source: xtideuniversalbios/trunk/Assembly_Library/Src/Keyboard/Keyboard.asm@ 598

Last change on this file since 598 was 592, checked in by Krister Nordvall, 6 years ago

Changes:

  • The problem with NASM in the previous revision (r591) has been fixed.
  • The colors used by the boot menu and hotkey bar can now be customized by selecting one of a number of pre-defined color themes. Suggestions for additional themes are more than welcome!
  • Large builds are now 10 KB. Small builds are still 8 KB with the exception of the Tiny build which is now 4 KB. In other words, builds are now as small as possible to make it easier to combine them with other BIOSes.
  • Added code to the library to improve drive error handling. XTIDECFG can now handle "Drive Not Ready" errors.
  • Fixed a couple of potential bugs in AtaID.asm (AtaID_GetMaxPioModeToAXandMinCycleTimeToCX); 1) ATA1.bPioMode was treated as a WORD variable. 2) ATA2.bPIOSupp was assumed to be non-zero which would result in PIO mode 3 being returned if the assumption was wrong.
  • Made the same changes in the equivalent function used by BIOSDRVS (DisplayPioModeInformationUsingAtaInfoFromDSBX in AtaInfo.asm).
  • Fixed a bug from r587 in PDC20x30.asm in PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX.
  • Fixed a bug from r523 in XTIDECFG where Auto Configure would only set the IRQ on one IDE interface on AT-builds.
  • XTIDECFG will now restore the default settings for the "Serial port virtual device" when reselecting it in the list of device types. This makes it behave consistently for all device types.
  • The eAAM macro is now used regardless if USE_UNDOC_INTEL is defined or not because it is apparently supported on all processors including the NEC V20/V30 CPUs.
  • Renamed the EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS define to EXCLUDE_FROM_XUB.
  • Added a define to exclude unused library code from BIOSDRVS (EXCLUDE_FROM_BIOSDRVS). This makes it a lot smaller than in previous revisions.
  • All unnecessary CLD-instructions are now under a new define 'CLD_NEEDED' which is only enabled for the BIOS. It is disabled for XTIDECFG and BIOSDRVS but can be enabled if needed by adding this define to the respective makefile. This change was made because these unnecessary instructions are wasteful and should never be needed. In fact, they only serve to hide bugs (in other peoples code) which I strongly believe should be avoided. I recommend people making their own BIOSes from source to not use this define as it's extremely unlikely to be needed.
  • Updated the copyright info in SerDrive and changed an URL to point to the new site.
  • Updated the copyright info and version number in BIOSDRVS.
  • Updated the copyright info in XTIDECFG.
  • Optimizations in general.
File size: 9.3 KB
Line 
1; Project name : Assembly Library
2; Description : Functions for managing keyboard.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20
21BUFFER_SIZE_FOR_WORD_INPUT EQU 6 ; 5 chars + NULL
22
23; Section containing code
24SECTION .text
25
26;--------------------------------------------------------------------
27; Reads user inputted word.
28; Function returns when ENTER or ESC will be pressed.
29;
30; Keyboard_ReadUserInputtedWordWhilePrinting
31; Parameters
32; BX: Numeric base (10 or 16)
33; Returns:
34; AX: User inputted word
35; ZF: Set if user cancellation
36; Corrupts registers:
37; DX
38;--------------------------------------------------------------------
39%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
40ALIGN KEYBOARD_JUMP_ALIGN
41Keyboard_ReadUserInputtedWordWhilePrinting:
42 push ds
43 push si
44 push cx
45
46 mov cx, BUFFER_SIZE_FOR_WORD_INPUT
47 call Memory_ReserveCXbytesFromStackToDSSI
48
49 call Char_GetFilterFunctionToDXforNumericBaseInBX
50 call Registers_ExchangeDSSIwithESDI
51 call Keyboard_ReadUserInputtedStringToESDIWhilePrinting
52 call Registers_ExchangeDSSIwithESDI ; Does not modify FLAGS
53 jz SHORT .CancelledByUser
54
55 call String_ConvertWordToAXfromStringInDSSIwithBaseInBX
56.CancelledByUser:
57 add sp, BYTE BUFFER_SIZE_FOR_WORD_INPUT
58 test cx, cx ; Set ZF if string length is zero
59 pop cx
60 pop si
61 pop ds
62 ret
63%endif
64
65
66;--------------------------------------------------------------------
67; Reads user inputted string to buffer. Character filter is
68; supported to ignore unwanted characters.
69; Function returns when ENTER or ESC will be pressed.
70;
71; Keyboard_ReadUserInputtedStringToESDIWhilePrinting
72; Parameters:
73; CX: Buffer size (with NULL)
74; ES:DI: Ptr to destination buffer
75; CS:DX: Ptr to character filter function:
76; Parameters:
77; AL: Character inputted by user
78; Returns:
79; CF: Set if character is accepted
80; Cleared if character is rejected
81; Corrupts registers:
82; Nothing
83; Returns:
84; CX: String length in characters (without NULL)
85; ZF: Set if user cancellation
86; Corrupts registers:
87; AX
88;--------------------------------------------------------------------
89%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
90ALIGN KEYBOARD_JUMP_ALIGN
91Keyboard_ReadUserInputtedStringToESDIWhilePrinting:
92 push di
93 push si
94 push bx
95 call .PrepareDisplayContextForKeyboardInput
96 jcxz .ReturnAfterUpdatingZF
97
98 xor bx, bx ; Zero character counter
99 dec cx ; Decrement buffer size for NULL
100%ifdef CLD_NEEDED
101 cld
102%endif
103ALIGN KEYBOARD_JUMP_ALIGN
104.GetCharacterFromUser:
105 call Keyboard_GetKeystrokeToAXandWaitIfNecessary ; Get ASCII to AL
106 call .ProcessControlCharacter
107 jz SHORT .TerminateStringWithNULL
108 jc SHORT .PlayBellForRejectedCharacter
109 call dx ; Filter character
110 jnc SHORT .PlayBellForRejectedCharacter
111 inc bx ; Increment number of characters stored
112 stosb ; Store from AL to ES:DI
113 call Keyboard_PrintInputtedCharacter
114 loop .GetCharacterFromUser
115.PlayBellForRejectedCharacter:
116 cmp al, BS ; No bell for backspace
117 je SHORT .GetCharacterFromUser
118 call Keyboard_PlayBellForUnwantedKeystroke
119 jmp SHORT .GetCharacterFromUser
120
121.TerminateStringWithNULL:
122 stosb ; Terminate string with NULL
123 mov cx, bx ; String length now in CX
124
125.ReturnAfterUpdatingZF:
126 CALL_DISPLAY_LIBRARY PopDisplayContext
127 test cx, cx ; Clear or set ZF
128 pop bx
129 pop si
130 pop di
131 ret
132
133;--------------------------------------------------------------------
134; .PrepareDisplayContextForKeyboardInput
135; Parameters:
136; Nothing
137; Returns:
138; Nothing (Display context pushed to stack)
139; Corrupts registers:
140; AX, BX, SI
141;--------------------------------------------------------------------
142ALIGN KEYBOARD_JUMP_ALIGN
143.PrepareDisplayContextForKeyboardInput:
144 pop bx ; Pop return address to BX
145 mov si, di
146
147 CALL_DISPLAY_LIBRARY PushDisplayContext
148 call DisplayCursor_GetDefaultCursorShapeToAX
149 CALL_DISPLAY_LIBRARY SetCursorShapeFromAX
150 CALL_DISPLAY_LIBRARY SynchronizeDisplayContextToHardware
151
152 mov di, si
153 jmp bx
154
155
156;--------------------------------------------------------------------
157; .ProcessControlCharacter
158; Parameters:
159; AL: Character inputted by user
160; CX: Number of bytes left in buffer
161; BX: Total number of characters inputted
162; ES:DI: Ptr where to store next character
163; Returns:
164; AL: Character inputted by user or NULL if end of input
165; BX: Cleared if user cancellation
166; ZF: Set if user has ended or cancelled key input
167; CF: Set if character is rejected
168; Corrupts registers:
169; AH
170;--------------------------------------------------------------------
171ALIGN KEYBOARD_JUMP_ALIGN
172.ProcessControlCharacter:
173 cmp al, CR ; ENTER to terminate string?
174 je SHORT .EndCharacterInput
175 cmp al, ESC ; Cancel input?
176 je SHORT .CancelCharacterInput
177 cmp al, BS ; Backspace?
178 je SHORT .Backspace
179 jcxz .RejectCharacter
180 clc ; Clear CF (ZF is already cleared)
181 ret
182
183.Backspace:
184 test bx, bx ; At the beginning?
185 jz SHORT .RejectCharacter
186 inc cx ; Increment bytes left
187 dec bx ; Decrement characters inputted
188 dec di
189 call Keyboard_PrintBackspace
190 mov al, BS ; Restore character
191.RejectCharacter:
192 test al, al ; Clear ZF...
193 stc ; ...and set CF
194 ret
195
196.CancelCharacterInput:
197 xor bx, bx
198.EndCharacterInput:
199 xor al, al ; Set ZF and clear CF
200 ret
201%endif ; EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
202
203
204;--------------------------------------------------------------------
205; Keyboard_PrintBackspace
206; Parameters:
207; Nothing
208; Returns:
209; Nothing
210; Corrupts registers:
211; AX
212;--------------------------------------------------------------------
213%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
214ALIGN KEYBOARD_JUMP_ALIGN
215Keyboard_PrintBackspace:
216 mov al, BS
217 call Keyboard_PrintInputtedCharacter
218 mov al, ' '
219 call Keyboard_PrintInputtedCharacter
220 mov al, BS
221 jmp SHORT Keyboard_PrintInputtedCharacter
222%endif
223
224
225;--------------------------------------------------------------------
226; Keyboard_PlayBellForUnwantedKeystroke
227; Parameters:
228; Nothing
229; Returns:
230; Nothing
231; Corrupts registers:
232; AX
233;--------------------------------------------------------------------
234%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
235ALIGN KEYBOARD_JUMP_ALIGN
236Keyboard_PlayBellForUnwantedKeystroke:
237 mov al, BELL
238 ; Fall to Keyboard_PrintInputtedCharacter
239%endif
240
241;--------------------------------------------------------------------
242; Keyboard_PrintInputtedCharacter
243; Parameters:
244; AL: Character inputted by user
245; Returns:
246; Nothing
247; Corrupts registers:
248; AX
249;--------------------------------------------------------------------
250%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
251ALIGN KEYBOARD_JUMP_ALIGN
252Keyboard_PrintInputtedCharacter:
253 push di
254 CALL_DISPLAY_LIBRARY PrintCharacterFromAL
255 CALL_DISPLAY_LIBRARY SynchronizeDisplayContextToHardware ; Hardware cursor
256 pop di
257 ret
258%endif
259
260
261;--------------------------------------------------------------------
262; Keyboard_RemoveAllKeystrokesFromBuffer
263; Parameters:
264; Nothing
265; Returns:
266; Nothing
267; Corrupts registers:
268; AX
269;--------------------------------------------------------------------
270%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS ; Only used when debugging
271ALIGN KEYBOARD_JUMP_ALIGN
272Keyboard_RemoveAllKeystrokesFromBuffer:
273 call Keyboard_GetKeystrokeToAX
274 jnz SHORT Keyboard_RemoveAllKeystrokesFromBuffer
275 ret
276%endif
277
278
279;--------------------------------------------------------------------
280; Keyboard_GetKeystrokeToAX
281; Keyboard_GetKeystrokeToAXandLeaveItToBuffer
282; Keyboard_GetKeystrokeToAXandWaitIfNecessary
283; Parameters:
284; Nothing
285; Returns:
286; AL: ASCII character (if keystroke available)
287; AH: BIOS scan code (if keystroke available)
288; ZF: Set if no keystroke available
289; Cleared if keystroke available
290; Corrupts registers:
291; Nothing
292;--------------------------------------------------------------------
293%ifdef EXCLUDE_FROM_XUB
294 %define EXCLUDE
295 %ifdef MODULE_HOTKEYS OR MODULE_BOOT_MENU
296 %undef EXCLUDE
297 %endif
298%endif
299
300%ifndef EXCLUDE
301ALIGN KEYBOARD_JUMP_ALIGN
302Keyboard_GetKeystrokeToAXandLeaveItToBuffer:
303 mov ah, CHECK_FOR_KEYSTROKE
304 int BIOS_KEYBOARD_INTERRUPT_16h
305 ret
306
307ALIGN KEYBOARD_JUMP_ALIGN
308Keyboard_GetKeystrokeToAX:
309 call Keyboard_GetKeystrokeToAXandLeaveItToBuffer
310 jz SHORT Keyboard_GetKeystrokeToAXReturn
311 ; Fall to Keyboard_GetKeystrokeToAXandWaitIfNecessary
312ALIGN KEYBOARD_JUMP_ALIGN
313Keyboard_GetKeystrokeToAXandWaitIfNecessary:
314 xor ah, ah ; GET_KEYSTROKE
315 int BIOS_KEYBOARD_INTERRUPT_16h
316 test ax, ax ; Clear ZF
317Keyboard_GetKeystrokeToAXReturn:
318 ret
319
320%endif
321%undef EXCLUDE
Note: See TracBrowser for help on using the repository browser.