source: xtideuniversalbios/trunk/Assembly_Library/Inc/NEC_V.inc@ 614

Last change on this file since 614 was 593, checked in by Tomi Tilli, 6 years ago

Flashing now works again.
Hack to get Windows 95 to work properly (MODULE_WIN95_CMOS_HACK included for 386 builds by default).
Edited makefile to produce large 386 build.
Fixed recovery time for QDI Vision VLB-IDE controllers.
No more warnings with Nasm 2.13.xx and later.
File dialog now properly restores default drive when file selection is cancelled.
File size: 24.5 KB
RevLine 
[593]1; Project name : Assembly Library
2; Description : Macros for using NEC V20/V30 specific instructions.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20%ifndef NEC_V_INC
21%define NEC_V_INC
22
23 regAL equ 000b
24 regCL equ 001b
25 regDL equ 010b
26 regBL equ 011b
27 regAH equ 100b
28 regCH equ 101b
29 regDH equ 110b
30 regBH equ 111b
31
32 regAX equ regAL
33 regCX equ regCL
34 regDX equ regDL
35 regBX equ regBL
36 regSP equ regAH
37 regBP equ regCH
38 regSI equ regDH
39 regDI equ regBH
40
41
42;--------------------------------------------------------------------
43; The REPC string instruction prefix available on NEC V20/V30 CPUs.
44;
45; Repeats the following string instruction (CMPS or SCAS)
46; while CF=1 and CX<>0.
47;
48; eREPC
49; Parameters:
50; %1: String instruction (optional for this macro)
51; CX: String length in BYTEs or WORDs
52; xS:SI: Pointer to source string. Default segment is DS but can be overridden
53; ES:DI: Pointer to destination string
54; Returns:
55; CF/CX: Depends on the result from the string instruction.
56; If CF clear, then CX contains the remaining number of
57; BYTEs or WORDs in the string. If CF set, then CX=0.
58; SI/DI: Updated depending on the string instruction used and
59; state of the direction flag.
60; Corrupts registers:
61; The string instruction corrupts FLAGS. The prefix corrupts nothing.
62;--------------------------------------------------------------------
63%macro eREPC 0-1.nolist
64 db 65h
65 %ifnempty %1
66 %1
67 %endif
68%endmacro
69
70
71;--------------------------------------------------------------------
72; The REPNC string instruction prefix available on NEC V20/V30 CPUs.
73;
74; Repeats the following string instruction (CMPS or SCAS)
75; while CF=0 and CX<>0.
76;
77; eREPNC
78; Parameters:
79; %1: String instruction (optional for this macro)
80; CX: String length in BYTEs or WORDs
81; xS:SI: Pointer to source string. Default segment is DS but can be overridden
82; ES:DI: Pointer to destination string
83; Returns:
84; CF/CX: Depends on the result from the string instruction.
85; If CF set, then CX contains the remaining number of
86; BYTEs or WORDs in the string. If CF clear, then CX=0.
87; SI/DI: Updated depending on the string instruction used and
88; state of the direction flag.
89; Corrupts registers:
90; The string instruction corrupts FLAGS. The prefix corrupts nothing.
91;--------------------------------------------------------------------
92%macro eREPNC 0-1.nolist
93 db 64h
94 %ifnempty %1
95 %1
96 %endif
97%endmacro
98
99
100;--------------------------------------------------------------------
101; The CLR1 instruction available on NEC V20/V30 CPUs.
102;
103; Clears bit indexed by Source in Destination.
104;
105; eCLR1
106; Parameters:
107; %1: Destination (register or memory location)
108; %2: Source (CL or immediate value)
109; Returns:
110; Nothing
111; Corrupts registers:
112; Nothing (not even FLAGS)
113;--------------------------------------------------------------------
114%macro eCLR1 2.nolist
115 %assign w 0
116 %assign i 0
117 %ifnidni %2, cl
118 %assign i (1 << 3)
119 %endif
120 FSIS ], %1
121 %if strpos
122 FSIS BYTE, %1
123 %ifn strpos = 1
124 FSIS WORD, %1
125 %if strpos = 1
126 %assign w 1
127 %elif i
128 %if %2 > 7
129 %assign w 1
130 %endif
131 %else
132 %error "Memory operand needs a size specifier!"
133 %endif
134 %endif
135 %assign m (00b << 6)
136 FSIS [bx+si], %1
137 %if strpos
138 %assign rm 000b
139 %else
140 FSIS [bx+di], %1
141 %if strpos
142 %assign rm 001b
143 %else
144 FSIS [bp+si], %1
145 %if strpos
146 %assign rm 010b
147 %else
148 FSIS [bp+di], %1
149 %if strpos
150 %assign rm 011b
151 %else
152 FSIS [si], %1
153 %if strpos
154 %assign rm 100b
155 %else
156 FSIS [di], %1
157 %if strpos
158 %assign rm 101b
159 %else
160 FSIS [bx], %1
161 %if strpos
162 %assign rm 111b
163 %else
164 %error "Memory operands are not (yet) fully supported by the eCLR1 macro!"
165 %endif
166 %endif
167 %endif
168 %endif
169 %endif
170 %endif
171 %endif
172 %else
173 %assign m (11b << 6)
174 %ifidni %1, ax
175 %assign w 1
176 %assign rm regAX
177 %elifidni %1, bx
178 %assign w 1
179 %assign rm regBX
180 %elifidni %1, cx
181 %assign w 1
182 %assign rm regCX
183 %elifidni %1, dx
184 %assign w 1
185 %assign rm regDX
186 %elifidni %1, bp
187 %assign w 1
188 %assign rm regBP
189 %elifidni %1, sp
190 %assign w 1
191 %assign rm regSP
192 %elifidni %1, si
193 %assign w 1
194 %assign rm regSI
195 %elifidni %1, di
196 %assign w 1
197 %assign rm regDI
198 %elifidni %1, al
199 %assign rm regAL
200 %elifidni %1, ah
201 %assign rm regAH
202 %elifidni %1, bl
203 %assign rm regBL
204 %elifidni %1, bh
205 %assign rm regBH
206 %elifidni %1, cl
207 %assign rm regCL
208 %elifidni %1, ch
209 %assign rm regCH
210 %elifidni %1, dl
211 %assign rm regDL
212 %elifidni %1, dh
213 %assign rm regDH
214 %else
215 %error Invalid parameter passed to eCLR1! (%1)
216 %endif
217 %endif
218 db 0Fh, 12h | i | w, m | rm
219 %if i
220 db %2
221 %if w
222 %if %2 > 15
223 %warning Possibly invalid parameter passed to eCLR1! (%2 > 15)
224 %endif
225 %else
226 %if %2 > 7
227 %warning Possibly invalid parameter passed to eCLR1! (%2 > 7)
228 %endif
229 %endif
230 %endif
231%endmacro
232
233
234;--------------------------------------------------------------------
235; The SET1 instruction available on NEC V20/V30 CPUs.
236;
237; Sets bit indexed by Source in Destination.
238;
239; eSET1
240; Parameters:
241; %1: Destination (register or memory location)
242; %2: Source (CL or immediate value)
243; Returns:
244; Nothing
245; Corrupts registers:
246; Nothing (not even FLAGS)
247;--------------------------------------------------------------------
248%macro eSET1 2.nolist
249 %assign w 0
250 %assign i 0
251 %ifnidni %2, cl
252 %assign i (1 << 3)
253 %endif
254 FSIS ], %1
255 %if strpos
256 FSIS BYTE, %1
257 %ifn strpos = 1
258 FSIS WORD, %1
259 %if strpos = 1
260 %assign w 1
261 %elif i
262 %if %2 > 7
263 %assign w 1
264 %endif
265 %else
266 %error "Memory operand needs a size specifier!"
267 %endif
268 %endif
269 %assign m (00b << 6)
270 FSIS [bx+si], %1
271 %if strpos
272 %assign rm 000b
273 %else
274 FSIS [bx+di], %1
275 %if strpos
276 %assign rm 001b
277 %else
278 FSIS [bp+si], %1
279 %if strpos
280 %assign rm 010b
281 %else
282 FSIS [bp+di], %1
283 %if strpos
284 %assign rm 011b
285 %else
286 FSIS [si], %1
287 %if strpos
288 %assign rm 100b
289 %else
290 FSIS [di], %1
291 %if strpos
292 %assign rm 101b
293 %else
294 FSIS [bx], %1
295 %if strpos
296 %assign rm 111b
297 %else
298 %error "Memory operands are not (yet) fully supported by the eSET1 macro!"
299 %endif
300 %endif
301 %endif
302 %endif
303 %endif
304 %endif
305 %endif
306 %else
307 %assign m (11b << 6)
308 %ifidni %1, ax
309 %assign w 1
310 %assign rm regAX
311 %elifidni %1, bx
312 %assign w 1
313 %assign rm regBX
314 %elifidni %1, cx
315 %assign w 1
316 %assign rm regCX
317 %elifidni %1, dx
318 %assign w 1
319 %assign rm regDX
320 %elifidni %1, bp
321 %assign w 1
322 %assign rm regBP
323 %elifidni %1, sp
324 %assign w 1
325 %assign rm regSP
326 %elifidni %1, si
327 %assign w 1
328 %assign rm regSI
329 %elifidni %1, di
330 %assign w 1
331 %assign rm regDI
332 %elifidni %1, al
333 %assign rm regAL
334 %elifidni %1, ah
335 %assign rm regAH
336 %elifidni %1, bl
337 %assign rm regBL
338 %elifidni %1, bh
339 %assign rm regBH
340 %elifidni %1, cl
341 %assign rm regCL
342 %elifidni %1, ch
343 %assign rm regCH
344 %elifidni %1, dl
345 %assign rm regDL
346 %elifidni %1, dh
347 %assign rm regDH
348 %else
349 %error Invalid parameter passed to eSET1! (%1)
350 %endif
351 %endif
352 db 0Fh, 14h | i | w, m | rm
353 %if i
354 db %2
355 %if w
356 %if %2 > 15
357 %warning Possibly invalid parameter passed to eSET1! (%2 > 15)
358 %endif
359 %else
360 %if %2 > 7
361 %warning Possibly invalid parameter passed to eSET1! (%2 > 7)
362 %endif
363 %endif
364 %endif
365%endmacro
366
367
368;--------------------------------------------------------------------
369; The NOT1 instruction available on NEC V20/V30 CPUs.
370;
371; Inverts bit indexed by Source in Destination.
372;
373; eNOT1
374; Parameters:
375; %1: Destination (register or memory location)
376; %2: Source (CL or immediate value)
377; Returns:
378; Nothing
379; Corrupts registers:
380; Nothing (not even FLAGS)
381;--------------------------------------------------------------------
382%macro eNOT1 2.nolist
383 %assign w 0
384 %assign i 0
385 %ifnidni %2, cl
386 %assign i (1 << 3)
387 %endif
388 FSIS ], %1
389 %if strpos
390 FSIS BYTE, %1
391 %ifn strpos = 1
392 FSIS WORD, %1
393 %if strpos = 1
394 %assign w 1
395 %elif i
396 %if %2 > 7
397 %assign w 1
398 %endif
399 %else
400 %error "Memory operand needs a size specifier!"
401 %endif
402 %endif
403 %assign m (00b << 6)
404 FSIS [bx+si], %1
405 %if strpos
406 %assign rm 000b
407 %else
408 FSIS [bx+di], %1
409 %if strpos
410 %assign rm 001b
411 %else
412 FSIS [bp+si], %1
413 %if strpos
414 %assign rm 010b
415 %else
416 FSIS [bp+di], %1
417 %if strpos
418 %assign rm 011b
419 %else
420 FSIS [si], %1
421 %if strpos
422 %assign rm 100b
423 %else
424 FSIS [di], %1
425 %if strpos
426 %assign rm 101b
427 %else
428 FSIS [bx], %1
429 %if strpos
430 %assign rm 111b
431 %else
432 %error "Memory operands are not (yet) fully supported by the eNOT1 macro!"
433 %endif
434 %endif
435 %endif
436 %endif
437 %endif
438 %endif
439 %endif
440 %else
441 %assign m (11b << 6)
442 %ifidni %1, ax
443 %assign w 1
444 %assign rm regAX
445 %elifidni %1, bx
446 %assign w 1
447 %assign rm regBX
448 %elifidni %1, cx
449 %assign w 1
450 %assign rm regCX
451 %elifidni %1, dx
452 %assign w 1
453 %assign rm regDX
454 %elifidni %1, bp
455 %assign w 1
456 %assign rm regBP
457 %elifidni %1, sp
458 %assign w 1
459 %assign rm regSP
460 %elifidni %1, si
461 %assign w 1
462 %assign rm regSI
463 %elifidni %1, di
464 %assign w 1
465 %assign rm regDI
466 %elifidni %1, al
467 %assign rm regAL
468 %elifidni %1, ah
469 %assign rm regAH
470 %elifidni %1, bl
471 %assign rm regBL
472 %elifidni %1, bh
473 %assign rm regBH
474 %elifidni %1, cl
475 %assign rm regCL
476 %elifidni %1, ch
477 %assign rm regCH
478 %elifidni %1, dl
479 %assign rm regDL
480 %elifidni %1, dh
481 %assign rm regDH
482 %else
483 %error Invalid parameter passed to eNOT1! (%1)
484 %endif
485 %endif
486 db 0Fh, 16h | i | w, m | rm
487 %if i
488 db %2
489 %if w
490 %if %2 > 15
491 %warning Possibly invalid parameter passed to eNOT1! (%2 > 15)
492 %endif
493 %else
494 %if %2 > 7
495 %warning Possibly invalid parameter passed to eNOT1! (%2 > 7)
496 %endif
497 %endif
498 %endif
499%endmacro
500
501
502;--------------------------------------------------------------------
503; The TEST1 instruction available on NEC V20/V30 CPUs.
504;
505; Tests bit indexed by Source in Destination.
506;
507; eTEST1
508; Parameters:
509; %1: Destination (register or memory location)
510; %2: Source (CL or immediate value)
511; Returns:
512; ZF: Set if tested bit is zero
513; Cleared if tested bit is not zero
514; CF: Cleared
515; OF: Cleared
516; Corrupts registers:
517; All other FLAGS
518;--------------------------------------------------------------------
519%macro eTEST1 2.nolist
520 %assign w 0
521 %assign i 0
522 %ifnidni %2, cl
523 %assign i (1 << 3)
524 %endif
525 FSIS ], %1
526 %if strpos
527 FSIS BYTE, %1
528 %ifn strpos = 1
529 FSIS WORD, %1
530 %if strpos = 1
531 %assign w 1
532 %elif i
533 %if %2 > 7
534 %assign w 1
535 %endif
536 %else
537 %error "Memory operand needs a size specifier!"
538 %endif
539 %endif
540 %assign m (00b << 6)
541 FSIS [bx+si], %1
542 %if strpos
543 %assign rm 000b
544 %else
545 FSIS [bx+di], %1
546 %if strpos
547 %assign rm 001b
548 %else
549 FSIS [bp+si], %1
550 %if strpos
551 %assign rm 010b
552 %else
553 FSIS [bp+di], %1
554 %if strpos
555 %assign rm 011b
556 %else
557 FSIS [si], %1
558 %if strpos
559 %assign rm 100b
560 %else
561 FSIS [di], %1
562 %if strpos
563 %assign rm 101b
564 %else
565 FSIS [bx], %1
566 %if strpos
567 %assign rm 111b
568 %else
569 %error "Memory operands are not (yet) fully supported by the eTEST1 macro!"
570 %endif
571 %endif
572 %endif
573 %endif
574 %endif
575 %endif
576 %endif
577 %else
578 %assign m (11b << 6)
579 %ifidni %1, ax
580 %assign w 1
581 %assign rm regAX
582 %elifidni %1, bx
583 %assign w 1
584 %assign rm regBX
585 %elifidni %1, cx
586 %assign w 1
587 %assign rm regCX
588 %elifidni %1, dx
589 %assign w 1
590 %assign rm regDX
591 %elifidni %1, bp
592 %assign w 1
593 %assign rm regBP
594 %elifidni %1, sp
595 %assign w 1
596 %assign rm regSP
597 %elifidni %1, si
598 %assign w 1
599 %assign rm regSI
600 %elifidni %1, di
601 %assign w 1
602 %assign rm regDI
603 %elifidni %1, al
604 %assign rm regAL
605 %elifidni %1, ah
606 %assign rm regAH
607 %elifidni %1, bl
608 %assign rm regBL
609 %elifidni %1, bh
610 %assign rm regBH
611 %elifidni %1, cl
612 %assign rm regCL
613 %elifidni %1, ch
614 %assign rm regCH
615 %elifidni %1, dl
616 %assign rm regDL
617 %elifidni %1, dh
618 %assign rm regDH
619 %else
620 %error Invalid parameter passed to eTEST1! (%1)
621 %endif
622 %endif
623 db 0Fh, 10h | i | w, m | rm
624 %if i
625 db %2
626 %if w
627 %if %2 > 15
628 %warning Possibly invalid parameter passed to eTEST1! (%2 > 15)
629 %endif
630 %else
631 %if %2 > 7
632 %warning Possibly invalid parameter passed to eTEST1! (%2 > 7)
633 %endif
634 %endif
635 %endif
636%endmacro
637
638
639;--------------------------------------------------------------------
640; The EXT instruction available on NEC V20/V30 CPUs.
641;
642; Loads AX with a zero-extended bitfield, from [xS:SI] plus an additional
643; bit offset specified in Destination, with Source+1 number of bits.
644; Both Source and Destination must be at most 15.
645;
646; eEXT
647; Parameters:
648; xS:SI: Pointer to bitfield. Default segment is DS but can be overridden
649; %1: Destination (8-bit register)
650; %2: Source (8-bit register or immediate value)
651; Returns:
652; AX: Extracted bitfield
653; %1: (%1 + %2 + 1) MOD 16
654; SI: SI + 2 (but only if %1 wrapped around)
655; Corrupts registers:
656; FLAGS
657;--------------------------------------------------------------------
658%macro eEXT 2.nolist
659 %assign m (11b << 6)
660 %assign i 0
661 %assign r 0
662 %ifidni %2, al
663 %assign r (regAL << 3)
664 %elifidni %2, ah
665 %assign r (regAH << 3)
666 %elifidni %2, bl
667 %assign r (regBL << 3)
668 %elifidni %2, bh
669 %assign r (regBH << 3)
670 %elifidni %2, cl
671 %assign r (regCL << 3)
672 %elifidni %2, ch
673 %assign r (regCH << 3)
674 %elifidni %2, dl
675 %assign r (regDL << 3)
676 %elifidni %2, dh
677 %assign r (regDH << 3)
678 %else
679 %if %2 > 15
680 %error Invalid parameter passed to eEXT! (%2 > 15)
681 %endif
682 %assign i (1 << 3)
683 %endif
684 %ifidni %1, al
685 %assign rm regAL
686 %elifidni %1, ah
687 %assign rm regAH
688 %elifidni %1, bl
689 %assign rm regBL
690 %elifidni %1, bh
691 %assign rm regBH
692 %elifidni %1, cl
693 %assign rm regCL
694 %elifidni %1, ch
695 %assign rm regCH
696 %elifidni %1, dl
697 %assign rm regDL
698 %elifidni %1, dh
699 %assign rm regDH
700 %else
701 %error Invalid parameter passed to eEXT! (%1)
702 %endif
703 db 0Fh, 33h | i, m | r | rm
704 %if i
705 db %2
706 %endif
707%endmacro
708
709
710;--------------------------------------------------------------------
711; The INS instruction available on NEC V20/V30 CPUs.
712;
713; Stores the Source+1 least significant bits in AX to [xS:DI]
714; plus an additional bit offset specified in Destination.
715; Both Source and Destination must be at most 15.
716;
717; eINS
718; Parameters:
719; xS:DI: Pointer to bitfield. Default segment is ES but can be overridden
720; %1: Destination (8-bit register)
721; %2: Source (8-bit register or immediate value)
722; Returns:
723; %1: (%1 + %2 + 1) MOD 16
724; DI: DI + 2 (but only if %1 wrapped around)
725; Corrupts registers:
726; FLAGS
727;--------------------------------------------------------------------
728%macro eINS 2.nolist
729 %assign m (11b << 6)
730 %assign i 0
731 %assign r 0
732 %ifidni %2, al
733 %assign r (regAL << 3)
734 %elifidni %2, ah
735 %assign r (regAH << 3)
736 %elifidni %2, bl
737 %assign r (regBL << 3)
738 %elifidni %2, bh
739 %assign r (regBH << 3)
740 %elifidni %2, cl
741 %assign r (regCL << 3)
742 %elifidni %2, ch
743 %assign r (regCH << 3)
744 %elifidni %2, dl
745 %assign r (regDL << 3)
746 %elifidni %2, dh
747 %assign r (regDH << 3)
748 %else
749 %if %2 > 15
750 %error Invalid parameter passed to eINS! (%2 > 15)
751 %endif
752 %assign i (1 << 3)
753 %endif
754 %ifidni %1, al
755 %assign rm regAL
756 %elifidni %1, ah
757 %assign rm regAH
758 %elifidni %1, bl
759 %assign rm regBL
760 %elifidni %1, bh
761 %assign rm regBH
762 %elifidni %1, cl
763 %assign rm regCL
764 %elifidni %1, ch
765 %assign rm regCH
766 %elifidni %1, dl
767 %assign rm regDL
768 %elifidni %1, dh
769 %assign rm regDH
770 %else
771 %error Invalid parameter passed to eINS! (%1)
772 %endif
773 db 0Fh, 31h | i, m | r | rm
774 %if i
775 db %2
776 %endif
777%endmacro
778
779
780;--------------------------------------------------------------------
781; The ROL4 instruction available on NEC V20/V30 CPUs.
782;
783; Rotates the destination four bits to the left via the low nibble of AL.
784;
785; eROL4
786; Parameters:
787; %1: 8-bit destination (register or memory location)
788; Returns:
789; AL: The high nibble of %1 in the low nibble of AL
790; %1: The low nibble of %1 in the high nibble of %1
791; The low nibble of AL in the low nibble of %1
792; Corrupts registers:
793; Nothing (not even FLAGS)
794;--------------------------------------------------------------------
795%macro eROL4 1.nolist
796 FSIS ], %1
797 %if strpos
798 %assign m (00b << 6)
799 FSIS [bx+si], %1
800 %if strpos
801 %assign rm 000b
802 %else
803 FSIS [bx+di], %1
804 %if strpos
805 %assign rm 001b
806 %else
807 FSIS [bp+si], %1
808 %if strpos
809 %assign rm 010b
810 %else
811 FSIS [bp+di], %1
812 %if strpos
813 %assign rm 011b
814 %else
815 FSIS [si], %1
816 %if strpos
817 %assign rm 100b
818 %else
819 FSIS [di], %1
820 %if strpos
821 %assign rm 101b
822 %else
823 FSIS [bx], %1
824 %if strpos
825 %assign rm 111b
826 %else
827 %error "Memory operands are not (yet) fully supported by the eROL4 macro!"
828 %endif
829 %endif
830 %endif
831 %endif
832 %endif
833 %endif
834 %endif
835 %else
836 %assign m (11b << 6)
837 %ifidni %1, al
838 %assign rm regAL
839 %elifidni %1, ah
840 %assign rm regAH
841 %elifidni %1, bl
842 %assign rm regBL
843 %elifidni %1, bh
844 %assign rm regBH
845 %elifidni %1, cl
846 %assign rm regCL
847 %elifidni %1, ch
848 %assign rm regCH
849 %elifidni %1, dl
850 %assign rm regDL
851 %elifidni %1, dh
852 %assign rm regDH
853 %else
854 %error Invalid parameter passed to eROL4! (%1)
855 %endif
856 %endif
857 db 0Fh, 28h, m | rm
858%endmacro
859
860
861;--------------------------------------------------------------------
862; The ROR4 instruction available on NEC V20/V30 CPUs.
863;
864; Rotates the destination four bits to the right via the low nibble of AL.
865;
866; eROR4
867; Parameters:
868; %1: 8-bit destination (register or memory location)
869; Returns:
870; AL: The low nibble of %1 in the low nibble of AL
871; %1: The high nibble of %1 in the low nibble of %1
872; The low nibble of AL in the high nibble of %1
873; Corrupts registers:
874; Nothing (not even FLAGS)
875;--------------------------------------------------------------------
876%macro eROR4 1.nolist
877 FSIS ], %1
878 %if strpos
879 %assign m (00b << 6)
880 FSIS [bx+si], %1
881 %if strpos
882 %assign rm 000b
883 %else
884 FSIS [bx+di], %1
885 %if strpos
886 %assign rm 001b
887 %else
888 FSIS [bp+si], %1
889 %if strpos
890 %assign rm 010b
891 %else
892 FSIS [bp+di], %1
893 %if strpos
894 %assign rm 011b
895 %else
896 FSIS [si], %1
897 %if strpos
898 %assign rm 100b
899 %else
900 FSIS [di], %1
901 %if strpos
902 %assign rm 101b
903 %else
904 FSIS [bx], %1
905 %if strpos
906 %assign rm 111b
907 %else
908 %error "Memory operands are not (yet) fully supported by the eROR4 macro!"
909 %endif
910 %endif
911 %endif
912 %endif
913 %endif
914 %endif
915 %endif
916 %else
917 %assign m (11b << 6)
918 %ifidni %1, al
919 %assign rm regAL
920 %elifidni %1, ah
921 %assign rm regAH
922 %elifidni %1, bl
923 %assign rm regBL
924 %elifidni %1, bh
925 %assign rm regBH
926 %elifidni %1, cl
927 %assign rm regCL
928 %elifidni %1, ch
929 %assign rm regCH
930 %elifidni %1, dl
931 %assign rm regDL
932 %elifidni %1, dh
933 %assign rm regDH
934 %else
935 %error Invalid parameter passed to eROR4! (%1)
936 %endif
937 %endif
938 db 0Fh, 2Ah, m | rm
939%endmacro
940
941
942;--------------------------------------------------------------------
943; The ADD4S instruction available on NEC V20/V30 CPUs.
944;
945; Adds packed BCD string at xS:SI to packed BCD string at ES:DI
946; with (preferably even) nibble count in CL.
947;
948; eADD4S
949; Parameters:
950; CL: Number of packed BCD digits (nibbles in string) ranging
951; from 1 to 254. Should be an even number or the CPU will
952; treat it as CL+1.
953; xS:SI: Pointer to source string. Default segment is DS but
954; can be overridden.
955; ES:DI: Pointer to destination string.
956; Returns:
957; ES:DI: Pointer to destination string.
958; CF/ZF: Set according to result.
959; Corrupts registers:
960; All other FLAGS
961;--------------------------------------------------------------------
962%macro eADD4S 0.nolist
963 db 0Fh, 20h
964%endmacro
965
966
967;--------------------------------------------------------------------
968; The SUB4S instruction available on NEC V20/V30 CPUs.
969;
970; Subtracts packed BCD string at xS:SI from packed BCD string at ES:DI
971; with (preferably even) nibble count in CL.
972;
973; eSUB4S
974; Parameters:
975; CL: Number of packed BCD digits (nibbles in string) ranging
976; from 1 to 254. Should be an even number or the CPU will
977; treat it as CL+1.
978; xS:SI: Pointer to source string. Default segment is DS but
979; can be overridden.
980; ES:DI: Pointer to destination string.
981; Returns:
982; ES:DI: Pointer to destination string.
983; CF/ZF: Set according to result.
984; Corrupts registers:
985; All other FLAGS
986;--------------------------------------------------------------------
987%macro eSUB4S 0.nolist
988 db 0Fh, 22h
989%endmacro
990
991
992;--------------------------------------------------------------------
993; The CMP4S instruction available on NEC V20/V30 CPUs.
994;
995; Compares packed BCD string at xS:SI with packed BCD string at ES:DI
996; with (preferably even) nibble count in CL.
997;
998; eCMP4S
999; Parameters:
1000; CL: Number of packed BCD digits (nibbles in string) ranging
1001; from 1 to 254. Should be an even number or the CPU will
1002; treat it as CL+1.
1003; xS:SI: Pointer to source string. Default segment is DS but
1004; can be overridden.
1005; ES:DI: Pointer to destination string.
1006; Returns:
1007; CF/ZF: Set according to result.
1008; Corrupts registers:
1009; All other FLAGS
1010;--------------------------------------------------------------------
1011%macro eCMP4S 0.nolist
1012 db 0Fh, 26h
1013%endmacro
1014
1015
1016;--------------------------------------------------------------------
1017; The BRKEM instruction available on NEC V20/V30 CPUs.
1018;
1019; Starts 8080 CPU emulation mode by invoking the software interrupt in %1.
1020;
1021; eBRKEM
1022; Parameters:
1023; %1: 8-bit interrupt vector number
1024; Returns:
1025; Nothing
1026; Corrupts registers:
1027; Nothing
1028;--------------------------------------------------------------------
1029%macro eBRKEM 1.nolist
1030 %if %1 > 255
1031 %error Invalid parameter passed to eBRKEM! (%1 > 255)
1032 %else
1033 db 0Fh, 0FFh, %1
1034 %endif
1035%endmacro
1036
1037
1038;--------------------------------------------------------------------
1039; The CALLN instruction available on NEC V20/V30 CPUs.
1040;
1041; This instruction is used while in 8080 CPU emulation mode to invoke
1042; the native (x86) software interrupt in %1.
1043;
1044; eCALLN
1045; Parameters:
1046; %1: 8-bit interrupt vector number
1047; Returns:
1048; Nothing
1049; Corrupts registers:
1050; Nothing
1051;--------------------------------------------------------------------
1052%macro eCALLN 1.nolist
1053 %if %1 > 255
1054 %error Invalid parameter passed to eCALLN! (%1 > 255)
1055 %else
1056 db 0EDh, 0EDh, %1
1057 %endif
1058%endmacro
1059
1060
1061;--------------------------------------------------------------------
1062; The RETEM instruction available on NEC V20/V30 CPUs.
1063;
1064; Ends 8080 CPU emulation mode by returning from the software interrupt
1065; invoked by BRKEM.
1066;
1067; eRETEM
1068; Parameters:
1069; Nothing
1070; Returns:
1071; Nothing
1072; Corrupts registers:
1073; Nothing
1074;--------------------------------------------------------------------
1075%macro eRETEM 0.nolist
1076 db 0EDh, 0FDh
1077%endmacro
1078
1079
1080%endif ; NEC_V_INC
1081
Note: See TracBrowser for help on using the repository browser.