source: xtideuniversalbios/trunk/BIOS_Drive_Information_Tool/Src/Print.asm@ 619

Last change on this file since 619 was 592, checked in by Krister Nordvall, 6 years ago

Changes:

  • The problem with NASM in the previous revision (r591) has been fixed.
  • The colors used by the boot menu and hotkey bar can now be customized by selecting one of a number of pre-defined color themes. Suggestions for additional themes are more than welcome!
  • Large builds are now 10 KB. Small builds are still 8 KB with the exception of the Tiny build which is now 4 KB. In other words, builds are now as small as possible to make it easier to combine them with other BIOSes.
  • Added code to the library to improve drive error handling. XTIDECFG can now handle "Drive Not Ready" errors.
  • Fixed a couple of potential bugs in AtaID.asm (AtaID_GetMaxPioModeToAXandMinCycleTimeToCX); 1) ATA1.bPioMode was treated as a WORD variable. 2) ATA2.bPIOSupp was assumed to be non-zero which would result in PIO mode 3 being returned if the assumption was wrong.
  • Made the same changes in the equivalent function used by BIOSDRVS (DisplayPioModeInformationUsingAtaInfoFromDSBX in AtaInfo.asm).
  • Fixed a bug from r587 in PDC20x30.asm in PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX.
  • Fixed a bug from r523 in XTIDECFG where Auto Configure would only set the IRQ on one IDE interface on AT-builds.
  • XTIDECFG will now restore the default settings for the "Serial port virtual device" when reselecting it in the list of device types. This makes it behave consistently for all device types.
  • The eAAM macro is now used regardless if USE_UNDOC_INTEL is defined or not because it is apparently supported on all processors including the NEC V20/V30 CPUs.
  • Renamed the EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS define to EXCLUDE_FROM_XUB.
  • Added a define to exclude unused library code from BIOSDRVS (EXCLUDE_FROM_BIOSDRVS). This makes it a lot smaller than in previous revisions.
  • All unnecessary CLD-instructions are now under a new define 'CLD_NEEDED' which is only enabled for the BIOS. It is disabled for XTIDECFG and BIOSDRVS but can be enabled if needed by adding this define to the respective makefile. This change was made because these unnecessary instructions are wasteful and should never be needed. In fact, they only serve to hide bugs (in other peoples code) which I strongly believe should be avoided. I recommend people making their own BIOSes from source to not use this define as it's extremely unlikely to be needed.
  • Updated the copyright info in SerDrive and changed an URL to point to the new site.
  • Updated the copyright info and version number in BIOSDRVS.
  • Updated the copyright info in XTIDECFG.
  • Optimizations in general.
File size: 7.5 KB
Line 
1; Project name : BIOS Drive Information Tool
2; Description : Functions to print information read from BIOS.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Print_SetCharacterOutputToSTDOUT
25; Parameters:
26; Nothing
27; Returns:
28; Nothing
29; Corrupts registers:
30; AX, BX, DI
31;--------------------------------------------------------------------
32Print_SetCharacterOutputToSTDOUT:
33 mov bl, ATTRIBUTES_NOT_USED
34 mov ax, DosCharOut
35 JMP_DISPLAY_LIBRARY SetCharOutputFunctionFromAXwithAttribFlagInBL
36
37
38;--------------------------------------------------------------------
39; Use DOS standard output so strings can be redirected to a file.
40;
41; DosCharOut
42; Parameters:
43; AL: Character to output
44; Returns:
45; Nothing
46; Corrupts registers:
47; AX, DX
48;--------------------------------------------------------------------
49DosCharOut:
50 xchg dx, ax
51 mov ah, WRITE_CHARACTER_TO_STANDARD_OUTPUT
52 int DOS_INTERRUPT_21h
53 ret
54
55
56;---------------------------------------------------------------------
57; Print_ErrorMessageFromAHifError
58; Parameters:
59; AH: BIOS error code
60; CF: Set if error, cleared otherwise
61; Returns:
62; Nothing
63; Corrupts registers:
64; AX, BP, SI, DI (CF remains unchanged)
65;--------------------------------------------------------------------
66Print_ErrorMessageFromAHifError:
67 jnc SHORT .NoErrors
68 eMOVZX ax, ah
69 mov si, g_szBiosError
70 call Print_FormatStringFromSIwithParameterInAX
71 stc ; Keep the CF set
72ALIGN JUMP_ALIGN, ret
73.NoErrors:
74 ret
75
76
77;---------------------------------------------------------------------
78; Print_DriveNumberFromDLusingFormatStringInSI
79; Parameters:
80; DL: Drive Number
81; SI: Offset to format string
82; Returns:
83; Nothing
84; Corrupts registers:
85; AX, BP, DI
86;--------------------------------------------------------------------
87Print_DriveNumberFromDLusingFormatStringInSI:
88 eMOVZX ax, dl
89 ; Fall to Print_FormatStringFromSIwithParameterInAX
90
91
92;---------------------------------------------------------------------
93; Print_FormatStringFromSIwithParameterInAX
94; Print_FormatStringFromSIwithParametersInAXDX
95; Print_FormatStringFromSIwithParametersInAXDXCX
96; Parameters:
97; AX: Format parameter 1
98; DX: Format parameter 2
99; CX: Format parameter 3
100; SI: Offset to format string
101; Returns:
102; Nothing
103; Corrupts registers:
104; AX, BP, DI
105;--------------------------------------------------------------------
106Print_FormatStringFromSIwithParameterInAX:
107 mov bp, sp
108 push ax
109 jmp JumpToFormatNullTerminatedStringFromSI
110
111Print_FormatStringFromSIwithParametersInAXDX:
112 mov bp, sp
113 push ax
114 push dx
115 jmp JumpToFormatNullTerminatedStringFromSI
116
117Print_FormatStringFromSIwithParametersInAXDXCX:
118 mov bp, sp
119 push ax
120 push dx
121 push cx
122 jmp SHORT JumpToFormatNullTerminatedStringFromSI
123
124
125;---------------------------------------------------------------------
126; Print_ModeFromDLandCHSfromAXBLBH
127; Parameters:
128; AX: Number of L-CHS cylinders (1...1024)
129; BL: Number of L-CHS heads (1...255)
130; BH: Number of L-CHS sectors per track (1...63)
131; DL: CHS Translate Mode
132; Returns:
133; Nothing
134; Corrupts registers:
135; AX, BP, SI, DI
136;--------------------------------------------------------------------
137Print_ModeFromDLandCHSfromAXLBH:
138 mov bp, sp
139
140 ; Push CHS parameters
141 ePUSH_T si, g_szFormatCHS
142 push ax ; Cylinders
143 eMOVZX ax, bl
144 push ax ; Heads
145 mov al, bh
146 push ax ; Sectors per track
147
148 ; Push translation mode
149 xor dh, dh
150 mov si, dx
151 eSHL_IM si, 1 ; Shift for WORD lookup
152 push WORD [si+.rgszXlateModeToString]
153
154 mov si, g_szChsAndMode
155 jmp SHORT JumpToFormatNullTerminatedStringFromSI
156
157.rgszXlateModeToString:
158 dw g_szNormal
159 dw g_szLarge
160 dw g_szLBA
161
162
163;---------------------------------------------------------------------
164; Print_CHSfromCXDXAX
165; Parameters:
166; CX: Number of cylinders (1...16383)
167; DX: Number of heads (1...255)
168; AX: Sectors per track (1...63)
169; Returns:
170; Nothing
171; Corrupts registers:
172; AX, BP, DI
173;--------------------------------------------------------------------
174Print_CHSfromCXDXAX:
175 push si
176
177 mov bp, sp
178 push cx
179 push dx
180 push ax
181 mov si, g_szFormatCHS
182 CALL_DISPLAY_LIBRARY FormatNullTerminatedStringFromCSSI
183 CALL_DISPLAY_LIBRARY PrintNewlineCharacters
184
185 pop si
186 ret
187
188
189;---------------------------------------------------------------------
190; Print_NameFromAtaInfoInBX
191; Parameters:
192; DS:BX: Ptr to ATA information
193; Returns:
194; Nothing
195; Corrupts registers:
196; AX, CX, BP, SI, DI
197;--------------------------------------------------------------------
198Print_NameFromAtaInfoInBX:
199%ifdef CLD_NEEDED
200 cld
201%endif
202 mov bp, sp
203 lea si, [bx+ATA1.strModel]
204 push si
205 mov di, si
206 mov cx, A1_MODEL_NUMBER_LENGTH/2
207ALIGN JUMP_ALIGN
208.ReverseNextWord:
209 lodsw
210 xchg al, ah
211 stosw
212 loop .ReverseNextWord
213 dec di
214 xchg cx, ax
215 stosb ; Terminate with NULL
216
217 mov si, g_szFormatDrvName
218 jmp SHORT JumpToFormatNullTerminatedStringFromSI
219
220
221;---------------------------------------------------------------------
222; Print_TotalSectorsFromBXDXAX
223; Parameters:
224; BX:DX:AX: Total number of sectors
225; Returns:
226; Nothing
227; Corrupts registers:
228; AX, BX, BP, DI
229;--------------------------------------------------------------------
230Print_TotalSectorsFromBXDXAX:
231 ePUSH_T di, 0
232 push bx
233 push dx
234 push ax
235 mov bp, sp
236 mov bx, 10
237 CALL_DISPLAY_LIBRARY PrintQWordFromSSBPwithBaseInBX
238 add sp, BYTE 8
239
240 push si
241 mov si, g_szNewline
242 call Print_NullTerminatedStringFromSI
243 pop si
244
245 ret
246
247
248;---------------------------------------------------------------------
249; Print_EbiosVersionFromBXandExtensionsFromCX
250; Parameters:
251; BX: Version of extensions
252; CX: Interface support bit map
253; Returns:
254; Nothing
255; Corrupts registers:
256; AX, BP, SI, DI
257;--------------------------------------------------------------------
258Print_EbiosVersionFromBXandExtensionsFromCX:
259 mov bp, sp
260 push bx
261 push cx
262 mov si, g_szNewExtensions
263 ; Fall to JumpToFormatNullTerminatedStringFromSI
264
265
266;---------------------------------------------------------------------
267; JumpToFormatNullTerminatedStringFromSI
268; Parameters:
269; BP: SP before pushing parameters
270; CS:SI: Ptr to format string
271; Returns:
272; Pushed parameters are cleaned from stack
273; Corrupts registers:
274; AX, DI
275;--------------------------------------------------------------------
276JumpToFormatNullTerminatedStringFromSI:
277 JMP_DISPLAY_LIBRARY FormatNullTerminatedStringFromCSSI
278
279
280;---------------------------------------------------------------------
281; Print_NullTerminatedStringFromSI
282; Parameters:
283; CS:SI: Ptr to string to display
284; Returns:
285; Nothing
286; Corrupts registers:
287; AX, DI
288;--------------------------------------------------------------------
289Print_NullTerminatedStringFromSI:
290 JMP_DISPLAY_LIBRARY PrintNullTerminatedStringFromCSSI
291
Note: See TracBrowser for help on using the repository browser.