source: xtideuniversalbios/trunk/Serial_Server/library/Library.h@ 624

Last change on this file since 624 was 589, checked in by Krister Nordvall, 8 years ago

Changes:

  • BIOS: Fixed a purely cosmetic bug from r542 where, in builds containing MODULE_EBIOS, the boot menu would display an incorrect drive size (0.4 kB with MODULE_STRINGS_COMPRESSED or 0.5 kB without) for old drives with no support for LBA.
  • Fixed a bug from r392 where Vision_DetectAndReturnIDinAXandPortInDXifControllerPresent would return the ID in AL instead of AH (if DANGEROUS_DETECTION had been defined).
  • Fixed a bug from r587 in AdvAtaInit.asm that would prevent detection of QDI Vision controllers.
  • Also changed how the QDI Vision IDs are defined (removed the need for shifting) to avoid confusion. This fixed a potential bug from r587 in AdvAtaInit.asm where some IDs were not being shifted.
  • Fixed a bug in PDC20x30.asm from r587 where GetPdcIDtoAX would not return with the IDE base port in DX so DisablePdcProgrammingMode would fail.
  • Made some changes to ModuleDependency.inc and other files so that MODULE_ADVANCED_ATA now requires USE_386. Consequently it is no longer included in the regular AT-builds, only in the 386_8k-build.
  • Moved the UNROLL_SECTORS_IN_CX_TO_xWORDS macros from IDE_8bit.inc to IdeIO.inc which means it's now possible to build a BIOS without MODULE_8BIT_IDE.
  • XTIDECFG: Added a minimum DOS version check (since it needs DOS version 2+) to allow the program to quit gracefully in the unlikely scenario where someone tries to run it under DOS version 1.
  • Made some changes to Drive.asm to improve drive enumeration. The old method using GET_DOS_DRIVE_PARAMETER_BLOCK_FOR_SPECIFIC_DRIVE worked well in Windows XP but not in Windows 98 SE (in Windows or in DOS mode). The two problems were; 1) The function call would access the drives which on single floppy drive systems would cause Windows to swap between A: and B: (throwing a blue screen asking the user to insert a disk etc). 2) Only floppy drives and FAT16 drives would be available in the list of drives, no FAT32/optical/network drives.
  • Improved code in IdeControllerMenu.asm so that the default port addresses for all IDE interfaces are now restored when (re-)selecting the (same) type of IDE device.
  • Also made it impossible to select a device type unless the required module is included in the loaded BIOS.
  • The version check done when loading a BIOS now uses the FLASH_SIGNATURE definition from Version.inc. Any changes affecting RomVars now only requires updating that definition. This means that changes to RomVars must be implemented in both the BIOS and XTIDECFG before being committed to the repository.
  • Added a compatibility fix for 3Com 3C503 cards to the ROM checksumming code in Buffers.asm (Buffers_GenerateChecksum).
  • SerDrive: Made some minor changes to file names and paths to improve compatibility with case sensitive environments.
  • BIOSDRVS: Made a minor size optimization which as a side effect also makes it compatible with all DOS versions including DOS version 1.
  • Library: Renamed the WAIT_RETRACE_IF_NECESSARY_THEN macro to CALL_WAIT_FOR_RETRACE_IF_NECESSARY_THEN and made a tail-call-optimized version of it (JMP_WAIT_FOR_RETRACE_IF_NECESSARY_THEN).
  • A speed optimization to the eRCL_IM macro for 386 and higher. This change breaks emulation in the sense that the macro will fail when given a memory operand as the first parameter.
  • Other minor optimizations and fixes.
File size: 3.0 KB
Line 
1//======================================================================
2//
3// Project: XTIDE Universal BIOS, Serial Port Server
4//
5// File: Library.h - Include file for users of the library
6//
7
8//
9// XTIDE Universal BIOS and Associated Tools
10// Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
11//
12// This program is free software; you can redistribute it and/or modify
13// it under the terms of the GNU General Public License as published by
14// the Free Software Foundation; either version 2 of the License, or
15// (at your option) any later version.
16//
17// This program is distributed in the hope that it will be useful,
18// but WITHOUT ANY WARRANTY; without even the implied warranty of
19// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20// GNU General Public License for more details.
21// Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
22//
23
24#ifndef LIBRARY_H_INCLUDED
25#define LIBRARY_H_INCLUDED
26
27#define SERIAL_SERVER_MAJORVERSION 1
28#define SERIAL_SERVER_MINORVERSION 0
29
30void log( int level, char *message, ... );
31
32unsigned long GetTime(void);
33unsigned long GetTime_Timeout(void);
34
35unsigned short checksum( unsigned short *wbuff, int wlen );
36
37struct floppyInfo {
38 unsigned char real;
39 unsigned long size;
40 unsigned char type;
41 unsigned char cylinders;
42 unsigned char heads;
43 unsigned char sectors;
44};
45
46struct floppyInfo *FindFloppyInfoBySize( double size );
47
48class Image
49{
50public:
51 virtual void seekSector( unsigned long lba ) = 0;
52
53 virtual void writeSector( void *buff ) = 0;
54
55 virtual void readSector( void *buff ) = 0;
56
57 Image( char *name, int p_readOnly, int p_drive );
58 Image( char *name, int p_readOnly, int p_drive, int p_create, unsigned long p_lba );
59 Image( char *name, int p_readOnly, int p_drive, int p_create, unsigned long p_cyl, unsigned long p_head, unsigned long p_sect, int p_useCHS );
60
61 virtual ~Image() {};
62
63 unsigned long cyl, sect, head;
64 unsigned char floppy, floppyType;
65 int useCHS;
66
67 unsigned long totallba;
68
69 char *shortFileName;
70 int readOnly;
71 int drive;
72
73 static int parseGeometry( char *str, unsigned long *p_cyl, unsigned long *p_head, unsigned long *p_sect );
74
75 void respondInquire( unsigned short *buff, unsigned short originalPortAndBaud, struct baudRate *baudRate, unsigned short port, unsigned char scan );
76
77 void init( char *name, int p_readOnly, int p_drive, unsigned long p_cyl, unsigned long p_head, unsigned long p_sect, int p_useCHS );
78};
79
80struct baudRate {
81 unsigned long rate;
82 unsigned char divisor;
83 char *display;
84};
85struct baudRate *baudRateMatchString( char *str );
86struct baudRate *baudRateMatchDivisor( unsigned char divisor );
87
88#ifdef WIN32
89#include "../win32/Win32Serial.h"
90#else
91// there is no standard way to read/write and configure the serial port, OS specific only
92#endif
93
94#ifdef WIN32
95#include "../win32/Win32File.h"
96#else
97#include "File.h"
98#endif
99
100void processRequests( SerialAccess *serial, Image *image0, Image *image1, int timeoutEnabled, int verboseLevel );
101
102#endif
Note: See TracBrowser for help on using the repository browser.