[209] | 1 | //====================================================================== |
---|
| 2 | // |
---|
| 3 | // Project: XTIDE Universal BIOS, Serial Port Server |
---|
| 4 | // |
---|
| 5 | // File: process.cpp - Processes commands received over the serial port |
---|
| 6 | // |
---|
| 7 | |
---|
| 8 | #include "library.h" |
---|
| 9 | #include <memory.h> |
---|
| 10 | #include <string.h> |
---|
[219] | 11 | #include <stdio.h> |
---|
[209] | 12 | |
---|
| 13 | union _buff { |
---|
| 14 | struct { |
---|
| 15 | unsigned char command; |
---|
| 16 | unsigned char driveAndHead; |
---|
| 17 | unsigned char count; |
---|
| 18 | unsigned char sector; |
---|
| 19 | unsigned short cylinder; |
---|
| 20 | } chs; |
---|
| 21 | struct { |
---|
| 22 | unsigned char command; |
---|
| 23 | unsigned char bits24; |
---|
| 24 | unsigned char count; |
---|
| 25 | unsigned char bits00; |
---|
| 26 | unsigned char bits08; |
---|
| 27 | unsigned char bits16; |
---|
| 28 | } lba; |
---|
| 29 | struct { |
---|
| 30 | unsigned char command; |
---|
| 31 | unsigned char driveAndHead; |
---|
| 32 | unsigned char count; |
---|
[233] | 33 | unsigned char scan; |
---|
| 34 | unsigned char port; |
---|
| 35 | unsigned char baud; |
---|
[209] | 36 | } inquire; |
---|
| 37 | unsigned char b[514]; |
---|
| 38 | unsigned short w[257]; |
---|
| 39 | } buff; |
---|
| 40 | |
---|
| 41 | #define SERIAL_COMMAND_HEADER 0xa0 |
---|
| 42 | |
---|
| 43 | #define SERIAL_COMMAND_WRITE 1 |
---|
| 44 | #define SERIAL_COMMAND_READWRITE 2 |
---|
| 45 | #define SERIAL_COMMAND_RWMASK 3 |
---|
| 46 | #define SERIAL_COMMAND_INQUIRE 0 |
---|
| 47 | |
---|
| 48 | #define SERIAL_COMMAND_MASK 0xe3 |
---|
| 49 | #define SERIAL_COMMAND_HEADERMASK 0xe0 |
---|
| 50 | |
---|
[219] | 51 | #define ATA_COMMAND_LBA 0x40 |
---|
| 52 | #define ATA_COMMAND_HEADMASK 0xf |
---|
| 53 | |
---|
| 54 | #define ATA_DriveAndHead_Drive 0x10 |
---|
| 55 | |
---|
[210] | 56 | void logBuff( char *message, unsigned long buffoffset, unsigned long readto, int verboseLevel ) |
---|
| 57 | { |
---|
| 58 | char logBuff[ 514*9 + 10 ]; |
---|
| 59 | int logCount; |
---|
| 60 | |
---|
[213] | 61 | if( verboseLevel == 5 || (verboseLevel >= 3 && buffoffset == readto) ) |
---|
[210] | 62 | { |
---|
[213] | 63 | if( verboseLevel == 3 && buffoffset > 11 ) |
---|
[210] | 64 | logCount = 11; |
---|
| 65 | else |
---|
| 66 | logCount = buffoffset; |
---|
| 67 | |
---|
| 68 | for( int t = 0; t < logCount; t++ ) |
---|
| 69 | sprintf( &logBuff[t*9], "[%3d:%02x] ", t, buff.b[t] ); |
---|
| 70 | if( logCount != buffoffset ) |
---|
| 71 | sprintf( &logBuff[logCount*9], "... " ); |
---|
| 72 | |
---|
[211] | 73 | log( 3, "%s%s", message, logBuff ); |
---|
[210] | 74 | } |
---|
| 75 | } |
---|
| 76 | |
---|
[219] | 77 | void processRequests( SerialAccess *serial, Image *image0, Image *image1, int timeoutEnabled, int verboseLevel ) |
---|
[209] | 78 | { |
---|
| 79 | unsigned char workCommand; |
---|
| 80 | int workOffset, workCount; |
---|
| 81 | |
---|
| 82 | unsigned long mylba; |
---|
| 83 | unsigned long readto; |
---|
| 84 | unsigned long buffoffset; |
---|
| 85 | unsigned long lasttick; |
---|
| 86 | unsigned short crc; |
---|
| 87 | unsigned long GetTime_Timeout_Local; |
---|
| 88 | unsigned long len; |
---|
| 89 | Image *img; |
---|
| 90 | unsigned long cyl, sect, head; |
---|
[210] | 91 | unsigned long perfTimer; |
---|
[233] | 92 | unsigned char lastScan; |
---|
[209] | 93 | |
---|
| 94 | GetTime_Timeout_Local = GetTime_Timeout(); |
---|
| 95 | |
---|
| 96 | buffoffset = 0; |
---|
| 97 | readto = 0; |
---|
| 98 | workCount = workOffset = workCommand = 0; |
---|
[233] | 99 | lastScan = 0; |
---|
[215] | 100 | |
---|
[258] | 101 | // |
---|
| 102 | // Floppy disks must come after any hard disks |
---|
| 103 | // |
---|
| 104 | if( (image0 && image0->floppy) && (image1 && !image1->floppy) ) |
---|
| 105 | { |
---|
| 106 | img = image0; |
---|
| 107 | image0 = image1; |
---|
| 108 | image1 = img; |
---|
| 109 | } |
---|
| 110 | |
---|
[209] | 111 | lasttick = GetTime(); |
---|
| 112 | |
---|
[215] | 113 | while( (len = serial->readCharacters( &buff.b[buffoffset], (readto ? readto-buffoffset : 1) )) ) |
---|
[209] | 114 | { |
---|
| 115 | buffoffset += len; |
---|
| 116 | |
---|
[210] | 117 | // |
---|
| 118 | // For debugging, look at the incoming packet |
---|
| 119 | // |
---|
[213] | 120 | if( verboseLevel >= 3 ) |
---|
[210] | 121 | logBuff( " Received: ", buffoffset, readto, verboseLevel ); |
---|
[209] | 122 | |
---|
[215] | 123 | if( timeoutEnabled && readto && GetTime() > lasttick + GetTime_Timeout_Local ) |
---|
| 124 | { |
---|
| 125 | log( 1, "Timeout waiting on data from client, aborting previous command" ); |
---|
[209] | 126 | |
---|
[215] | 127 | workCount = workOffset = workCommand = 0; |
---|
| 128 | readto = 0; |
---|
| 129 | |
---|
| 130 | if( len <= 8 && (buff.b[buffoffset-len] & SERIAL_COMMAND_HEADERMASK) == SERIAL_COMMAND_HEADER ) |
---|
| 131 | { |
---|
| 132 | // assume that we are at the front of a new command |
---|
| 133 | // |
---|
| 134 | memcpy( &buff.b[0], &buff.b[buffoffset-len], len ); |
---|
| 135 | buffoffset = len; |
---|
| 136 | readto = 8; |
---|
| 137 | // fall through to normal processing |
---|
| 138 | } |
---|
| 139 | else if( len == 1 ) |
---|
| 140 | { |
---|
| 141 | // one new character, treat it like any other new character received, discarding the buffer |
---|
| 142 | // |
---|
| 143 | buff.b[0] = buff.b[buffoffset-1]; |
---|
| 144 | buffoffset = 1; |
---|
| 145 | // fall through to normal processing |
---|
| 146 | } |
---|
| 147 | else |
---|
| 148 | { |
---|
| 149 | // discard even the newly received data and start listening anew |
---|
| 150 | // |
---|
| 151 | buffoffset = 0; |
---|
| 152 | continue; |
---|
| 153 | } |
---|
[209] | 154 | } |
---|
| 155 | |
---|
| 156 | lasttick = GetTime(); |
---|
| 157 | |
---|
[210] | 158 | // |
---|
| 159 | // No work currently to do, look at each character as they come in... |
---|
| 160 | // |
---|
[215] | 161 | if( !readto ) |
---|
[209] | 162 | { |
---|
[215] | 163 | if( (buff.b[0] & SERIAL_COMMAND_HEADERMASK) == SERIAL_COMMAND_HEADER ) |
---|
[209] | 164 | { |
---|
[210] | 165 | // |
---|
| 166 | // Found our command header byte to start a commnad sequence, read the next 7 and evaluate |
---|
| 167 | // |
---|
[209] | 168 | readto = 8; |
---|
[210] | 169 | continue; |
---|
[209] | 170 | } |
---|
| 171 | else |
---|
| 172 | { |
---|
[210] | 173 | // |
---|
| 174 | // Spurious characters, discard |
---|
| 175 | // |
---|
[209] | 176 | if( verboseLevel >= 2 ) |
---|
| 177 | { |
---|
| 178 | if( buff.b[0] >= 0x20 && buff.b[0] <= 0x7e ) |
---|
[211] | 179 | log( 2, "Spurious: [%d:%c]", buff.b[0], buff.b[0] ); |
---|
[209] | 180 | else |
---|
[211] | 181 | log( 2, "Spurious: [%d]", buff.b[0] ); |
---|
[209] | 182 | } |
---|
| 183 | buffoffset = 0; |
---|
| 184 | continue; |
---|
| 185 | } |
---|
| 186 | } |
---|
| 187 | |
---|
| 188 | // |
---|
[210] | 189 | // Partial packet received, keep reading... |
---|
| 190 | // |
---|
| 191 | if( readto && buffoffset < readto ) |
---|
| 192 | continue; |
---|
| 193 | |
---|
| 194 | // |
---|
| 195 | // Read 512 bytes from serial port, only one command reads that many characters: Write Sector |
---|
| 196 | // |
---|
[209] | 197 | if( buffoffset == readto && readto == 514 ) |
---|
| 198 | { |
---|
| 199 | buffoffset = readto = 0; |
---|
| 200 | if( (crc = checksum( &buff.w[0], 256 )) != buff.w[256] ) |
---|
| 201 | { |
---|
[211] | 202 | log( 0, "Bad Write Sector Checksum" ); |
---|
[209] | 203 | continue; |
---|
| 204 | } |
---|
| 205 | |
---|
| 206 | if( img->readOnly ) |
---|
| 207 | { |
---|
[211] | 208 | log( 1, "Attempt to write to read-only image" ); |
---|
[209] | 209 | continue; |
---|
| 210 | } |
---|
| 211 | |
---|
| 212 | img->seekSector( mylba + workOffset ); |
---|
| 213 | img->writeSector( &buff.w[0] ); |
---|
| 214 | |
---|
[210] | 215 | // |
---|
| 216 | // Echo back the CRC |
---|
| 217 | // |
---|
[219] | 218 | if( !serial->writeCharacters( &buff.w[256], 2 ) ) |
---|
| 219 | break; |
---|
[209] | 220 | |
---|
| 221 | workOffset++; |
---|
| 222 | workCount--; |
---|
[215] | 223 | |
---|
| 224 | if( workCount ) |
---|
| 225 | readto = 1; // looking for continuation ACK |
---|
[209] | 226 | } |
---|
| 227 | |
---|
[210] | 228 | // |
---|
[209] | 229 | // 8 byte command received, or a continuation of the previous command |
---|
| 230 | // |
---|
| 231 | else if( (buffoffset == readto && readto == 8) || |
---|
| 232 | (buffoffset == readto && readto == 1 && workCount) ) |
---|
| 233 | { |
---|
| 234 | buffoffset = readto = 0; |
---|
| 235 | if( workCount ) |
---|
| 236 | { |
---|
[215] | 237 | if( verboseLevel > 1 ) |
---|
| 238 | log( 2, " Continuation: Offset=%u, Checksum=%04x", workOffset-1, buff.w[256] ); |
---|
| 239 | |
---|
[210] | 240 | // |
---|
| 241 | // Continuation... |
---|
| 242 | // |
---|
[209] | 243 | if( buff.b[0] != (workCount-0) ) |
---|
| 244 | { |
---|
[211] | 245 | log( 0, "Continue Fault: Received=%d, Expected=%d", buff.b[0], workCount ); |
---|
[209] | 246 | workCount = 0; |
---|
| 247 | continue; |
---|
| 248 | } |
---|
| 249 | } |
---|
| 250 | else |
---|
| 251 | { |
---|
[210] | 252 | // |
---|
| 253 | // New Command... |
---|
| 254 | // |
---|
[209] | 255 | if( (crc = checksum( &buff.w[0], 3 )) != buff.w[3] ) |
---|
| 256 | { |
---|
[215] | 257 | log( 0, "Bad Command Checksum: %02x %02x %02x %02x %02x %02x %02x %02x, Checksum=%04x", |
---|
[209] | 258 | buff.b[0], buff.b[1], buff.b[2], buff.b[3], buff.b[4], buff.b[5], buff.b[6], buff.b[7], crc); |
---|
| 259 | continue; |
---|
| 260 | } |
---|
| 261 | |
---|
[215] | 262 | img = (buff.inquire.driveAndHead & ATA_DriveAndHead_Drive) ? image1 : image0; |
---|
[209] | 263 | |
---|
| 264 | workCommand = buff.chs.command & SERIAL_COMMAND_RWMASK; |
---|
| 265 | |
---|
[217] | 266 | if( (workCommand != SERIAL_COMMAND_INQUIRE) && (buff.chs.driveAndHead & ATA_COMMAND_LBA) ) |
---|
[209] | 267 | { |
---|
| 268 | mylba = ((((unsigned long) buff.lba.bits24) & ATA_COMMAND_HEADMASK) << 24) |
---|
| 269 | | (((unsigned long) buff.lba.bits16) << 16) |
---|
| 270 | | (((unsigned long) buff.lba.bits08) << 8) |
---|
| 271 | | ((unsigned long) buff.lba.bits00); |
---|
| 272 | } |
---|
| 273 | else |
---|
| 274 | { |
---|
| 275 | cyl = buff.chs.cylinder; |
---|
| 276 | sect = buff.chs.sector; |
---|
| 277 | head = (buff.chs.driveAndHead & ATA_COMMAND_HEADMASK); |
---|
[215] | 278 | mylba = img ? (((cyl*img->head + head)*img->sect) + sect-1) : 0; |
---|
[209] | 279 | } |
---|
| 280 | |
---|
[215] | 281 | workOffset = 0; |
---|
| 282 | workCount = buff.chs.count; |
---|
| 283 | |
---|
| 284 | if( verboseLevel > 0 ) |
---|
| 285 | { |
---|
| 286 | char *comStr = (workCommand & SERIAL_COMMAND_WRITE ? "Write" : "Read"); |
---|
| 287 | |
---|
| 288 | if( workCommand == SERIAL_COMMAND_INQUIRE ) |
---|
| 289 | log( 1, "Inquire %d: Client Port=0x%x, Client Baud=%s", img == image0 ? 0 : 1, |
---|
[233] | 290 | ((unsigned short) buff.inquire.port) << 2, |
---|
| 291 | baudRateMatchDivisor( buff.inquire.baud )->display ); |
---|
[217] | 292 | else if( buff.chs.driveAndHead & ATA_COMMAND_LBA ) |
---|
[215] | 293 | log( 1, "%s %d: LBA=%u, Count=%u", comStr, img == image0 ? 0 : 1, |
---|
| 294 | mylba, workCount ); |
---|
| 295 | else |
---|
| 296 | log( 1, "%s %d: Cylinder=%u, Sector=%u, Head=%u, Count=%u, LBA=%u", comStr, img == image0 ? 0 : 1, |
---|
| 297 | cyl, sect, head, workCount, mylba ); |
---|
| 298 | } |
---|
| 299 | |
---|
| 300 | if( !img ) |
---|
| 301 | { |
---|
| 302 | log( 1, " No slave drive provided" ); |
---|
| 303 | workCount = 0; |
---|
| 304 | continue; |
---|
| 305 | } |
---|
| 306 | |
---|
[209] | 307 | if( (workCommand & SERIAL_COMMAND_WRITE) && img->readOnly ) |
---|
| 308 | { |
---|
[215] | 309 | log( 1, " Write attempt to Read Only disk" ); |
---|
| 310 | workCount = 0; |
---|
[209] | 311 | continue; |
---|
| 312 | } |
---|
| 313 | |
---|
[213] | 314 | if( verboseLevel > 0 && workCount > 100 ) |
---|
[210] | 315 | perfTimer = GetTime(); |
---|
[209] | 316 | } |
---|
| 317 | |
---|
| 318 | if( workCount && (workCommand == (SERIAL_COMMAND_WRITE | SERIAL_COMMAND_READWRITE)) ) |
---|
| 319 | { |
---|
[210] | 320 | // |
---|
| 321 | // Write command... Setup to receive a sector |
---|
| 322 | // |
---|
[209] | 323 | readto = 514; |
---|
| 324 | } |
---|
| 325 | else |
---|
| 326 | { |
---|
[210] | 327 | // |
---|
| 328 | // Inquire command... |
---|
| 329 | // |
---|
[209] | 330 | if( workCommand == SERIAL_COMMAND_INQUIRE ) |
---|
| 331 | { |
---|
[233] | 332 | unsigned char localScan; |
---|
| 333 | |
---|
[209] | 334 | if( serial->speedEmulation && |
---|
[233] | 335 | buff.inquire.baud != serial->baudRate->divisor ) |
---|
[209] | 336 | { |
---|
[215] | 337 | log( 1, " Ignoring Inquire with wrong baud rate" ); |
---|
[209] | 338 | workCount = 0; |
---|
| 339 | continue; |
---|
| 340 | } |
---|
| 341 | |
---|
[233] | 342 | localScan = buff.inquire.scan; // need to do this before the call to |
---|
| 343 | // img->respondInquire, as it will clear the buff |
---|
| 344 | img->respondInquire( &buff.w[0], serial->baudRate, |
---|
| 345 | ((unsigned short) buff.inquire.port) << 2, |
---|
| 346 | (img == image1 && lastScan) || buff.inquire.scan ); |
---|
| 347 | lastScan = localScan; |
---|
[209] | 348 | } |
---|
[210] | 349 | // |
---|
| 350 | // Read command... |
---|
| 351 | // |
---|
[209] | 352 | else |
---|
| 353 | { |
---|
| 354 | img->seekSector( mylba + workOffset ); |
---|
| 355 | img->readSector( &buff.w[0] ); |
---|
[233] | 356 | lastScan = 0; |
---|
[209] | 357 | } |
---|
| 358 | |
---|
| 359 | buff.w[256] = checksum( &buff.w[0], 256 ); |
---|
| 360 | |
---|
[219] | 361 | if( !serial->writeCharacters( &buff.w[0], 514 ) ) |
---|
| 362 | break; |
---|
[209] | 363 | |
---|
[215] | 364 | if( verboseLevel >= 3 ) |
---|
| 365 | logBuff( " Sending: ", 514, 514, verboseLevel ); |
---|
| 366 | |
---|
[209] | 367 | workCount--; |
---|
| 368 | workOffset++; |
---|
[215] | 369 | |
---|
| 370 | if( workCount ) |
---|
| 371 | readto = 1; // looking for continuation ACK |
---|
[209] | 372 | } |
---|
[210] | 373 | } |
---|
[209] | 374 | |
---|
[215] | 375 | if( workCount == 0 && workOffset > 100 ) |
---|
| 376 | log( 1, " Performance: %.2lf bytes per second", (512.0 * workOffset) / (GetTime() - perfTimer) * 1000.0 ); |
---|
[209] | 377 | } |
---|
| 378 | } |
---|
[210] | 379 | |
---|
| 380 | |
---|