source: xtideuniversalbios/trunk/Assembly_Library/Src/Util/Memory.asm@ 594

Last change on this file since 594 was 592, checked in by Krister Nordvall, 6 years ago

Changes:

  • The problem with NASM in the previous revision (r591) has been fixed.
  • The colors used by the boot menu and hotkey bar can now be customized by selecting one of a number of pre-defined color themes. Suggestions for additional themes are more than welcome!
  • Large builds are now 10 KB. Small builds are still 8 KB with the exception of the Tiny build which is now 4 KB. In other words, builds are now as small as possible to make it easier to combine them with other BIOSes.
  • Added code to the library to improve drive error handling. XTIDECFG can now handle "Drive Not Ready" errors.
  • Fixed a couple of potential bugs in AtaID.asm (AtaID_GetMaxPioModeToAXandMinCycleTimeToCX); 1) ATA1.bPioMode was treated as a WORD variable. 2) ATA2.bPIOSupp was assumed to be non-zero which would result in PIO mode 3 being returned if the assumption was wrong.
  • Made the same changes in the equivalent function used by BIOSDRVS (DisplayPioModeInformationUsingAtaInfoFromDSBX in AtaInfo.asm).
  • Fixed a bug from r587 in PDC20x30.asm in PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX.
  • Fixed a bug from r523 in XTIDECFG where Auto Configure would only set the IRQ on one IDE interface on AT-builds.
  • XTIDECFG will now restore the default settings for the "Serial port virtual device" when reselecting it in the list of device types. This makes it behave consistently for all device types.
  • The eAAM macro is now used regardless if USE_UNDOC_INTEL is defined or not because it is apparently supported on all processors including the NEC V20/V30 CPUs.
  • Renamed the EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS define to EXCLUDE_FROM_XUB.
  • Added a define to exclude unused library code from BIOSDRVS (EXCLUDE_FROM_BIOSDRVS). This makes it a lot smaller than in previous revisions.
  • All unnecessary CLD-instructions are now under a new define 'CLD_NEEDED' which is only enabled for the BIOS. It is disabled for XTIDECFG and BIOSDRVS but can be enabled if needed by adding this define to the respective makefile. This change was made because these unnecessary instructions are wasteful and should never be needed. In fact, they only serve to hide bugs (in other peoples code) which I strongly believe should be avoided. I recommend people making their own BIOSes from source to not use this define as it's extremely unlikely to be needed.
  • Updated the copyright info in SerDrive and changed an URL to point to the new site.
  • Updated the copyright info and version number in BIOSDRVS.
  • Updated the copyright info in XTIDECFG.
  • Optimizations in general.
File size: 4.5 KB
Line 
1; Project name : Assembly Library
2; Description : Functions for memory access.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; OPTIMIZE_STRING_OPERATION
25; Parameters
26; %1: String instruction without size (only MOVS and STOS is supported)
27; CX: Number of BYTEs to operate
28; DS:SI: Ptr to source data (for MOVS)
29; ES:DI: Ptr to destination
30; Returns:
31; CF: Cleared
32; CX: Zero
33; SI, DI: Updated by number of bytes operated
34; Corrupts registers:
35; Nothing
36;--------------------------------------------------------------------
37%macro OPTIMIZE_STRING_OPERATION 1
38 shr cx, 1
39 rep %1w
40 eRCL_IM cx, 1
41 rep %1b
42%endmacro
43
44
45;--------------------------------------------------------------------
46; Memory_CopyCXbytesFromDSSItoESDI
47; Parameters
48; CX: Number of bytes to copy
49; DS:SI: Ptr to source data
50; ES:DI: Ptr to destination buffer
51; Returns:
52; CF: Cleared
53; SI, DI: Updated by number of bytes copied
54; Corrupts registers:
55; Nothing
56;--------------------------------------------------------------------
57%ifndef EXCLUDE_FROM_XUB
58ALIGN JUMP_ALIGN
59Memory_CopyCXbytesFromDSSItoESDI:
60 push cx
61 OPTIMIZE_STRING_OPERATION movs
62 pop cx
63 ret
64%endif
65
66
67;--------------------------------------------------------------------
68; Memory_ZeroSSBPwithSizeInCX
69; Parameters
70; CX: Number of bytes to zero
71; SS:BP: Ptr to buffer to zero
72; Returns:
73; Nothing
74; Corrupts registers:
75; CX
76;--------------------------------------------------------------------
77%ifdef INCLUDE_MENU_LIBRARY
78ALIGN JUMP_ALIGN
79Memory_ZeroSSBPwithSizeInCX:
80 push es
81 push di
82 push ax
83 call Registers_CopySSBPtoESDI
84 call Memory_ZeroESDIwithSizeInCX
85 pop ax
86 pop di
87 pop es
88 ret
89%endif
90
91
92;--------------------------------------------------------------------
93; Memory_ZeroESDIwithSizeInCX
94; Parameters
95; CX: Number of bytes to zero
96; ES:DI: Ptr to destination buffer
97; Returns:
98; DI: Updated by number of BYTEs stored
99; Corrupts registers:
100; AX, CX
101;--------------------------------------------------------------------
102ALIGN JUMP_ALIGN
103Memory_ZeroESDIwithSizeInCX:
104 xor ax, ax
105 ; Fall to Memory_StoreCXbytesFromAccumToESDI
106
107;--------------------------------------------------------------------
108; Memory_StoreCXbytesFromAccumToESDI
109; Parameters
110; AX: Word to use to fill buffer
111; CX: Number of BYTEs to store
112; ES:DI: Ptr to destination buffer
113; Returns:
114; DI: Updated by number of BYTEs stored
115; Corrupts registers:
116; CX
117;--------------------------------------------------------------------
118Memory_StoreCXbytesFromAccumToESDI:
119 OPTIMIZE_STRING_OPERATION stos
120 ret
121
122
123;--------------------------------------------------------------------
124; Memory_ReserveCXbytesFromStackToDSSI
125; Parameters
126; CX: Number of bytes to reserve
127; Returns:
128; DS:SI: Ptr to reserved buffer
129; Corrupts registers:
130; AX
131;--------------------------------------------------------------------
132%ifndef EXCLUDE_FROM_XUB
133ALIGN JUMP_ALIGN
134Memory_ReserveCXbytesFromStackToDSSI:
135 pop ax
136 push ss
137 pop ds
138 sub sp, cx
139 mov si, sp
140 jmp ax
141%endif
142
143
144;--------------------------------------------------------------------
145; Memory_SumCXbytesFromESSItoAL
146; Parameters
147; CX: Number of bytes to sum (0=65536)
148; ES:SI: Ptr to buffer containing the bytes to sum
149; Returns:
150; AL: Sum of bytes
151; ZF: Set if result is zero
152; Cleared if result is non-zero
153; Corrupts registers:
154; CX
155;--------------------------------------------------------------------
156%ifndef EXCLUDE_FROM_XTIDECFG OR NO_ATAID_VALIDATION
157ALIGN JUMP_ALIGN
158Memory_SumCXbytesFromESSItoAL:
159 push si
160 dec si
161 xor al, al
162ALIGN JUMP_ALIGN
163.AddNextByteToAL:
164 inc si
165 add al, [es:si]
166 loop .AddNextByteToAL
167 pop si
168 ret
169%endif
Note: See TracBrowser for help on using the repository browser.