source: xtideuniversalbios/trunk/Assembly_Library/Src/Time/TimerTicks.asm@ 594

Last change on this file since 594 was 592, checked in by Krister Nordvall, 6 years ago

Changes:

  • The problem with NASM in the previous revision (r591) has been fixed.
  • The colors used by the boot menu and hotkey bar can now be customized by selecting one of a number of pre-defined color themes. Suggestions for additional themes are more than welcome!
  • Large builds are now 10 KB. Small builds are still 8 KB with the exception of the Tiny build which is now 4 KB. In other words, builds are now as small as possible to make it easier to combine them with other BIOSes.
  • Added code to the library to improve drive error handling. XTIDECFG can now handle "Drive Not Ready" errors.
  • Fixed a couple of potential bugs in AtaID.asm (AtaID_GetMaxPioModeToAXandMinCycleTimeToCX); 1) ATA1.bPioMode was treated as a WORD variable. 2) ATA2.bPIOSupp was assumed to be non-zero which would result in PIO mode 3 being returned if the assumption was wrong.
  • Made the same changes in the equivalent function used by BIOSDRVS (DisplayPioModeInformationUsingAtaInfoFromDSBX in AtaInfo.asm).
  • Fixed a bug from r587 in PDC20x30.asm in PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX.
  • Fixed a bug from r523 in XTIDECFG where Auto Configure would only set the IRQ on one IDE interface on AT-builds.
  • XTIDECFG will now restore the default settings for the "Serial port virtual device" when reselecting it in the list of device types. This makes it behave consistently for all device types.
  • The eAAM macro is now used regardless if USE_UNDOC_INTEL is defined or not because it is apparently supported on all processors including the NEC V20/V30 CPUs.
  • Renamed the EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS define to EXCLUDE_FROM_XUB.
  • Added a define to exclude unused library code from BIOSDRVS (EXCLUDE_FROM_BIOSDRVS). This makes it a lot smaller than in previous revisions.
  • All unnecessary CLD-instructions are now under a new define 'CLD_NEEDED' which is only enabled for the BIOS. It is disabled for XTIDECFG and BIOSDRVS but can be enabled if needed by adding this define to the respective makefile. This change was made because these unnecessary instructions are wasteful and should never be needed. In fact, they only serve to hide bugs (in other peoples code) which I strongly believe should be avoided. I recommend people making their own BIOSes from source to not use this define as it's extremely unlikely to be needed.
  • Updated the copyright info in SerDrive and changed an URL to point to the new site.
  • Updated the copyright info and version number in BIOSDRVS.
  • Updated the copyright info in XTIDECFG.
  • Optimizations in general.
File size: 6.4 KB
Line 
1; Project name : Assembly Library
2; Description : Functions for system timer related operations.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; With a PIT input clock of 1193181.6666... Hz and a maximum
21; 16 bit divisor of 65536 (if PIT programmed with 0) we get:
22;
23; Clock / Divisor = ~18.2065 ticks per second
24; Clock * SecondsPerMinute / Divisor = ~1092 ticks per minute
25; Clock * SecondsPerHour / Divisor = ~65543 ticks per hour
26;
27; Since 65543 can't fit in a 16 bit register we use the
28; maximum possible instead and disregard the last ~8 ticks.
29
30TICKS_PER_HOUR EQU 65535
31TICKS_PER_MINUTE EQU 1092
32TICKS_PER_SECOND EQU 18
33
34
35; Section containing code
36SECTION .text
37
38;--------------------------------------------------------------------
39; TimerTicks_GetHoursToAXandRemainderTicksToDXfromTicksInDXAX
40; TimerTicks_GetMinutesToAXandRemainderTicksToDXfromTicksInDX
41; TimerTicks_GetSecondsToAXandRemainderTicksToDXfromTicksInDX
42; Parameters
43; DX(:AX): Timer ticks to convert
44; Returns:
45; AX: Hours, minutes or seconds
46; DX: Remainder ticks
47; Corrupts registers:
48; CX
49;--------------------------------------------------------------------
50%ifndef EXCLUDE_FROM_XUB
51%ifndef EXCLUDE_FROM_XTIDECFG
52ALIGN JUMP_ALIGN
53TimerTicks_GetHoursToAXandRemainderTicksToDXfromTicksInDXAX:
54 mov cx, TICKS_PER_HOUR
55 div cx ; Divide DX:AX by CX, Hours to AX, remainder ticks to DX
56 ret
57%endif ; EXCLUDE_FROM_XTIDECFG
58
59ALIGN JUMP_ALIGN
60TimerTicks_GetMinutesToAXandRemainderTicksToDXfromTicksInDX:
61 xor ax, ax
62 xchg ax, dx ; Ticks now in DX:AX
63 mov cx, TICKS_PER_MINUTE
64 div cx ; Divide DX:AX by CX, Minutes to AX, remainder ticks to DX
65 ret
66%endif ; EXCLUDE_FROM_XUB
67
68%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
69ALIGN JUMP_ALIGN
70TimerTicks_GetSecondsToAXandRemainderTicksToDXfromTicksInDX:
71 ; This procedure can handle at most 4607 ticks in DX (almost 256 seconds)
72 ; More than 4607 ticks will generate a divide overflow exception!
73 xchg ax, dx ; Ticks now in AX
74 mov cl, TICKS_PER_SECOND
75 div cl ; Divide AX by CL, Seconds to AL, remainder ticks to AH
76 xor dx, dx
77 xchg dl, ah ; Seconds in AX, remainder in DX
78 ret
79%endif
80
81
82%ifdef EXCLUDE_FROM_XUB
83 %ifndef MODULE_BOOT_MENU
84 %define EXCLUDE
85 %endif
86%endif
87;--------------------------------------------------------------------
88; TimerTicks_GetSecondsToAXfromTicksInDX
89; Parameters
90; DX: Timer ticks to convert
91; Returns:
92; AX: Seconds
93; Corrupts registers:
94; DX
95;--------------------------------------------------------------------
96%ifndef EXCLUDE ; 1 of 3
97ALIGN JUMP_ALIGN
98TimerTicks_GetSecondsToAXfromTicksInDX:
99 mov ax, 3600 ; Approximately 65536 / (Clock / Divisor)
100 mul dx
101 xchg dx, ax
102 ret
103%endif
104
105
106;--------------------------------------------------------------------
107; First tick might take 0...54.9 ms and remaining ticks
108; will occur at 54.9 ms intervals. Use delay of two (or more) ticks to
109; ensure at least 54.9 ms timeout.
110;
111; TimerTicks_InitializeTimeoutFromAX
112; Parameters:
113; AX: Timeout ticks (54.9 ms) before timeout
114; DS:BX: Ptr to timeout variable WORD
115; Returns:
116; [DS:BX]: Initialized for TimerTicks_SetCarryIfTimeoutFromDSBX
117; Corrupts registers:
118; AX
119;--------------------------------------------------------------------
120%ifndef EXCLUDE ; 2 of 3
121ALIGN JUMP_ALIGN
122TimerTicks_InitializeTimeoutFromAX:
123 mov [bx], ax ; Store timeout ticks
124 call TimerTicks_ReadFromBdaToAX
125 add [bx], ax ; [bx] now contains end time for timeout
126 ret
127%endif
128
129
130;--------------------------------------------------------------------
131; TimerTicks_GetTimeoutTicksLeftToAXfromDSBX
132; Parameters:
133; DS:BX: Ptr to timeout variable WORD
134; Returns:
135; AX: Number of ticks left before timeout
136; CF: Set if timeout
137; Cleared if time left
138; Corrupts registers:
139; Nothing
140;--------------------------------------------------------------------
141%ifndef EXCLUDE ; 3 of 3
142ALIGN JUMP_ALIGN
143TimerTicks_GetTimeoutTicksLeftToAXfromDSBX:
144 push dx
145 mov dx, [bx]
146 call TimerTicks_ReadFromBdaToAX
147 xchg ax, dx
148 sub ax, dx ; AX = End time - current time
149 pop dx
150 ret
151%endif
152
153%undef EXCLUDE
154
155
156;--------------------------------------------------------------------
157; TimerTicks_GetElapsedToAXandResetDSBX
158; Parameters
159; DS:BX: Ptr to WORD containing previous reset time
160; Returns:
161; AX: 54.9 ms ticks elapsed since last reset
162; [DS:BX]: Reset to latest time
163; Corrupts registers:
164; Nothing
165;--------------------------------------------------------------------
166%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
167ALIGN JUMP_ALIGN
168TimerTicks_GetElapsedToAXandResetDSBX:
169 call TimerTicks_ReadFromBdaToAX
170 push ax
171 sub ax, [bx]
172 pop WORD [bx] ; Latest time to [DS:BX]
173 ret
174%endif
175
176
177;--------------------------------------------------------------------
178; TimerTicks_GetElapsedToAXfromDSBX
179; Parameters
180; DS:BX: Ptr to WORD containing previous update time
181; Returns:
182; AX: 54.9 ms ticks elapsed since initializing [DS:BX]
183; Corrupts registers:
184; Nothing
185;--------------------------------------------------------------------
186%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
187ALIGN JUMP_ALIGN
188TimerTicks_GetElapsedToAXfromDSBX:
189 call TimerTicks_ReadFromBdaToAX
190 sub ax, [bx]
191 ret
192%endif
193
194
195;--------------------------------------------------------------------
196; TimerTicks_ReadFromBdaToAX
197; Parameters
198; Nothing
199; Returns:
200; AX: System time in 54.9 ms ticks
201; Corrupts registers:
202; Nothing
203;--------------------------------------------------------------------
204%ifdef EXCLUDE_FROM_XUB
205 %ifndef MODULE_BOOT_MENU OR MODULE_HOTKEYS
206 %define EXCLUDE
207 %endif
208%endif
209
210%ifndef EXCLUDE
211ALIGN JUMP_ALIGN
212TimerTicks_ReadFromBdaToAX:
213 push ds
214
215 LOAD_BDA_SEGMENT_TO ds, ax
216 mov ax, [BDA.dwTimerTicks] ; Read low WORD only
217
218 pop ds
219 ret
220%endif
221%undef EXCLUDE
Note: See TracBrowser for help on using the repository browser.