drive
71A1_wGenCfg_MOTCTRL EQU (1<<5) ; Spindle motor control option implemented
72A1_wGenCfg_HEADSLOW EQU (1<<4) ; Head switch time > 15 usec
73A1_wGenCfg_NOTMFM EQU (1<<3) ; Not MFM encoded
74A1_wGenCfg_SOFTSECT EQU (1<<2) ; Soft sectored
75A1_wGenCfg_HARDSECT EQU (1<<1) ; Hard sectored
76
77; ATA-1 Word 49, Capabilities
78A1_wCaps_LBA EQU (1<<9) ; LBA supported
79A1_wCaps_DMA EQU (1<<8) ; DMA supported
80
81; ATA-1 Word 53, Fields
82A1_wFields_54to58 EQU (1<<0) ; The fields reported in words 54-58 are valid
83
84; ATA-1 Word 59 high byte, Block mode flags
85A1_bBlockFlgs_VALID EQU (1<<0) ; Multiple sector setting (bBlockSel) is valid
86
87
88;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
89
90; ATA-2 Drive Information struct
91; F = Fixed value
92; V = Variable value
93; R = Reserved word
94; X = Vendor specific word
95struc ATA2
96 .wGenCfg resw 1 ; 0F, General configuration bit-significant information
97 .wCylCnt resw 1 ; 1F, Number of logical cylinders
98 resw 1 ; 2R
99 .wHeadCnt resw 1 ; 3F, Number of logical heads
100 resw 1 ; 4X
101 resw 1 ; 5X
102 .wSPT resw 1 ; 6F, Number of logical sectors per track
103 resw 3 ; 7...9X
104 .strSerial resb 20 ; 10...19F, Serial number (20 ASCII characters, 0000h=not specified)
105 resw 1 ; 20X
106 resw 1 ; 21X
107 .wEccCnt resw 1 ; 22F, # of ECC bytes avail on read/write long cmds (0000h=not spec'd)
108 .strFirmW resb 8 ; 23...26F, Firmware revision (8 ASCII characters, 0000h=not specified)
109 .strModel resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified)
110 .bBlckSize resb 1 ; 47[0-7]F, Maximum number of sectors that can be transferred
111 ; per interrupt on read and write multiple commands
112 ; (00h=Read/write multiple commands not implemented)
113 resb 1 ; 47[8-15]X
114 resw 1 ; 48R
115 .wCaps resw 1 ; 49FRX, Capabilities
116 resw 1 ; 50R
117 resb 1 ; 51[0-7]X
118 .bPIOTiming resb 1 ; 51[8-15]F, PIO data transfer cycle timing mode
119 resb 1 ; 52[0-7]X
120 .bDMATiming resb 1 ; 52[8-15]F, DMA data transfer cycle timing mode
121 .wFields resw 1 ; 53FVR, Field (next words) validity bits
122
123 ; Words 54-58 are valid only if bit0 is set in .wFields
124 .wCurCyls resw 1 ; 54V, Number of current logical cylinders
125 .wCurHeads resw 1 ; 55V, Number of current logical heads
126 .wCurSPT resw 1 ; 56V, Number of current logical sectors per track
127 .dwCurSCnt resd 1 ; 57...58V, Current capacity in sectors
128
129 ; Words 59-63 are always valid
130 .bBlockSel resb 1 ; 59[0-7]V, Current setting for number of sectors that
131 ; can be transferred per interrupt on R/W multiple command
132 .bBlockFlgs resb 1 ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid
133 .dwLBACnt resd 1 ; 60...61F, Total number of user addressable sectors (LBA mode only)
134 .bSDMASupp resb 1 ; 62[0-7]F, Single word DMA transfer modes supported
135 .bSDMAAct resb 1 ; 62[8-15]V, Single word DMA transfer mode active
136 .bMDMASupp resb 1 ; 63[0-7]F, Multiword DMA transfer modes supported
137 .bMDMAAct resb 1 ; 63[8-15]V, Multiword DMA transfer mode active
138
139 ; Words 64-70 are valid only if bit1 is set in .wFields (ATA2+)
140 .bPIOSupp resb 1 ; 64[0-7]F, Advanced PIO Transfer Modes Supported
141 resb 1 ; 64[8-15]R
142 .wMDMAMinCy resw 1 ; 65F, Minimum Multiword DMA Transfer Cycle Time Per Word
143 .wMDMARecCy resw 1 ; 66F, Manufacturer’s Recommended Multiword DMA Transfer Cycle Time
144 .wPIOMinCy resw 1 ; 67F, Minimum PIO Transfer Cycle Time Without Flow Control
145 .wPIOMinCyF resw 1 ; 68F, Minimum PIO Transfer Cycle Time With IORDY Flow Control
146endstruc
147
148; ATA-2 Word 0, General configuration
149A2_wGenCfg_NONMAG EQU (1<<15) ; Reserved for non-magnetic drives
150A2_wGenCfg_REMOVABLE EQU (1<<7) ; Removable media device
151A2_wGenCfg_FIXED EQU (1<<6) ; Not removable controller and/or device
152
153; ATA-1 Word 49, Capabilities
154A2_wCaps_TIMER EQU (1<<13) ; Standby timer values as specified in this standard are supported
155A2_wCaps_IORDY EQU (1<<11) ; IORDY supported
156A2_wCaps_CANDISIORDY EQU (1<<10) ; IORDY can be disabled
157A2_wCaps_LBA EQU (1<<9) ; LBA supported
158A2_wCaps_DMA EQU (1<<8) ; DMA supported
159
160; ATA-2 Word 53, Fields
161A2_wFields_54to58 EQU (1<<0) ; The fields reported in words 54-58 are valid
162A2_wFields_64to70 EQU (1<<1) ; The fields reported in words 64-70 are valid
163
164; ATA-2 Word 59 high byte, Block mode flags
165A2_bBlockFlgs_VALID EQU (1<<0) ; Multiple sector setting (bBlockSel) is valid
166
167
168;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
169
170; ATA-6 Drive Information struct
171; F = Fixed value
172; V = Variable value
173; R = Reserved word
174; X = Vendor specific word
175struc ATA6
176 .wGenCfg resw 1 ; 0F, General configuration bit-significant information
177 resw 1 ; 1X, Obsolete (Number of logical cylinders)
178 resw 1 ; 2V, Specific configuration
179 resw 1 ; 3X, Obsolete (Number of logical heads)
180 resw 1 ; 4X
181 resw 1 ; 5X
182 resw 1 ; 6X, Obsolete (Number of logical sectors per track)
183 resw 2 ; 7...8V, Reserved for assignment by the CompactFlash Association
184 resw 1 ; 9X
185 .strSerial resb 20 ; 10...19F, Serial number (20 ASCII characters, 0000h=not specified)
186 resw 1 ; 20X
187 resw 1 ; 21X
188 resw 1 ; 22X, Obsolete (# of ECC bytes avail on read/write long cmds (0000h=not spec'd))
189 .strFirmW resb 8 ; 23...26F, Firmware revision (8 ASCII characters, 0000h=not specified)
190 .strModel resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified)
191 .bBlckSize resb 1 ; 47[0-7]F, Maximum number of sectors that can be transferred
192 ; per interrupt on read and write multiple commands
193 ; (00h=Read/write multiple commands not implemented)
194 resb 1 ; 47[8-15]F, 80h
195 resw 1 ; 48R
196 .wCaps resw 1 ; 49FX, Capabilities
197 .wCapsHigh resw 1 ; 50FX, Capabilities 2
198 resw 1 ; 51X, Obsolete (PIO data transfer cycle timing mode)
199 resw 1 ; 52X, Obsolete (DMA data transfer cycle timing mode)
200 .wFields resw 1 ; 53FX, Field (next words) validity bits
201
202 ; Words 54-58 are valid only if bit0 is set in .wFields
203 resw 1 ; 54X, Obsolete (Number of current logical cylinders)
204 resw 1 ; 55X, Obsolete (Number of current logical heads)
205 resw 1 ; 56X, Obsolete (Number of current logical sectors per track)
206 resd 1 ; 57...58X, Obsolete (Current capacity in sectors)
207
208 ; Words 59-63 are always valid
209 .bBlockSel resb 1 ; 59[0-7]V, Current setting for number of sectors that
210 ; can be transferred per interrupt on R/W multiple command
211 .bBlockFlgs resb 1 ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid
212 .dwLBACnt resd 1 ; 60...61F, Total number of user addressable sectors (LBA-28)
213 resb 1 ; 62[0-7]X, Obsolete (Single word DMA transfer modes supported)
214 resb 1 ; 62[8-15]X, Obsolete (Single word DMA transfer mode active)
215 .wMDMA resw 1 ; 63FV, Multiword DMA transfer modes supported and active
216
217 ; Words 64-70 are valid only if bit1 is set in .wFields (ATA2+)
218 .bPIOSupp resb 1 ; 64[0-7]F, Advanced PIO Transfer Modes Supported
219 resb 1 ; 64[8-15]R
220 .wMDMAMinCy resw 1 ; 65F, Minimum Multiword DMA Transfer Cycle Time Per Word
221 .wMDMARecCy resw 1 ; 66F, Manufacturer’s Recommended Multiword DMA Transfer Cycle Time
222 .wPIOMinCy resw 1 ; 67F, Minimum PIO Transfer Cycle Time Without Flow Control
223 .wPIOMinCyF resw 1 ; 68F, Minimum PIO Transfer Cycle Time With IORDY Flow Control
224 resw 71-69 ; 69...70R
225
226 ; Words 71...74 are reserved for IDENTIFY PACKET DEVICE command
227 resw 75-71 ; 71...74R
228
229 .wQueue resw 1 ; 75[0-4]F, Maximum queue depth - 1
230 resw 80-76 ; 76...79R
231
232 .wMajorVer resw 1 ; 80F, Major Version Number
233 .wMinorVer resw 1 ; 81F, Minor Version Number
234 .wSetSup82 resw 1 ; 82F, Command set supported
235 .wSetSup83 resw 1 ; 83F, Command sets supported
236 .wSetSup84 resw 1 ; 84F, Command set / Feature supported extension
237 .wEnFor82 resw 1 ; 85FV, Command set / feature enabled (for word 82)
238 .wEnFor83 resw 1 ; 86FV, Command set / feature enabled (for word 83)
239 .wEnFor84 resw 1 ; 87FV, Command set / feature enabled (for word 84)
240
241 ; Word 88 is valid only if bit2 is set in .wFields (word 53)
242 .wUDMA resw 1 ; 88FV, Ultra DMA Mode support
243
244 .wEraseTime resw 1 ; 89F, Time required for security erase unit completion
245 .wEnhErTime resw 1 ; 90F, Time required for Enhanced security erase completion
246 .wCurPower resw 1 ; 91V, Current advanced power management value
247 .wPWRev resw 1 ; 92V, Master Password Revision Code
248 .wReset resw 1 ; 93FV, Hardware reset result
249 .bCurAcous resb 1 ; 94[0-7]V, Current automatic acoustic management value
250 .bRecAcous resb 1 ; 94[8-15]V, Vendor’s recommended acoustic management value
251 resw 100-95 ; 95...99R
252 .qwLBACnt resb 8 ; 100...103V, Total number of user addressable sectors (LBA48)
253 resw 127-104 ; 104...126R
254 .wRMSN resw 1 ; 127F, Removable Media Status Notification feature set support
255 .wSecurity resw 1 ; 128FV, Security Status
[277]256 resw 160-129 ; 129...157X, Vendor Specific
[3]257 .wCFAPower resw 1 ; 160FV, CFA Power Mode 1
258 resw 176-161 ; 161...175R, Reserved for assignment by the CompactFlash Association
259 .strMediaSr resw 206-176 ; 176...205V, Current media serial number
260 resw 255-206 ; 206...254R
261 .bSignature resb 1 ; 255[0-7]X, Signature
262 .bChecksum resb 1 ; 255[8-15]X, Checksum
263endstruc
264
265; ATA-6 Word 0, General configuration
266A6_wGenCfg_REMOVABLE EQU (1<<7) ; Removable media device
267A6_wGenCfg_INCOMPLETE EQU (1<<2) ; Response incomplete
268
269; ATA-6 Word 49, Capabilities
270A6_wCaps_TIMER EQU (1<<13) ; Standby timer values as specified in this standard are supported
271A6_wCaps_IORDY EQU (1<<11) ; IORDY supported
272A6_wCaps_CANDISIORDY EQU (1<<10) ; IORDY can be disabled
273A6_wCaps_LBA EQU (1<<9) ; LBA supported
274A6_wCaps_DMA EQU (1<<8) ; DMA supported
275
276; ATA-6 Word 53, Fields
277A6_wFields_88 EQU (1<<2) ; The fields reported in word 88 are valid
278A6_wFields_64to70 EQU (1<<1) ; The fields reported in words 64-70 are valid
279
280; ATA-6 Word 59 high byte, Block mode flags
281A6_bBlockFlgs_VALID EQU (1<<0) ; Multiple sector setting (bBlockSel) is valid
282
283; ATA-6 Word 63, Multiword DMA Mode
284A6_wMDMA_MODE2_SELECTED EQU (1<<10) ; Multiword DMA mode 2 is selected
285A6_wMDMA_MODE1_SELECTED EQU (1<<9) ; Multiword DMA mode 1 is selected
286A6_wMDMA_MODE0_SELECTED EQU (1<<8) ; Multiword DMA mode 0 is selected
287A6_wMDMA_MODE2_SUPRTD EQU (1<<2) ; Multiword DMA mode 2 and below are supported
288A6_wMDMA_MODE1_SUPRTD EQU (1<<1) ; Multiword DMA mode 1 and below are supported
289A6_wMDMA_MODE0_SUPRTD EQU (1<<0) ; Multiword DMA mode 0 is supported
290
291; ATA-6 Word 80, Major version number
292A6_wMajorVer_ATA6 EQU (1<<6)
293A6_wMajorVer_ATA5 EQU (1<<5)
294A6_wMajorVer_ATA4 EQU (1<<4)
295A6_wMajorVer_ATA3 EQU (1<<3)
296
297; ATA-6 Word 82, Command set supported
298A6_wSetSup82_NOP EQU (1<<14) ; NOP command supported
299A6_wSetSup82_RDBUFF EQU (1<<13) ; READ BUFFER command supported
300A6_wSetSup82_WRBUFF EQU (1<<12) ; WRITE BUFFER command supported
301A6_wSetSup82_PROT_AREA EQU (1<<10) ; Host Protected Area feature set supported
302A6_wSetSup82_DEV_RESET EQU (1<<9) ; DEVICE RESET command supported
303A6_wSetSup82_SERVICE EQU (1<<8) ; SERVICE interrupt supported
304A6_wSetSup82_RELEASE EQU (1<<7) ; Release interrupt supported
305A6_wSetSup82_LOOKAHEAD EQU (1<<6) ; Look-ahead supported
306A6_wSetSup82_WRCACHE EQU (1<<5) ; Write cache supported
307A6_wSetSup82_POWERMAN EQU (1<<3) ; Power Management feature set supported
308A6_wSetSup82_REM_MEDIA EQU (1<<2) ; Removable Media feature set supported
309A6_wSetSup82_SECURITY EQU (1<<1) ; Security Mode feature set supported
310A6_wSetSup82_SMART EQU (1<<0) ; SMART feature set supported
311
312; ATA-6 Word 83, Command sets supported
313A6_wSetSup83_FLUSH_EXT EQU (1<<13) ; FLUSH CACHE EXT command supported
314A6_wSetSup83_FLUSH EQU (1<<12) ; FLUSH CACHE command supported
315A6_wSetSup83_CFG EQU (1<<11) ; Device Configuration Overlay feature set supported
316A6_wSetSup83_LBA48 EQU (1<<10) ; 48-bit LBA feature set supported
317A6_wSetSup83_ACOUSTIC EQU (1<<9) ; Automatic Acoustic Management feature set supported
318A6_wSetSup83_SET_MAX EQU (1<<8) ; SET MAX security extension supported
319A6_wSetSup83_FEATURES EQU (1<<6) ; SET FEATURES subcommand required to spinup after power-up
320A6_wSetSup83_POWERUP EQU (1<<5) ; Power-Up In Standby feature set supported
321A6_wSetSup83_RMSN EQU (1<<4) ; Removable Media Status Notification feature set supported
322A6_wSetSup83_APM EQU (1<<3) ; Advanced Power Management feature set supported
323A6_wSetSup83_CFA EQU (1<<2) ; CFA feature set supported
324A6_wSetSup83_DMAQUEUED EQU (1<<1) ; READ/WRITE DMA QUEUED supported
325A6_wSetSup83_MICROCODE EQU (1<<0) ; DOWNLOAD MICROCODE command supported
326
327; ATA-6 Word 84, Command set/feature supported extension
328A6_wSetSup84_GENLOG EQU (1<<5) ; General Purpose Logging feature set supported
329A6_wSetSup84_MEDIAPASS EQU (1<<3) ; Media Card Pass Through Command feature set supported
330A6_wSetSup84_MEDIASER EQU (1<<2) ; Media serial number supported
331A6_wSetSup84_SMARTTEST EQU (1<<1) ; SMART self-test supported
332A6_wSetSup84_SMARTLOG EQU (1<<0) ; SMART error logging supported
333
334; ATA-6 Word 85, Command set/feature enabled (supported by word 82)
335A6_wEnFor82_NOP EQU (1<<14) ; NOP command enabled
336A6_wEnFor82_RDBUFF EQU (1<<13) ; READ BUFFER command enabled
337A6_wEnFor82_WRBUFF EQU (1<<12) ; WRITE BUFFER command enabled
338A6_wEnFor82_PROT_AREA EQU (1<<10) ; Host Protected Area feature set enabled
339A6_wEnFor82_DEV_RESET EQU (1<<9) ; DEVICE RESET command enabled
340A6_wEnFor82_SERVICE EQU (1<<8) ; SERVICE interrupt enabled
341A6_wEnFor82_RELEASE EQU (1<<7) ; Release interrupt enabled
342A6_wEnFor82_LOOKAHEAD EQU (1<<6) ; Look-ahead enabled
343A6_wEnFor82_WRCACHE EQU (1<<5) ; Write cache enabled
344A6_wEnFor82_POWERMAN EQU (1<<3) ; Power Management feature set enabled
345A6_wEnFor82_REM_MEDIA EQU (1<<2) ; Removable Media feature set enabled
346A6_wEnFor82_SECURITY EQU (1<<1) ; Security Mode feature set enabled
347A6_wEnFor82_SMART EQU (1<<0) ; SMART feature set enabled
348
349; ATA-6 Word 86, Command set/feature enabled (supported by word 83)
350A6_wEnFor83_FLUSH_EXT EQU (1<<13) ; FLUSH CACHE EXT command supported
351A6_wEnFor83_FLUSH EQU (1<<12) ; FLUSH CACHE command supported
352A6_wEnFor83_CFG EQU (1<<11) ; Device Configuration Overlay supported
353A6_wEnFor83_LBA48 EQU (1<<10) ; 48-bit LBA feature set supported
354A6_wEnFor83_ACOUSTIC EQU (1<<9) ; Automatic Acoustic Management feature set enabled
355A6_wEnFor83_SET_MAX EQU (1<<8) ; SET MAX security extension enabled by SET MAX SET PASSWORD
356A6_wEnFor83_FEATURES EQU (1<<6) ; SET FEATURES subcommand required to spinup after power-up
357A6_wEnFor83_POWERUP EQU (1<<5) ; Power-Up In Standby feature set enabled
358A6_wEnFor83_RMSN EQU (1<<4) ; Removable Media Status Notification feature set enabled
359A6_wEnFor83_APM EQU (1<<3) ; Advanced Power Management feature set enabled
360A6_wEnFor83_CFA EQU (1<<2) ; CFA feature set enabled
361A6_wEnFor83_DMAQUEUED EQU (1<<1) ; READ/WRITE DMA QUEUED supported
362A6_wEnFor83_MICROCODE EQU (1<<0) ; DOWNLOAD MICROCODE command supported
363
364; ATA-6 Word 87, Command set/feature default
365A6_wEnFor84_GENLOG EQU (1<<5) ; General Purpose Logging feature set supported
366A6_wEnFor84_MEDIAPASS EQU (1<<3) ; Media Card Pass Through Command feature set enabled
367A6_wEnFor84_MEDIASER EQU (1<<2) ; Media serial number is valid
368A6_wEnFor84_SMARTTEST EQU (1<<1) ; SMART self-test supported
369A6_wEnFor84_SMARTLOG EQU (1<<0) ; SMART error logging supported
370
371; ATA-6 Word 88, Ultra DMA Mode
372A6_wUDMA_MODE5_SELECTED EQU (1<<13) ; Ultra DMA mode 5 is selected
373A6_wUDMA_MODE4_SELECTED EQU (1<<12) ; Ultra DMA mode 4 is selected
374A6_wUDMA_MODE3_SELECTED EQU (1<<11) ; Ultra DMA mode 3 is selected
375A6_wUDMA_MODE2_SELECTED EQU (1<<10) ; Ultra DMA mode 2 is selected
376A6_wUDMA_MODE1_SELECTED EQU (1<<9) ; Ultra DMA mode 1 is selected
377A6_wUDMA_MODE0_SELECTED EQU (1<<8) ; Ultra DMA mode 0 is selected
378A6_wUDMA_MODE5_SUPRTD EQU (1<<5) ; Ultra DMA mode 5 and below are supported
379A6_wUDMA_MODE4_SUPRTD EQU (1<<4) ; Ultra DMA mode 4 and below are supported
380A6_wUDMA_MODE3_SUPRTD EQU (1<<3) ; Ultra DMA mode 3 and below are supported
381A6_wUDMA_MODE2_SUPRTD EQU (1<<2) ; Ultra DMA mode 2 and below are supported
382A6_wUDMA_MODE1_SUPRTD EQU (1<<1) ; Ultra DMA mode 1 and below are supported
383A6_wUDMA_MODE0_SUPRTD EQU (1<<0) ; Ultra DMA mode 0 is supported
384
385; ATA-6 Word 93, Hardware reset result
386A6_wReset_CBLID_BELOW EQU (1<<13) ; Device detected CBLID- above ViH
387A6_wReset_DEV1_PDIAG EQU (1<<11) ; Device 1 asserted PDIAG-
388A6_wReset_DEV0_RESP_D1 EQU (1<<6) ; Device 0 responds when Device 1 is selected
389A6_wReset_DEV0_DASP EQU (1<<5) ; Device 0 detected the assertion of DASP-
390A6_wReset_DEV0_PDIAG EQU (1<<4) ; Device 0 detected the assertion of PDIAG
391A6_wReset_DEV0_PASSED EQU (1<<3) ; Device 0 passed diagnostics
392A6_wReset_MASK_DEV1_DETERMINE EQU ((1<<10)|(1<<9)) ; These bits indicate how Device 1 determined the device number
393A6_wReset_MASK_DEV0_DETERMINE EQU ((1<<2)|(1<<1)) ; These bits indicate how Device 0 determined the device number:
394A6_wReset_RESERVED EQU 00b
395A6_wReset_JUMPER EQU 01b ; a jumper was used
396A6_wReset_CSEL EQU 10b ; the CSEL signal was used
397A6_wReset_UNKNOWN EQU 11b ; some other method was used or the method is unknown
398
399; ATA-6 Word 127, Removable Media Status Notification feature set support
400A6_wRMSN_SUPPORTED EQU (1<<0) ; Removable Media Status Notification feature supported
401
402; ATA-6 Word 128, Security status
403A6_wSecurity_MAX EQU (1<<8) ; Security level 0 = High, 1 = Maximum
404A6_wSecurity_ENH_ERASE EQU (1<<5) ; Enhanced security erase supported
405A6_wSecurity_EXPIRED EQU (1<<4) ; Security count expired
406A6_wSecurity_FROZEN EQU (1<<3) ; Security frozen
407A6_wSecurity_LOCKED EQU (1<<2) ; Security locked
408A6_wSecurity_ENABLED EQU (1<<1) ; Security enabled
409A6_wSecurity_SUPPORTED EQU (1<<0) ; Security supported
410
411; ATA-6 Word 160, CFA Power Mode 1
412A6_wCFAPower_WORDSUPP EQU (1<<15) ; Word 160 supported
413A6_wCFAPower_REQUIRED EQU (1<<13) ; CFA power mode 1 is required for one or more commands implemented by the device
414A6_wCFAPower_DISABLED EQU (1<<12) ; CFA power mode 1 disabled
415A6_wCFAPower_MASK_mA EQU 0FFFh ; Maximum current in mA
416
417
418%endif ; ATA_ID_INC
Note: See TracBrowser for help on using the repository browser.