1 | ; File name : ATA_ID.inc |
---|
2 | ; Project name : IDE BIOS |
---|
3 | ; Created date : 30.10.2009 |
---|
4 | ; Last update : 12.3.2010 |
---|
5 | ; Author : Tomi Tilli |
---|
6 | ; Description : ATA Identify Drive information. |
---|
7 | %ifndef ATA_ID_INC |
---|
8 | %define ATA_ID_INC |
---|
9 | |
---|
10 | ; ATA-1 Drive Information struct |
---|
11 | ; F = Fixed value |
---|
12 | ; V = Variable value |
---|
13 | ; R = Reserved word |
---|
14 | ; X = Vendor specific word |
---|
15 | struc ATA1 |
---|
16 | .wGenCfg resw 1 ; 0F, General configuration bit-significant information |
---|
17 | .wCylCnt resw 1 ; 1F, Number of cylinders |
---|
18 | resw 1 ; 2R |
---|
19 | .wHeadCnt resw 1 ; 3F, Number of heads |
---|
20 | .wBpTrck resw 1 ; 4F, Number of unformatted bytes per track |
---|
21 | .wBpSect resw 1 ; 5F, Number of unformatted bytes per sector |
---|
22 | .wSPT resw 1 ; 6F, Number of sectors per track |
---|
23 | resw 3 ; 7...9X |
---|
24 | .strSerial resb 20 ; 10...19F, Serial number (20 ASCII characters, 0000h=not specified) |
---|
25 | .wBuffType resw 1 ; 20F, Buffer type |
---|
26 | .wBuffSize resw 1 ; 21F, Buffer size in 512 byte increments (0000h=not specified) |
---|
27 | .wEccCnt resw 1 ; 22F, # of ECC bytes avail on read/write long cmds (0000h=not spec'd) |
---|
28 | .strFirmW resb 8 ; 23...26F, Firmware revision (8 ASCII characters, 0000h=not specified) |
---|
29 | .strModel resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified) |
---|
30 | .bBlckSize resb 1 ; 47[0-7]F, Maximum number of sectors that can be transferred |
---|
31 | ; per interrupt on read and write multiple commands |
---|
32 | ; (00h=Read/write multiple commands not implemented) |
---|
33 | resb 1 ; 47[8-15]X |
---|
34 | .wDWIO resw 1 ; 48F, Can perform doubleword I/O (boolean) |
---|
35 | .wCaps resw 1 ; 49FRX, Capabilities |
---|
36 | resw 1 ; 50R |
---|
37 | resb 1 ; 51[0-7]X |
---|
38 | .bPIOTiming resb 1 ; 51[8-15]F, PIO data transfer cycle timing mode |
---|
39 | resb 1 ; 52[0-7]X |
---|
40 | .bDMATiming resb 1 ; 52[8-15]F, DMA data transfer cycle timing mode |
---|
41 | .wFields resw 1 ; 53FVR, Field (next words) validity bits |
---|
42 | |
---|
43 | ; Words 54-58 are valid only if bit0 is set in .wFields |
---|
44 | .wCurCyls resw 1 ; 54V, Number of current cylinders |
---|
45 | .wCurHeads resw 1 ; 55V, Number of current heads |
---|
46 | .wCurSPT resw 1 ; 56V, Number of current sectors per track |
---|
47 | .dwCurSCnt resd 1 ; 57...58V, Current capacity in sectors |
---|
48 | |
---|
49 | ; Words 59-63 are always valid |
---|
50 | .bBlockSel resb 1 ; 59[0-7]V, Current setting for number of sectors that |
---|
51 | ; can be transferred per interrupt on R/W multiple command |
---|
52 | .bBlockFlgs resb 1 ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid |
---|
53 | .dwLBACnt resd 1 ; 60...61F, Total number of user addressable sectors (LBA mode only) |
---|
54 | .bSDMASupp resb 1 ; 62[0-7]F, Single word DMA transfer modes supported |
---|
55 | .bSDMAAct resb 1 ; 62[8-15]V, Single word DMA transfer mode active |
---|
56 | .bMDMASupp resb 1 ; 63[0-7]F, Multiword DMA transfer modes supported |
---|
57 | .bMDMAAct resb 1 ; 63[8-15]V, Multiword DMA transfer mode active |
---|
58 | endstruc |
---|
59 | |
---|
60 | ; ATA-1 Word 0, General configuration |
---|
61 | A1_wGenCfg_NONMAG EQU (1<<15) ; Reserved for non-magnetic drives |
---|
62 | A1_wGenCfg_FGAPREQ EQU (1<<14) ; Format speed tolerance gap required |
---|
63 | A1_wGenCfg_TRCKOFF EQU (1<<13) ; Track offset option available |
---|
64 | A1_wGenCfg_DATAOFF EQU (1<<12) ; Data strobe offset option available |
---|
65 | A1_wGenCfg_ROTTOL EQU (1<<11) ; Rotational speed tolerance is > 0,5% |
---|
66 | A1_wGenCfg_XFERFAST EQU (1<<10) ; Disk transfer rate > 10 Mbs |
---|
67 | A1_wGenCfg_XFERMED EQU (1<<9) ; Disk transfer rate > 5Mbs but <= 10Mbs |
---|
68 | A1_wGenCfg_XFERSLOW EQU (1<<8) ; Disk transfer rate <= 5Mbs |
---|
69 | A1_wGenCfg_REMOVABLE EQU (1<<7) ; Removable cartridge drive |
---|
70 | A1_wGenCfg_FIXED EQU (1<<6) ; Fixed drive |
---|
71 | A1_wGenCfg_MOTCTRL EQU (1<<5) ; Spindle motor control option implemented |
---|
72 | A1_wGenCfg_HEADSLOW EQU (1<<4) ; Head switch time > 15 usec |
---|
73 | A1_wGenCfg_NOTMFM EQU (1<<3) ; Not MFM encoded |
---|
74 | A1_wGenCfg_SOFTSECT EQU (1<<2) ; Soft sectored |
---|
75 | A1_wGenCfg_HARDSECT EQU (1<<1) ; Hard sectored |
---|
76 | |
---|
77 | ; ATA-1 Word 49, Capabilities |
---|
78 | A1_wCaps_LBA EQU (1<<9) ; LBA supported |
---|
79 | A1_wCaps_DMA EQU (1<<8) ; DMA supported |
---|
80 | |
---|
81 | ; ATA-1 Word 53, Fields |
---|
82 | A1_wFields_54to58 EQU (1<<0) ; The fields reported in words 54-58 are valid |
---|
83 | |
---|
84 | ; ATA-1 Word 59 high byte, Block mode flags |
---|
85 | A1_bBlockFlgs_VALID EQU (1<<0) ; Multiple sector setting (bBlockSel) is valid |
---|
86 | |
---|
87 | |
---|
88 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
---|
89 | |
---|
90 | ; ATA-2 Drive Information struct |
---|
91 | ; F = Fixed value |
---|
92 | ; V = Variable value |
---|
93 | ; R = Reserved word |
---|
94 | ; X = Vendor specific word |
---|
95 | struc ATA2 |
---|
96 | .wGenCfg resw 1 ; 0F, General configuration bit-significant information |
---|
97 | .wCylCnt resw 1 ; 1F, Number of logical cylinders |
---|
98 | resw 1 ; 2R |
---|
99 | .wHeadCnt resw 1 ; 3F, Number of logical heads |
---|
100 | resw 1 ; 4X |
---|
101 | resw 1 ; 5X |
---|
102 | .wSPT resw 1 ; 6F, Number of logical sectors per track |
---|
103 | resw 3 ; 7...9X |
---|
104 | .strSerial resb 20 ; 10...19F, Serial number (20 ASCII characters, 0000h=not specified) |
---|
105 | resw 1 ; 20X |
---|
106 | resw 1 ; 21X |
---|
107 | .wEccCnt resw 1 ; 22F, # of ECC bytes avail on read/write long cmds (0000h=not spec'd) |
---|
108 | .strFirmW resb 8 ; 23...26F, Firmware revision (8 ASCII characters, 0000h=not specified) |
---|
109 | .strModel resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified) |
---|
110 | .bBlckSize resb 1 ; 47[0-7]F, Maximum number of sectors that can be transferred |
---|
111 | ; per interrupt on read and write multiple commands |
---|
112 | ; (00h=Read/write multiple commands not implemented) |
---|
113 | resb 1 ; 47[8-15]X |
---|
114 | resw 1 ; 48R |
---|
115 | .wCaps resw 1 ; 49FRX, Capabilities |
---|
116 | resw 1 ; 50R |
---|
117 | resb 1 ; 51[0-7]X |
---|
118 | .bPIOTiming resb 1 ; 51[8-15]F, PIO data transfer cycle timing mode |
---|
119 | resb 1 ; 52[0-7]X |
---|
120 | .bDMATiming resb 1 ; 52[8-15]F, DMA data transfer cycle timing mode |
---|
121 | .wFields resw 1 ; 53FVR, Field (next words) validity bits |
---|
122 | |
---|
123 | ; Words 54-58 are valid only if bit0 is set in .wFields |
---|
124 | .wCurCyls resw 1 ; 54V, Number of current logical cylinders |
---|
125 | .wCurHeads resw 1 ; 55V, Number of current logical heads |
---|
126 | .wCurSPT resw 1 ; 56V, Number of current logical sectors per track |
---|
127 | .dwCurSCnt resd 1 ; 57...58V, Current capacity in sectors |
---|
128 | |
---|
129 | ; Words 59-63 are always valid |
---|
130 | .bBlockSel resb 1 ; 59[0-7]V, Current setting for number of sectors that |
---|
131 | ; can be transferred per interrupt on R/W multiple command |
---|
132 | .bBlockFlgs resb 1 ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid |
---|
133 | .dwLBACnt resd 1 ; 60...61F, Total number of user addressable sectors (LBA mode only) |
---|
134 | .bSDMASupp resb 1 ; 62[0-7]F, Single word DMA transfer modes supported |
---|
135 | .bSDMAAct resb 1 ; 62[8-15]V, Single word DMA transfer mode active |
---|
136 | .bMDMASupp resb 1 ; 63[0-7]F, Multiword DMA transfer modes supported |
---|
137 | .bMDMAAct resb 1 ; 63[8-15]V, Multiword DMA transfer mode active |
---|
138 | |
---|
139 | ; Words 64-70 are valid only if bit1 is set in .wFields (ATA2+) |
---|
140 | .bPIOSupp resb 1 ; 64[0-7]F, Advanced PIO Transfer Modes Supported |
---|
141 | resb 1 ; 64[8-15]R |
---|
142 | .wMDMAMinCy resw 1 ; 65F, Minimum Multiword DMA Transfer Cycle Time Per Word |
---|
143 | .wMDMARecCy resw 1 ; 66F, Manufacturers Recommended Multiword DMA Transfer Cycle Time |
---|
144 | .wPIOMinCy resw 1 ; 67F, Minimum PIO Transfer Cycle Time Without Flow Control |
---|
145 | .wPIOMinCyF resw 1 ; 68F, Minimum PIO Transfer Cycle Time With IORDY Flow Control |
---|
146 | endstruc |
---|
147 | |
---|
148 | ; ATA-2 Word 0, General configuration |
---|
149 | A2_wGenCfg_NONMAG EQU (1<<15) ; Reserved for non-magnetic drives |
---|
150 | A2_wGenCfg_REMOVABLE EQU (1<<7) ; Removable media device |
---|
151 | A2_wGenCfg_FIXED EQU (1<<6) ; Not removable controller and/or device |
---|
152 | |
---|
153 | ; ATA-1 Word 49, Capabilities |
---|
154 | A2_wCaps_TIMER EQU (1<<13) ; Standby timer values as specified in this standard are supported |
---|
155 | A2_wCaps_IORDY EQU (1<<11) ; IORDY supported |
---|
156 | A2_wCaps_CANDISIORDY EQU (1<<10) ; IORDY can be disabled |
---|
157 | A2_wCaps_LBA EQU (1<<9) ; LBA supported |
---|
158 | A2_wCaps_DMA EQU (1<<8) ; DMA supported |
---|
159 | |
---|
160 | ; ATA-2 Word 53, Fields |
---|
161 | A2_wFields_54to58 EQU (1<<0) ; The fields reported in words 54-58 are valid |
---|
162 | A2_wFields_64to70 EQU (1<<1) ; The fields reported in words 64-70 are valid |
---|
163 | |
---|
164 | ; ATA-2 Word 59 high byte, Block mode flags |
---|
165 | A2_bBlockFlgs_VALID EQU (1<<0) ; Multiple sector setting (bBlockSel) is valid |
---|
166 | |
---|
167 | |
---|
168 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
---|
169 | |
---|
170 | ; ATA-6 Drive Information struct |
---|
171 | ; F = Fixed value |
---|
172 | ; V = Variable value |
---|
173 | ; R = Reserved word |
---|
174 | ; X = Vendor specific word |
---|
175 | struc ATA6 |
---|
176 | .wGenCfg resw 1 ; 0F, General configuration bit-significant information |
---|
177 | resw 1 ; 1X, Obsolete (Number of logical cylinders) |
---|
178 | resw 1 ; 2V, Specific configuration |
---|
179 | resw 1 ; 3X, Obsolete (Number of logical heads) |
---|
180 | resw 1 ; 4X |
---|
181 | resw 1 ; 5X |
---|
182 | resw 1 ; 6X, Obsolete (Number of logical sectors per track) |
---|
183 | resw 2 ; 7...8V, Reserved for assignment by the CompactFlash Association |
---|
184 | resw 1 ; 9X |
---|
185 | .strSerial resb 20 ; 10...19F, Serial number (20 ASCII characters, 0000h=not specified) |
---|
186 | resw 1 ; 20X |
---|
187 | resw 1 ; 21X |
---|
188 | resw 1 ; 22X, Obsolete (# of ECC bytes avail on read/write long cmds (0000h=not spec'd)) |
---|
189 | .strFirmW resb 8 ; 23...26F, Firmware revision (8 ASCII characters, 0000h=not specified) |
---|
190 | .strModel resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified) |
---|
191 | .bBlckSize resb 1 ; 47[0-7]F, Maximum number of sectors that can be transferred |
---|
192 | ; per interrupt on read and write multiple commands |
---|
193 | ; (00h=Read/write multiple commands not implemented) |
---|
194 | resb 1 ; 47[8-15]F, 80h |
---|
195 | resw 1 ; 48R |
---|
196 | .wCaps resw 1 ; 49FX, Capabilities |
---|
197 | .wCapsHigh resw 1 ; 50FX, Capabilities 2 |
---|
198 | resw 1 ; 51X, Obsolete (PIO data transfer cycle timing mode) |
---|
199 | resw 1 ; 52X, Obsolete (DMA data transfer cycle timing mode) |
---|
200 | .wFields resw 1 ; 53FX, Field (next words) validity bits |
---|
201 | |
---|
202 | ; Words 54-58 are valid only if bit0 is set in .wFields |
---|
203 | resw 1 ; 54X, Obsolete (Number of current logical cylinders) |
---|
204 | resw 1 ; 55X, Obsolete (Number of current logical heads) |
---|
205 | resw 1 ; 56X, Obsolete (Number of current logical sectors per track) |
---|
206 | resd 1 ; 57...58X, Obsolete (Current capacity in sectors) |
---|
207 | |
---|
208 | ; Words 59-63 are always valid |
---|
209 | .bBlockSel resb 1 ; 59[0-7]V, Current setting for number of sectors that |
---|
210 | ; can be transferred per interrupt on R/W multiple command |
---|
211 | .bBlockFlgs resb 1 ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid |
---|
212 | .dwLBACnt resd 1 ; 60...61F, Total number of user addressable sectors (LBA-28) |
---|
213 | resb 1 ; 62[0-7]X, Obsolete (Single word DMA transfer modes supported) |
---|
214 | resb 1 ; 62[8-15]X, Obsolete (Single word DMA transfer mode active) |
---|
215 | .wMDMA resw 1 ; 63FV, Multiword DMA transfer modes supported and active |
---|
216 | |
---|
217 | ; Words 64-70 are valid only if bit1 is set in .wFields (ATA2+) |
---|
218 | .bPIOSupp resb 1 ; 64[0-7]F, Advanced PIO Transfer Modes Supported |
---|
219 | resb 1 ; 64[8-15]R |
---|
220 | .wMDMAMinCy resw 1 ; 65F, Minimum Multiword DMA Transfer Cycle Time Per Word |
---|
221 | .wMDMARecCy resw 1 ; 66F, Manufacturers Recommended Multiword DMA Transfer Cycle Time |
---|
222 | .wPIOMinCy resw 1 ; 67F, Minimum PIO Transfer Cycle Time Without Flow Control |
---|
223 | .wPIOMinCyF resw 1 ; 68F, Minimum PIO Transfer Cycle Time With IORDY Flow Control |
---|
224 | resw 71-69 ; 69...70R |
---|
225 | |
---|
226 | ; Words 71...74 are reserved for IDENTIFY PACKET DEVICE command |
---|
227 | resw 75-71 ; 71...74R |
---|
228 | |
---|
229 | .wQueue resw 1 ; 75[0-4]F, Maximum queue depth - 1 |
---|
230 | resw 80-76 ; 76...79R |
---|
231 | |
---|
232 | .wMajorVer resw 1 ; 80F, Major Version Number |
---|
233 | .wMinorVer resw 1 ; 81F, Minor Version Number |
---|
234 | .wSetSup82 resw 1 ; 82F, Command set supported |
---|
235 | .wSetSup83 resw 1 ; 83F, Command sets supported |
---|
236 | .wSetSup84 resw 1 ; 84F, Command set / Feature supported extension |
---|
237 | .wEnFor82 resw 1 ; 85FV, Command set / feature enabled (for word 82) |
---|
238 | .wEnFor83 resw 1 ; 86FV, Command set / feature enabled (for word 83) |
---|
239 | .wEnFor84 resw 1 ; 87FV, Command set / feature enabled (for word 84) |
---|
240 | |
---|
241 | ; Word 88 is valid only if bit2 is set in .wFields (word 53) |
---|
242 | .wUDMA resw 1 ; 88FV, Ultra DMA Mode support |
---|
243 | |
---|
244 | .wEraseTime resw 1 ; 89F, Time required for security erase unit completion |
---|
245 | .wEnhErTime resw 1 ; 90F, Time required for Enhanced security erase completion |
---|
246 | .wCurPower resw 1 ; 91V, Current advanced power management value |
---|
247 | .wPWRev resw 1 ; 92V, Master Password Revision Code |
---|
248 | .wReset resw 1 ; 93FV, Hardware reset result |
---|
249 | .bCurAcous resb 1 ; 94[0-7]V, Current automatic acoustic management value |
---|
250 | .bRecAcous resb 1 ; 94[8-15]V, Vendors recommended acoustic management value |
---|
251 | resw 100-95 ; 95...99R |
---|
252 | .qwLBACnt resb 8 ; 100...103V, Total number of user addressable sectors (LBA48) |
---|
253 | resw 127-104 ; 104...126R |
---|
254 | .wRMSN resw 1 ; 127F, Removable Media Status Notification feature set support |
---|
255 | .wSecurity resw 1 ; 128FV, Security Status |
---|
256 | resw 160-129 ; 129...159X |
---|
257 | .wCFAPower resw 1 ; 160FV, CFA Power Mode 1 |
---|
258 | resw 176-161 ; 161...175R, Reserved for assignment by the CompactFlash Association |
---|
259 | .strMediaSr resw 206-176 ; 176...205V, Current media serial number |
---|
260 | resw 255-206 ; 206...254R |
---|
261 | .bSignature resb 1 ; 255[0-7]X, Signature |
---|
262 | .bChecksum resb 1 ; 255[8-15]X, Checksum |
---|
263 | endstruc |
---|
264 | |
---|
265 | ; ATA-6 Word 0, General configuration |
---|
266 | A6_wGenCfg_REMOVABLE EQU (1<<7) ; Removable media device |
---|
267 | A6_wGenCfg_INCOMPLETE EQU (1<<2) ; Response incomplete |
---|
268 | |
---|
269 | ; ATA-6 Word 49, Capabilities |
---|
270 | A6_wCaps_TIMER EQU (1<<13) ; Standby timer values as specified in this standard are supported |
---|
271 | A6_wCaps_IORDY EQU (1<<11) ; IORDY supported |
---|
272 | A6_wCaps_CANDISIORDY EQU (1<<10) ; IORDY can be disabled |
---|
273 | A6_wCaps_LBA EQU (1<<9) ; LBA supported |
---|
274 | A6_wCaps_DMA EQU (1<<8) ; DMA supported |
---|
275 | |
---|
276 | ; ATA-6 Word 53, Fields |
---|
277 | A6_wFields_88 EQU (1<<2) ; The fields reported in word 88 are valid |
---|
278 | A6_wFields_64to70 EQU (1<<1) ; The fields reported in words 64-70 are valid |
---|
279 | |
---|
280 | ; ATA-6 Word 59 high byte, Block mode flags |
---|
281 | A6_bBlockFlgs_VALID EQU (1<<0) ; Multiple sector setting (bBlockSel) is valid |
---|
282 | |
---|
283 | ; ATA-6 Word 63, Multiword DMA Mode |
---|
284 | A6_wMDMA_MODE2_SELECTED EQU (1<<10) ; Multiword DMA mode 2 is selected |
---|
285 | A6_wMDMA_MODE1_SELECTED EQU (1<<9) ; Multiword DMA mode 1 is selected |
---|
286 | A6_wMDMA_MODE0_SELECTED EQU (1<<8) ; Multiword DMA mode 0 is selected |
---|
287 | A6_wMDMA_MODE2_SUPRTD EQU (1<<2) ; Multiword DMA mode 2 and below are supported |
---|
288 | A6_wMDMA_MODE1_SUPRTD EQU (1<<1) ; Multiword DMA mode 1 and below are supported |
---|
289 | A6_wMDMA_MODE0_SUPRTD EQU (1<<0) ; Multiword DMA mode 0 is supported |
---|
290 | |
---|
291 | ; ATA-6 Word 80, Major version number |
---|
292 | A6_wMajorVer_ATA6 EQU (1<<6) |
---|
293 | A6_wMajorVer_ATA5 EQU (1<<5) |
---|
294 | A6_wMajorVer_ATA4 EQU (1<<4) |
---|
295 | A6_wMajorVer_ATA3 EQU (1<<3) |
---|
296 | |
---|
297 | ; ATA-6 Word 82, Command set supported |
---|
298 | A6_wSetSup82_NOP EQU (1<<14) ; NOP command supported |
---|
299 | A6_wSetSup82_RDBUFF EQU (1<<13) ; READ BUFFER command supported |
---|
300 | A6_wSetSup82_WRBUFF EQU (1<<12) ; WRITE BUFFER command supported |
---|
301 | A6_wSetSup82_PROT_AREA EQU (1<<10) ; Host Protected Area feature set supported |
---|
302 | A6_wSetSup82_DEV_RESET EQU (1<<9) ; DEVICE RESET command supported |
---|
303 | A6_wSetSup82_SERVICE EQU (1<<8) ; SERVICE interrupt supported |
---|
304 | A6_wSetSup82_RELEASE EQU (1<<7) ; Release interrupt supported |
---|
305 | A6_wSetSup82_LOOKAHEAD EQU (1<<6) ; Look-ahead supported |
---|
306 | A6_wSetSup82_WRCACHE EQU (1<<5) ; Write cache supported |
---|
307 | A6_wSetSup82_POWERMAN EQU (1<<3) ; Power Management feature set supported |
---|
308 | A6_wSetSup82_REM_MEDIA EQU (1<<2) ; Removable Media feature set supported |
---|
309 | A6_wSetSup82_SECURITY EQU (1<<1) ; Security Mode feature set supported |
---|
310 | A6_wSetSup82_SMART EQU (1<<0) ; SMART feature set supported |
---|
311 | |
---|
312 | ; ATA-6 Word 83, Command sets supported |
---|
313 | A6_wSetSup83_FLUSH_EXT EQU (1<<13) ; FLUSH CACHE EXT command supported |
---|
314 | A6_wSetSup83_FLUSH EQU (1<<12) ; FLUSH CACHE command supported |
---|
315 | A6_wSetSup83_CFG EQU (1<<11) ; Device Configuration Overlay feature set supported |
---|
316 | A6_wSetSup83_LBA48 EQU (1<<10) ; 48-bit LBA feature set supported |
---|
317 | A6_wSetSup83_ACOUSTIC EQU (1<<9) ; Automatic Acoustic Management feature set supported |
---|
318 | A6_wSetSup83_SET_MAX EQU (1<<8) ; SET MAX security extension supported |
---|
319 | A6_wSetSup83_FEATURES EQU (1<<6) ; SET FEATURES subcommand required to spinup after power-up |
---|
320 | A6_wSetSup83_POWERUP EQU (1<<5) ; Power-Up In Standby feature set supported |
---|
321 | A6_wSetSup83_RMSN EQU (1<<4) ; Removable Media Status Notification feature set supported |
---|
322 | A6_wSetSup83_APM EQU (1<<3) ; Advanced Power Management feature set supported |
---|
323 | A6_wSetSup83_CFA EQU (1<<2) ; CFA feature set supported |
---|
324 | A6_wSetSup83_DMAQUEUED EQU (1<<1) ; READ/WRITE DMA QUEUED supported |
---|
325 | A6_wSetSup83_MICROCODE EQU (1<<0) ; DOWNLOAD MICROCODE command supported |
---|
326 | |
---|
327 | ; ATA-6 Word 84, Command set/feature supported extension |
---|
328 | A6_wSetSup84_GENLOG EQU (1<<5) ; General Purpose Logging feature set supported |
---|
329 | A6_wSetSup84_MEDIAPASS EQU (1<<3) ; Media Card Pass Through Command feature set supported |
---|
330 | A6_wSetSup84_MEDIASER EQU (1<<2) ; Media serial number supported |
---|
331 | A6_wSetSup84_SMARTTEST EQU (1<<1) ; SMART self-test supported |
---|
332 | A6_wSetSup84_SMARTLOG EQU (1<<0) ; SMART error logging supported |
---|
333 | |
---|
334 | ; ATA-6 Word 85, Command set/feature enabled (supported by word 82) |
---|
335 | A6_wEnFor82_NOP EQU (1<<14) ; NOP command enabled |
---|
336 | A6_wEnFor82_RDBUFF EQU (1<<13) ; READ BUFFER command enabled |
---|
337 | A6_wEnFor82_WRBUFF EQU (1<<12) ; WRITE BUFFER command enabled |
---|
338 | A6_wEnFor82_PROT_AREA EQU (1<<10) ; Host Protected Area feature set enabled |
---|
339 | A6_wEnFor82_DEV_RESET EQU (1<<9) ; DEVICE RESET command enabled |
---|
340 | A6_wEnFor82_SERVICE EQU (1<<8) ; SERVICE interrupt enabled |
---|
341 | A6_wEnFor82_RELEASE EQU (1<<7) ; Release interrupt enabled |
---|
342 | A6_wEnFor82_LOOKAHEAD EQU (1<<6) ; Look-ahead enabled |
---|
343 | A6_wEnFor82_WRCACHE EQU (1<<5) ; Write cache enabled |
---|
344 | A6_wEnFor82_POWERMAN EQU (1<<3) ; Power Management feature set enabled |
---|
345 | A6_wEnFor82_REM_MEDIA EQU (1<<2) ; Removable Media feature set enabled |
---|
346 | A6_wEnFor82_SECURITY EQU (1<<1) ; Security Mode feature set enabled |
---|
347 | A6_wEnFor82_SMART EQU (1<<0) ; SMART feature set enabled |
---|
348 | |
---|
349 | ; ATA-6 Word 86, Command set/feature enabled (supported by word 83) |
---|
350 | A6_wEnFor83_FLUSH_EXT EQU (1<<13) ; FLUSH CACHE EXT command supported |
---|
351 | A6_wEnFor83_FLUSH EQU (1<<12) ; FLUSH CACHE command supported |
---|
352 | A6_wEnFor83_CFG EQU (1<<11) ; Device Configuration Overlay supported |
---|
353 | A6_wEnFor83_LBA48 EQU (1<<10) ; 48-bit LBA feature set supported |
---|
354 | A6_wEnFor83_ACOUSTIC EQU (1<<9) ; Automatic Acoustic Management feature set enabled |
---|
355 | A6_wEnFor83_SET_MAX EQU (1<<8) ; SET MAX security extension enabled by SET MAX SET PASSWORD |
---|
356 | A6_wEnFor83_FEATURES EQU (1<<6) ; SET FEATURES subcommand required to spinup after power-up |
---|
357 | A6_wEnFor83_POWERUP EQU (1<<5) ; Power-Up In Standby feature set enabled |
---|
358 | A6_wEnFor83_RMSN EQU (1<<4) ; Removable Media Status Notification feature set enabled |
---|
359 | A6_wEnFor83_APM EQU (1<<3) ; Advanced Power Management feature set enabled |
---|
360 | A6_wEnFor83_CFA EQU (1<<2) ; CFA feature set enabled |
---|
361 | A6_wEnFor83_DMAQUEUED EQU (1<<1) ; READ/WRITE DMA QUEUED supported |
---|
362 | A6_wEnFor83_MICROCODE EQU (1<<0) ; DOWNLOAD MICROCODE command supported |
---|
363 | |
---|
364 | ; ATA-6 Word 87, Command set/feature default |
---|
365 | A6_wEnFor84_GENLOG EQU (1<<5) ; General Purpose Logging feature set supported |
---|
366 | A6_wEnFor84_MEDIAPASS EQU (1<<3) ; Media Card Pass Through Command feature set enabled |
---|
367 | A6_wEnFor84_MEDIASER EQU (1<<2) ; Media serial number is valid |
---|
368 | A6_wEnFor84_SMARTTEST EQU (1<<1) ; SMART self-test supported |
---|
369 | A6_wEnFor84_SMARTLOG EQU (1<<0) ; SMART error logging supported |
---|
370 | |
---|
371 | ; ATA-6 Word 88, Ultra DMA Mode |
---|
372 | A6_wUDMA_MODE5_SELECTED EQU (1<<13) ; Ultra DMA mode 5 is selected |
---|
373 | A6_wUDMA_MODE4_SELECTED EQU (1<<12) ; Ultra DMA mode 4 is selected |
---|
374 | A6_wUDMA_MODE3_SELECTED EQU (1<<11) ; Ultra DMA mode 3 is selected |
---|
375 | A6_wUDMA_MODE2_SELECTED EQU (1<<10) ; Ultra DMA mode 2 is selected |
---|
376 | A6_wUDMA_MODE1_SELECTED EQU (1<<9) ; Ultra DMA mode 1 is selected |
---|
377 | A6_wUDMA_MODE0_SELECTED EQU (1<<8) ; Ultra DMA mode 0 is selected |
---|
378 | A6_wUDMA_MODE5_SUPRTD EQU (1<<5) ; Ultra DMA mode 5 and below are supported |
---|
379 | A6_wUDMA_MODE4_SUPRTD EQU (1<<4) ; Ultra DMA mode 4 and below are supported |
---|
380 | A6_wUDMA_MODE3_SUPRTD EQU (1<<3) ; Ultra DMA mode 3 and below are supported |
---|
381 | A6_wUDMA_MODE2_SUPRTD EQU (1<<2) ; Ultra DMA mode 2 and below are supported |
---|
382 | A6_wUDMA_MODE1_SUPRTD EQU (1<<1) ; Ultra DMA mode 1 and below are supported |
---|
383 | A6_wUDMA_MODE0_SUPRTD EQU (1<<0) ; Ultra DMA mode 0 is supported |
---|
384 | |
---|
385 | ; ATA-6 Word 93, Hardware reset result |
---|
386 | A6_wReset_CBLID_BELOW EQU (1<<13) ; Device detected CBLID- above ViH |
---|
387 | A6_wReset_DEV1_PDIAG EQU (1<<11) ; Device 1 asserted PDIAG- |
---|
388 | A6_wReset_DEV0_RESP_D1 EQU (1<<6) ; Device 0 responds when Device 1 is selected |
---|
389 | A6_wReset_DEV0_DASP EQU (1<<5) ; Device 0 detected the assertion of DASP- |
---|
390 | A6_wReset_DEV0_PDIAG EQU (1<<4) ; Device 0 detected the assertion of PDIAG |
---|
391 | A6_wReset_DEV0_PASSED EQU (1<<3) ; Device 0 passed diagnostics |
---|
392 | A6_wReset_MASK_DEV1_DETERMINE EQU ((1<<10)|(1<<9)) ; These bits indicate how Device 1 determined the device number |
---|
393 | A6_wReset_MASK_DEV0_DETERMINE EQU ((1<<2)|(1<<1)) ; These bits indicate how Device 0 determined the device number: |
---|
394 | A6_wReset_RESERVED EQU 00b |
---|
395 | A6_wReset_JUMPER EQU 01b ; a jumper was used |
---|
396 | A6_wReset_CSEL EQU 10b ; the CSEL signal was used |
---|
397 | A6_wReset_UNKNOWN EQU 11b ; some other method was used or the method is unknown |
---|
398 | |
---|
399 | ; ATA-6 Word 127, Removable Media Status Notification feature set support |
---|
400 | A6_wRMSN_SUPPORTED EQU (1<<0) ; Removable Media Status Notification feature supported |
---|
401 | |
---|
402 | ; ATA-6 Word 128, Security status |
---|
403 | A6_wSecurity_MAX EQU (1<<8) ; Security level 0 = High, 1 = Maximum |
---|
404 | A6_wSecurity_ENH_ERASE EQU (1<<5) ; Enhanced security erase supported |
---|
405 | A6_wSecurity_EXPIRED EQU (1<<4) ; Security count expired |
---|
406 | A6_wSecurity_FROZEN EQU (1<<3) ; Security frozen |
---|
407 | A6_wSecurity_LOCKED EQU (1<<2) ; Security locked |
---|
408 | A6_wSecurity_ENABLED EQU (1<<1) ; Security enabled |
---|
409 | A6_wSecurity_SUPPORTED EQU (1<<0) ; Security supported |
---|
410 | |
---|
411 | ; ATA-6 Word 160, CFA Power Mode 1 |
---|
412 | A6_wCFAPower_WORDSUPP EQU (1<<15) ; Word 160 supported |
---|
413 | A6_wCFAPower_REQUIRED EQU (1<<13) ; CFA power mode 1 is required for one or more commands implemented by the device |
---|
414 | A6_wCFAPower_DISABLED EQU (1<<12) ; CFA power mode 1 disabled |
---|
415 | A6_wCFAPower_MASK_mA EQU 0FFFh ; Maximum current in mA |
---|
416 | |
---|
417 | |
---|
418 | %endif ; ATA_ID_INC |
---|