[209] | 1 | //====================================================================== |
---|
| 2 | // |
---|
| 3 | // Project: XTIDE Universal BIOS, Serial Port Server |
---|
| 4 | // |
---|
| 5 | // File: process.cpp - Processes commands received over the serial port |
---|
| 6 | // |
---|
| 7 | |
---|
| 8 | #include "library.h" |
---|
| 9 | #include <memory.h> |
---|
| 10 | #include <string.h> |
---|
| 11 | |
---|
| 12 | union _buff { |
---|
| 13 | struct { |
---|
| 14 | unsigned char command; |
---|
| 15 | unsigned char driveAndHead; |
---|
| 16 | unsigned char count; |
---|
| 17 | unsigned char sector; |
---|
| 18 | unsigned short cylinder; |
---|
| 19 | } chs; |
---|
| 20 | struct { |
---|
| 21 | unsigned char command; |
---|
| 22 | unsigned char bits24; |
---|
| 23 | unsigned char count; |
---|
| 24 | unsigned char bits00; |
---|
| 25 | unsigned char bits08; |
---|
| 26 | unsigned char bits16; |
---|
| 27 | } lba; |
---|
| 28 | struct { |
---|
| 29 | unsigned char command; |
---|
| 30 | unsigned char driveAndHead; |
---|
| 31 | unsigned char count; |
---|
| 32 | unsigned char undefined1; |
---|
| 33 | unsigned char portAndBaud; |
---|
| 34 | unsigned char undefined2; |
---|
| 35 | } inquire; |
---|
| 36 | unsigned char b[514]; |
---|
| 37 | unsigned short w[257]; |
---|
| 38 | } buff; |
---|
| 39 | |
---|
| 40 | #define SERIAL_COMMAND_HEADER 0xa0 |
---|
| 41 | |
---|
| 42 | #define SERIAL_COMMAND_WRITE 1 |
---|
| 43 | #define SERIAL_COMMAND_READWRITE 2 |
---|
| 44 | #define SERIAL_COMMAND_RWMASK 3 |
---|
| 45 | #define SERIAL_COMMAND_INQUIRE 0 |
---|
| 46 | |
---|
| 47 | #define SERIAL_COMMAND_MASK 0xe3 |
---|
| 48 | #define SERIAL_COMMAND_HEADERMASK 0xe0 |
---|
| 49 | |
---|
[215] | 50 | #define SERIAL_INQUIRE_PORTANDBAUD_BAUDMASK 3 |
---|
| 51 | #define SERIAL_INQUIRE_PORTANDBAUD_PORTMASK 0xfc |
---|
| 52 | #define SERIAL_INQUIRE_PORTANDBAUD_STARTINGPORT 0x240 |
---|
[209] | 53 | |
---|
[215] | 54 | #define SERIAL_INQUIRE_PORTANDBAUD_PORTTRANSLATE( a ) ( ((a) & SERIAL_INQUIRE_PORTANDBAUD_PORT) << 1 | SERIAL_INQUIRE_PORTANDBAUD_STARTINGPORT ) |
---|
| 55 | |
---|
[210] | 56 | void logBuff( char *message, unsigned long buffoffset, unsigned long readto, int verboseLevel ) |
---|
| 57 | { |
---|
| 58 | char logBuff[ 514*9 + 10 ]; |
---|
| 59 | int logCount; |
---|
| 60 | |
---|
[213] | 61 | if( verboseLevel == 5 || (verboseLevel >= 3 && buffoffset == readto) ) |
---|
[210] | 62 | { |
---|
[213] | 63 | if( verboseLevel == 3 && buffoffset > 11 ) |
---|
[210] | 64 | logCount = 11; |
---|
| 65 | else |
---|
| 66 | logCount = buffoffset; |
---|
| 67 | |
---|
| 68 | for( int t = 0; t < logCount; t++ ) |
---|
| 69 | sprintf( &logBuff[t*9], "[%3d:%02x] ", t, buff.b[t] ); |
---|
| 70 | if( logCount != buffoffset ) |
---|
| 71 | sprintf( &logBuff[logCount*9], "... " ); |
---|
| 72 | |
---|
[211] | 73 | log( 3, "%s%s", message, logBuff ); |
---|
[210] | 74 | } |
---|
| 75 | } |
---|
| 76 | |
---|
[209] | 77 | void processRequests( Serial *serial, Image *image0, Image *image1, int timeoutEnabled, int verboseLevel ) |
---|
| 78 | { |
---|
| 79 | unsigned char workCommand; |
---|
| 80 | int workOffset, workCount; |
---|
| 81 | |
---|
| 82 | unsigned long mylba; |
---|
| 83 | unsigned long readto; |
---|
| 84 | unsigned long buffoffset; |
---|
| 85 | unsigned long lasttick; |
---|
| 86 | unsigned short crc; |
---|
| 87 | unsigned long GetTime_Timeout_Local; |
---|
| 88 | unsigned long len; |
---|
| 89 | Image *img; |
---|
| 90 | unsigned long cyl, sect, head; |
---|
[210] | 91 | unsigned long perfTimer; |
---|
[209] | 92 | |
---|
| 93 | GetTime_Timeout_Local = GetTime_Timeout(); |
---|
| 94 | |
---|
| 95 | buffoffset = 0; |
---|
| 96 | readto = 0; |
---|
| 97 | workCount = workOffset = workCommand = 0; |
---|
[215] | 98 | |
---|
[209] | 99 | lasttick = GetTime(); |
---|
| 100 | |
---|
[215] | 101 | while( (len = serial->readCharacters( &buff.b[buffoffset], (readto ? readto-buffoffset : 1) )) ) |
---|
[209] | 102 | { |
---|
| 103 | buffoffset += len; |
---|
| 104 | |
---|
[210] | 105 | // |
---|
| 106 | // For debugging, look at the incoming packet |
---|
| 107 | // |
---|
[213] | 108 | if( verboseLevel >= 3 ) |
---|
[210] | 109 | logBuff( " Received: ", buffoffset, readto, verboseLevel ); |
---|
[209] | 110 | |
---|
[215] | 111 | if( timeoutEnabled && readto && GetTime() > lasttick + GetTime_Timeout_Local ) |
---|
| 112 | { |
---|
| 113 | log( 1, "Timeout waiting on data from client, aborting previous command" ); |
---|
[209] | 114 | |
---|
[215] | 115 | workCount = workOffset = workCommand = 0; |
---|
| 116 | readto = 0; |
---|
| 117 | |
---|
| 118 | if( len <= 8 && (buff.b[buffoffset-len] & SERIAL_COMMAND_HEADERMASK) == SERIAL_COMMAND_HEADER ) |
---|
| 119 | { |
---|
| 120 | // assume that we are at the front of a new command |
---|
| 121 | // |
---|
| 122 | memcpy( &buff.b[0], &buff.b[buffoffset-len], len ); |
---|
| 123 | buffoffset = len; |
---|
| 124 | readto = 8; |
---|
| 125 | // fall through to normal processing |
---|
| 126 | } |
---|
| 127 | else if( len == 1 ) |
---|
| 128 | { |
---|
| 129 | // one new character, treat it like any other new character received, discarding the buffer |
---|
| 130 | // |
---|
| 131 | buff.b[0] = buff.b[buffoffset-1]; |
---|
| 132 | buffoffset = 1; |
---|
| 133 | // fall through to normal processing |
---|
| 134 | } |
---|
| 135 | else |
---|
| 136 | { |
---|
| 137 | // discard even the newly received data and start listening anew |
---|
| 138 | // |
---|
| 139 | buffoffset = 0; |
---|
| 140 | continue; |
---|
| 141 | } |
---|
[209] | 142 | } |
---|
| 143 | |
---|
| 144 | lasttick = GetTime(); |
---|
| 145 | |
---|
[210] | 146 | // |
---|
| 147 | // No work currently to do, look at each character as they come in... |
---|
| 148 | // |
---|
[215] | 149 | if( !readto ) |
---|
[209] | 150 | { |
---|
[215] | 151 | if( (buff.b[0] & SERIAL_COMMAND_HEADERMASK) == SERIAL_COMMAND_HEADER ) |
---|
[209] | 152 | { |
---|
[210] | 153 | // |
---|
| 154 | // Found our command header byte to start a commnad sequence, read the next 7 and evaluate |
---|
| 155 | // |
---|
[209] | 156 | readto = 8; |
---|
[210] | 157 | continue; |
---|
[209] | 158 | } |
---|
| 159 | else |
---|
| 160 | { |
---|
[210] | 161 | // |
---|
| 162 | // Spurious characters, discard |
---|
| 163 | // |
---|
[209] | 164 | if( verboseLevel >= 2 ) |
---|
| 165 | { |
---|
| 166 | if( buff.b[0] >= 0x20 && buff.b[0] <= 0x7e ) |
---|
[211] | 167 | log( 2, "Spurious: [%d:%c]", buff.b[0], buff.b[0] ); |
---|
[209] | 168 | else |
---|
[211] | 169 | log( 2, "Spurious: [%d]", buff.b[0] ); |
---|
[209] | 170 | } |
---|
| 171 | buffoffset = 0; |
---|
| 172 | continue; |
---|
| 173 | } |
---|
| 174 | } |
---|
| 175 | |
---|
| 176 | // |
---|
[210] | 177 | // Partial packet received, keep reading... |
---|
| 178 | // |
---|
| 179 | if( readto && buffoffset < readto ) |
---|
| 180 | continue; |
---|
| 181 | |
---|
| 182 | // |
---|
| 183 | // Read 512 bytes from serial port, only one command reads that many characters: Write Sector |
---|
| 184 | // |
---|
[209] | 185 | if( buffoffset == readto && readto == 514 ) |
---|
| 186 | { |
---|
| 187 | buffoffset = readto = 0; |
---|
| 188 | if( (crc = checksum( &buff.w[0], 256 )) != buff.w[256] ) |
---|
| 189 | { |
---|
[211] | 190 | log( 0, "Bad Write Sector Checksum" ); |
---|
[209] | 191 | continue; |
---|
| 192 | } |
---|
| 193 | |
---|
| 194 | if( img->readOnly ) |
---|
| 195 | { |
---|
[211] | 196 | log( 1, "Attempt to write to read-only image" ); |
---|
[209] | 197 | continue; |
---|
| 198 | } |
---|
| 199 | |
---|
| 200 | img->seekSector( mylba + workOffset ); |
---|
| 201 | img->writeSector( &buff.w[0] ); |
---|
| 202 | |
---|
[210] | 203 | // |
---|
| 204 | // Echo back the CRC |
---|
| 205 | // |
---|
[209] | 206 | if( serial->writeCharacters( &buff.w[256], 2 ) != 2 ) |
---|
[211] | 207 | log( 0, "Serial Port Write Error" ); |
---|
[209] | 208 | |
---|
| 209 | workOffset++; |
---|
| 210 | workCount--; |
---|
[215] | 211 | |
---|
| 212 | if( workCount ) |
---|
| 213 | readto = 1; // looking for continuation ACK |
---|
[209] | 214 | } |
---|
| 215 | |
---|
[210] | 216 | // |
---|
[209] | 217 | // 8 byte command received, or a continuation of the previous command |
---|
| 218 | // |
---|
| 219 | else if( (buffoffset == readto && readto == 8) || |
---|
| 220 | (buffoffset == readto && readto == 1 && workCount) ) |
---|
| 221 | { |
---|
| 222 | buffoffset = readto = 0; |
---|
| 223 | if( workCount ) |
---|
| 224 | { |
---|
[215] | 225 | if( verboseLevel > 1 ) |
---|
| 226 | log( 2, " Continuation: Offset=%u, Checksum=%04x", workOffset-1, buff.w[256] ); |
---|
| 227 | |
---|
[210] | 228 | // |
---|
| 229 | // Continuation... |
---|
| 230 | // |
---|
[209] | 231 | if( buff.b[0] != (workCount-0) ) |
---|
| 232 | { |
---|
[211] | 233 | log( 0, "Continue Fault: Received=%d, Expected=%d", buff.b[0], workCount ); |
---|
[209] | 234 | workCount = 0; |
---|
| 235 | continue; |
---|
| 236 | } |
---|
| 237 | } |
---|
| 238 | else |
---|
| 239 | { |
---|
[210] | 240 | // |
---|
| 241 | // New Command... |
---|
| 242 | // |
---|
[209] | 243 | if( (crc = checksum( &buff.w[0], 3 )) != buff.w[3] ) |
---|
| 244 | { |
---|
[215] | 245 | log( 0, "Bad Command Checksum: %02x %02x %02x %02x %02x %02x %02x %02x, Checksum=%04x", |
---|
[209] | 246 | buff.b[0], buff.b[1], buff.b[2], buff.b[3], buff.b[4], buff.b[5], buff.b[6], buff.b[7], crc); |
---|
| 247 | continue; |
---|
| 248 | } |
---|
| 249 | |
---|
[215] | 250 | img = (buff.inquire.driveAndHead & ATA_DriveAndHead_Drive) ? image1 : image0; |
---|
[209] | 251 | |
---|
| 252 | workCommand = buff.chs.command & SERIAL_COMMAND_RWMASK; |
---|
| 253 | |
---|
[217] | 254 | if( (workCommand != SERIAL_COMMAND_INQUIRE) && (buff.chs.driveAndHead & ATA_COMMAND_LBA) ) |
---|
[209] | 255 | { |
---|
| 256 | mylba = ((((unsigned long) buff.lba.bits24) & ATA_COMMAND_HEADMASK) << 24) |
---|
| 257 | | (((unsigned long) buff.lba.bits16) << 16) |
---|
| 258 | | (((unsigned long) buff.lba.bits08) << 8) |
---|
| 259 | | ((unsigned long) buff.lba.bits00); |
---|
| 260 | } |
---|
| 261 | else |
---|
| 262 | { |
---|
| 263 | cyl = buff.chs.cylinder; |
---|
| 264 | sect = buff.chs.sector; |
---|
| 265 | head = (buff.chs.driveAndHead & ATA_COMMAND_HEADMASK); |
---|
[215] | 266 | mylba = img ? (((cyl*img->head + head)*img->sect) + sect-1) : 0; |
---|
[209] | 267 | } |
---|
| 268 | |
---|
[215] | 269 | workOffset = 0; |
---|
| 270 | workCount = buff.chs.count; |
---|
| 271 | |
---|
| 272 | if( verboseLevel > 0 ) |
---|
| 273 | { |
---|
| 274 | char *comStr = (workCommand & SERIAL_COMMAND_WRITE ? "Write" : "Read"); |
---|
| 275 | |
---|
| 276 | if( workCommand == SERIAL_COMMAND_INQUIRE ) |
---|
| 277 | log( 1, "Inquire %d: Client Port=0x%x, Client Baud=%s", img == image0 ? 0 : 1, |
---|
| 278 | ((buff.inquire.portAndBaud & SERIAL_INQUIRE_PORTANDBAUD_PORTMASK) << 1) |
---|
| 279 | + SERIAL_INQUIRE_PORTANDBAUD_STARTINGPORT, |
---|
| 280 | baudRateMatchDivisor( buff.inquire.portAndBaud & SERIAL_INQUIRE_PORTANDBAUD_BAUDMASK )->display ); |
---|
[217] | 281 | else if( buff.chs.driveAndHead & ATA_COMMAND_LBA ) |
---|
[215] | 282 | log( 1, "%s %d: LBA=%u, Count=%u", comStr, img == image0 ? 0 : 1, |
---|
| 283 | mylba, workCount ); |
---|
| 284 | else |
---|
| 285 | log( 1, "%s %d: Cylinder=%u, Sector=%u, Head=%u, Count=%u, LBA=%u", comStr, img == image0 ? 0 : 1, |
---|
| 286 | cyl, sect, head, workCount, mylba ); |
---|
| 287 | } |
---|
| 288 | |
---|
| 289 | if( !img ) |
---|
| 290 | { |
---|
| 291 | log( 1, " No slave drive provided" ); |
---|
| 292 | workCount = 0; |
---|
| 293 | continue; |
---|
| 294 | } |
---|
| 295 | |
---|
[209] | 296 | if( (workCommand & SERIAL_COMMAND_WRITE) && img->readOnly ) |
---|
| 297 | { |
---|
[215] | 298 | log( 1, " Write attempt to Read Only disk" ); |
---|
| 299 | workCount = 0; |
---|
[209] | 300 | continue; |
---|
| 301 | } |
---|
| 302 | |
---|
[213] | 303 | if( verboseLevel > 0 && workCount > 100 ) |
---|
[210] | 304 | perfTimer = GetTime(); |
---|
[209] | 305 | } |
---|
| 306 | |
---|
| 307 | if( workCount && (workCommand == (SERIAL_COMMAND_WRITE | SERIAL_COMMAND_READWRITE)) ) |
---|
| 308 | { |
---|
[210] | 309 | // |
---|
| 310 | // Write command... Setup to receive a sector |
---|
| 311 | // |
---|
[209] | 312 | readto = 514; |
---|
| 313 | } |
---|
| 314 | else |
---|
| 315 | { |
---|
[210] | 316 | // |
---|
| 317 | // Inquire command... |
---|
| 318 | // |
---|
[209] | 319 | if( workCommand == SERIAL_COMMAND_INQUIRE ) |
---|
| 320 | { |
---|
| 321 | if( serial->speedEmulation && |
---|
[215] | 322 | (buff.inquire.portAndBaud & SERIAL_INQUIRE_PORTANDBAUD_BAUDMASK) != serial->baudRate->divisor ) |
---|
[209] | 323 | { |
---|
[215] | 324 | log( 1, " Ignoring Inquire with wrong baud rate" ); |
---|
[209] | 325 | workCount = 0; |
---|
| 326 | continue; |
---|
| 327 | } |
---|
| 328 | |
---|
| 329 | img->respondInquire( &buff.w[0], serial->baudRate, buff.inquire.portAndBaud ); |
---|
| 330 | } |
---|
[210] | 331 | // |
---|
| 332 | // Read command... |
---|
| 333 | // |
---|
[209] | 334 | else |
---|
| 335 | { |
---|
| 336 | img->seekSector( mylba + workOffset ); |
---|
| 337 | img->readSector( &buff.w[0] ); |
---|
| 338 | } |
---|
| 339 | |
---|
| 340 | buff.w[256] = checksum( &buff.w[0], 256 ); |
---|
| 341 | |
---|
| 342 | if( serial->writeCharacters( &buff.w[0], 514 ) != 514 ) |
---|
[211] | 343 | log( 0, "Serial Port Write Error" ); |
---|
[209] | 344 | |
---|
[215] | 345 | if( verboseLevel >= 3 ) |
---|
| 346 | logBuff( " Sending: ", 514, 514, verboseLevel ); |
---|
| 347 | |
---|
[209] | 348 | workCount--; |
---|
| 349 | workOffset++; |
---|
[215] | 350 | |
---|
| 351 | if( workCount ) |
---|
| 352 | readto = 1; // looking for continuation ACK |
---|
[209] | 353 | } |
---|
[210] | 354 | } |
---|
[209] | 355 | |
---|
[215] | 356 | if( workCount == 0 && workOffset > 100 ) |
---|
| 357 | log( 1, " Performance: %.2lf bytes per second", (512.0 * workOffset) / (GetTime() - perfTimer) * 1000.0 ); |
---|
[209] | 358 | } |
---|
| 359 | } |
---|
[210] | 360 | |
---|
| 361 | |
---|