source: xtideuniversalbios/tags/XTIDE_Universal_BIOS_v1.1.1/Inc/ATA_ID.inc

Last change on this file was 3, checked in by aitotat, 14 years ago
File size: 21.2 KB
Line 
1; File name     :   ATA_ID.inc
2; Project name  :   IDE BIOS
3; Created date  :   30.10.2009
4; Last update   :   12.3.2010
5; Author        :   Tomi Tilli
6; Description   :   ATA Identify Drive information.
7%ifndef ATA_ID_INC
8%define ATA_ID_INC
9
10; ATA-1 Drive Information struct
11; F = Fixed value
12; V = Variable value
13; R = Reserved word
14; X = Vendor specific word
15struc ATA1
16    .wGenCfg    resw 1  ; 0F, General configuration bit-significant information
17    .wCylCnt    resw 1  ; 1F, Number of cylinders
18                resw 1  ; 2R
19    .wHeadCnt   resw 1  ; 3F, Number of heads
20    .wBpTrck    resw 1  ; 4F, Number of unformatted bytes per track
21    .wBpSect    resw 1  ; 5F, Number of unformatted bytes per sector
22    .wSPT       resw 1  ; 6F, Number of sectors per track
23                resw 3  ; 7...9X
24    .strSerial  resb 20 ; 10...19F, Serial number (20 ASCII characters, 0000h=not specified)
25    .wBuffType  resw 1  ; 20F, Buffer type
26    .wBuffSize  resw 1  ; 21F, Buffer size in 512 byte increments (0000h=not specified)
27    .wEccCnt    resw 1  ; 22F, # of ECC bytes avail on read/write long cmds (0000h=not spec'd)
28    .strFirmW   resb 8  ; 23...26F, Firmware revision (8 ASCII characters, 0000h=not specified)
29    .strModel   resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified)
30    .bBlckSize  resb 1  ; 47[0-7]F, Maximum number of sectors that can be transferred
31                        ;          per interrupt on read and write multiple commands
32                        ;          (00h=Read/write multiple commands not implemented)
33                resb 1  ; 47[8-15]X
34    .wDWIO      resw 1  ; 48F, Can perform doubleword I/O (boolean)
35    .wCaps      resw 1  ; 49FRX, Capabilities
36                resw 1  ; 50R
37                resb 1  ; 51[0-7]X
38    .bPIOTiming resb 1  ; 51[8-15]F, PIO data transfer cycle timing mode
39                resb 1  ; 52[0-7]X
40    .bDMATiming resb 1  ; 52[8-15]F, DMA data transfer cycle timing mode
41    .wFields    resw 1  ; 53FVR, Field (next words) validity bits
42
43    ; Words 54-58 are valid only if bit0 is set in .wFields
44    .wCurCyls   resw 1  ; 54V, Number of current cylinders
45    .wCurHeads  resw 1  ; 55V, Number of current heads
46    .wCurSPT    resw 1  ; 56V, Number of current sectors per track
47    .dwCurSCnt  resd 1  ; 57...58V, Current capacity in sectors
48
49    ; Words 59-63 are always valid
50    .bBlockSel  resb 1  ; 59[0-7]V, Current setting for number of sectors that
51                        ;           can be transferred per interrupt on R/W multiple command
52    .bBlockFlgs resb 1  ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid
53    .dwLBACnt   resd 1  ; 60...61F, Total number of user addressable sectors (LBA mode only)
54    .bSDMASupp  resb 1  ; 62[0-7]F, Single word DMA transfer modes supported
55    .bSDMAAct   resb 1  ; 62[8-15]V, Single word DMA transfer mode active
56    .bMDMASupp  resb 1  ; 63[0-7]F, Multiword DMA transfer modes supported
57    .bMDMAAct   resb 1  ; 63[8-15]V, Multiword DMA transfer mode active
58endstruc
59
60; ATA-1 Word 0, General configuration
61A1_wGenCfg_NONMAG       EQU (1<<15) ; Reserved for non-magnetic drives
62A1_wGenCfg_FGAPREQ      EQU (1<<14) ; Format speed tolerance gap required
63A1_wGenCfg_TRCKOFF      EQU (1<<13) ; Track offset option available
64A1_wGenCfg_DATAOFF      EQU (1<<12) ; Data strobe offset option available
65A1_wGenCfg_ROTTOL       EQU (1<<11) ; Rotational speed tolerance is > 0,5%
66A1_wGenCfg_XFERFAST     EQU (1<<10) ; Disk transfer rate > 10 Mbs
67A1_wGenCfg_XFERMED      EQU (1<<9)  ; Disk transfer rate > 5Mbs but <= 10Mbs
68A1_wGenCfg_XFERSLOW     EQU (1<<8)  ; Disk transfer rate <= 5Mbs
69A1_wGenCfg_REMOVABLE    EQU (1<<7)  ; Removable cartridge drive
70A1_wGenCfg_FIXED        EQU (1<<6)  ; Fixed drive
71A1_wGenCfg_MOTCTRL      EQU (1<<5)  ; Spindle motor control option implemented
72A1_wGenCfg_HEADSLOW     EQU (1<<4)  ; Head switch time > 15 usec
73A1_wGenCfg_NOTMFM       EQU (1<<3)  ; Not MFM encoded
74A1_wGenCfg_SOFTSECT     EQU (1<<2)  ; Soft sectored
75A1_wGenCfg_HARDSECT     EQU (1<<1)  ; Hard sectored
76
77; ATA-1 Word 49, Capabilities
78A1_wCaps_LBA            EQU (1<<9)  ; LBA supported
79A1_wCaps_DMA            EQU (1<<8)  ; DMA supported
80
81; ATA-1 Word 53, Fields
82A1_wFields_54to58       EQU (1<<0)  ; The fields reported in words 54-58 are valid
83
84; ATA-1 Word 59 high byte, Block mode flags
85A1_bBlockFlgs_VALID     EQU (1<<0)  ; Multiple sector setting (bBlockSel) is valid
86
87
88;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
89
90; ATA-2 Drive Information struct
91; F = Fixed value
92; V = Variable value
93; R = Reserved word
94; X = Vendor specific word
95struc ATA2
96    .wGenCfg    resw 1  ; 0F, General configuration bit-significant information
97    .wCylCnt    resw 1  ; 1F, Number of logical cylinders
98                resw 1  ; 2R
99    .wHeadCnt   resw 1  ; 3F, Number of logical heads
100                resw 1  ; 4X
101                resw 1  ; 5X
102    .wSPT       resw 1  ; 6F, Number of logical sectors per track
103                resw 3  ; 7...9X
104    .strSerial  resb 20 ; 10...19F, Serial number (20 ASCII characters, 0000h=not specified)
105                resw 1  ; 20X
106                resw 1  ; 21X
107    .wEccCnt    resw 1  ; 22F, # of ECC bytes avail on read/write long cmds (0000h=not spec'd)
108    .strFirmW   resb 8  ; 23...26F, Firmware revision (8 ASCII characters, 0000h=not specified)
109    .strModel   resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified)
110    .bBlckSize  resb 1  ; 47[0-7]F, Maximum number of sectors that can be transferred
111                        ;          per interrupt on read and write multiple commands
112                        ;          (00h=Read/write multiple commands not implemented)
113                resb 1  ; 47[8-15]X
114                resw 1  ; 48R
115    .wCaps      resw 1  ; 49FRX, Capabilities
116                resw 1  ; 50R
117                resb 1  ; 51[0-7]X
118    .bPIOTiming resb 1  ; 51[8-15]F, PIO data transfer cycle timing mode
119                resb 1  ; 52[0-7]X
120    .bDMATiming resb 1  ; 52[8-15]F, DMA data transfer cycle timing mode
121    .wFields    resw 1  ; 53FVR, Field (next words) validity bits
122
123    ; Words 54-58 are valid only if bit0 is set in .wFields
124    .wCurCyls   resw 1  ; 54V, Number of current logical cylinders
125    .wCurHeads  resw 1  ; 55V, Number of current logical heads
126    .wCurSPT    resw 1  ; 56V, Number of current logical sectors per track
127    .dwCurSCnt  resd 1  ; 57...58V, Current capacity in sectors
128
129    ; Words 59-63 are always valid
130    .bBlockSel  resb 1  ; 59[0-7]V, Current setting for number of sectors that
131                        ;           can be transferred per interrupt on R/W multiple command
132    .bBlockFlgs resb 1  ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid
133    .dwLBACnt   resd 1  ; 60...61F, Total number of user addressable sectors (LBA mode only)
134    .bSDMASupp  resb 1  ; 62[0-7]F, Single word DMA transfer modes supported
135    .bSDMAAct   resb 1  ; 62[8-15]V, Single word DMA transfer mode active
136    .bMDMASupp  resb 1  ; 63[0-7]F, Multiword DMA transfer modes supported
137    .bMDMAAct   resb 1  ; 63[8-15]V, Multiword DMA transfer mode active
138   
139    ; Words 64-70 are valid only if bit1 is set in .wFields (ATA2+)
140    .bPIOSupp   resb 1  ; 64[0-7]F, Advanced PIO Transfer Modes Supported
141                resb 1  ; 64[8-15]R
142    .wMDMAMinCy resw 1  ; 65F, Minimum Multiword DMA Transfer Cycle Time Per Word
143    .wMDMARecCy resw 1  ; 66F, Manufacturer’s Recommended Multiword DMA Transfer Cycle Time
144    .wPIOMinCy  resw 1  ; 67F, Minimum PIO Transfer Cycle Time Without Flow Control
145    .wPIOMinCyF resw 1  ; 68F, Minimum PIO Transfer Cycle Time With IORDY Flow Control
146endstruc
147
148; ATA-2 Word 0, General configuration
149A2_wGenCfg_NONMAG       EQU (1<<15) ; Reserved for non-magnetic drives
150A2_wGenCfg_REMOVABLE    EQU (1<<7)  ; Removable media device
151A2_wGenCfg_FIXED        EQU (1<<6)  ; Not removable controller and/or device
152
153; ATA-1 Word 49, Capabilities
154A2_wCaps_TIMER          EQU (1<<13) ; Standby timer values as specified in this standard are supported
155A2_wCaps_IORDY          EQU (1<<11) ; IORDY supported
156A2_wCaps_CANDISIORDY    EQU (1<<10) ; IORDY can be disabled
157A2_wCaps_LBA            EQU (1<<9)  ; LBA supported
158A2_wCaps_DMA            EQU (1<<8)  ; DMA supported
159
160; ATA-2 Word 53, Fields
161A2_wFields_54to58       EQU (1<<0)  ; The fields reported in words 54-58 are valid
162A2_wFields_64to70       EQU (1<<1)  ; The fields reported in words 64-70 are valid
163
164; ATA-2 Word 59 high byte, Block mode flags
165A2_bBlockFlgs_VALID     EQU (1<<0)  ; Multiple sector setting (bBlockSel) is valid
166
167
168;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
169
170; ATA-6 Drive Information struct
171; F = Fixed value
172; V = Variable value
173; R = Reserved word
174; X = Vendor specific word
175struc ATA6
176    .wGenCfg    resw 1  ; 0F, General configuration bit-significant information
177                resw 1  ; 1X, Obsolete (Number of logical cylinders)
178                resw 1  ; 2V, Specific configuration
179                resw 1  ; 3X, Obsolete (Number of logical heads)
180                resw 1  ; 4X
181                resw 1  ; 5X
182                resw 1  ; 6X, Obsolete (Number of logical sectors per track)
183                resw 2  ; 7...8V, Reserved for assignment by the CompactFlash Association
184                resw 1  ; 9X
185    .strSerial  resb 20 ; 10...19F, Serial number (20 ASCII characters, 0000h=not specified)
186                resw 1  ; 20X
187                resw 1  ; 21X
188                resw 1  ; 22X, Obsolete (# of ECC bytes avail on read/write long cmds (0000h=not spec'd))
189    .strFirmW   resb 8  ; 23...26F, Firmware revision (8 ASCII characters, 0000h=not specified)
190    .strModel   resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified)
191    .bBlckSize  resb 1  ; 47[0-7]F, Maximum number of sectors that can be transferred
192                        ;           per interrupt on read and write multiple commands
193                        ;           (00h=Read/write multiple commands not implemented)
194                resb 1  ; 47[8-15]F, 80h
195                resw 1  ; 48R
196    .wCaps      resw 1  ; 49FX, Capabilities
197    .wCapsHigh  resw 1  ; 50FX, Capabilities 2
198                resw 1  ; 51X, Obsolete (PIO data transfer cycle timing mode)
199                resw 1  ; 52X, Obsolete (DMA data transfer cycle timing mode)
200    .wFields    resw 1  ; 53FX, Field (next words) validity bits
201
202    ; Words 54-58 are valid only if bit0 is set in .wFields
203                resw 1  ; 54X, Obsolete (Number of current logical cylinders)
204                resw 1  ; 55X, Obsolete (Number of current logical heads)
205                resw 1  ; 56X, Obsolete (Number of current logical sectors per track)
206                resd 1  ; 57...58X, Obsolete (Current capacity in sectors)
207
208    ; Words 59-63 are always valid
209    .bBlockSel  resb 1  ; 59[0-7]V, Current setting for number of sectors that
210                        ;           can be transferred per interrupt on R/W multiple command
211    .bBlockFlgs resb 1  ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid
212    .dwLBACnt   resd 1  ; 60...61F, Total number of user addressable sectors (LBA-28)
213                resb 1  ; 62[0-7]X, Obsolete (Single word DMA transfer modes supported)
214                resb 1  ; 62[8-15]X, Obsolete (Single word DMA transfer mode active)
215    .wMDMA      resw 1  ; 63FV, Multiword DMA transfer modes supported and active
216
217    ; Words 64-70 are valid only if bit1 is set in .wFields (ATA2+)
218    .bPIOSupp   resb 1  ; 64[0-7]F, Advanced PIO Transfer Modes Supported
219                resb 1  ; 64[8-15]R
220    .wMDMAMinCy resw 1  ; 65F, Minimum Multiword DMA Transfer Cycle Time Per Word
221    .wMDMARecCy resw 1  ; 66F, Manufacturer’s Recommended Multiword DMA Transfer Cycle Time
222    .wPIOMinCy  resw 1  ; 67F, Minimum PIO Transfer Cycle Time Without Flow Control
223    .wPIOMinCyF resw 1  ; 68F, Minimum PIO Transfer Cycle Time With IORDY Flow Control
224                resw 71-69  ; 69...70R
225
226    ; Words 71...74 are reserved for IDENTIFY PACKET DEVICE command
227                resw 75-71  ; 71...74R
228
229    .wQueue     resw 1  ; 75[0-4]F, Maximum queue depth - 1
230                resw 80-76  ; 76...79R
231
232    .wMajorVer  resw 1  ; 80F, Major Version Number
233    .wMinorVer  resw 1  ; 81F, Minor Version Number
234    .wSetSup82  resw 1  ; 82F, Command set supported
235    .wSetSup83  resw 1  ; 83F, Command sets supported
236    .wSetSup84  resw 1  ; 84F, Command set / Feature supported extension
237    .wEnFor82   resw 1  ; 85FV, Command set / feature enabled (for word 82)
238    .wEnFor83   resw 1  ; 86FV, Command set / feature enabled (for word 83)
239    .wEnFor84   resw 1  ; 87FV, Command set / feature enabled (for word 84)
240
241    ; Word 88 is valid only if bit2 is set in .wFields (word 53)
242    .wUDMA      resw 1  ; 88FV, Ultra DMA Mode support
243
244    .wEraseTime resw 1  ; 89F, Time required for security erase unit completion
245    .wEnhErTime resw 1  ; 90F, Time required for Enhanced security erase completion
246    .wCurPower  resw 1  ; 91V, Current advanced power management value
247    .wPWRev     resw 1  ; 92V, Master Password Revision Code
248    .wReset     resw 1  ; 93FV, Hardware reset result
249    .bCurAcous  resb 1  ; 94[0-7]V, Current automatic acoustic management value
250    .bRecAcous  resb 1  ; 94[8-15]V, Vendor’s recommended acoustic management value
251                resw 100-95     ; 95...99R
252    .qwLBACnt   resb 8  ; 100...103V, Total number of user addressable sectors (LBA48)
253                resw 127-104    ; 104...126R
254    .wRMSN      resw 1  ; 127F, Removable Media Status Notification feature set support
255    .wSecurity  resw 1  ; 128FV, Security Status
256                resw 160-129    ; 129...159X
257    .wCFAPower  resw 1  ; 160FV, CFA Power Mode 1
258                resw 176-161    ; 161...175R, Reserved for assignment by the CompactFlash Association
259    .strMediaSr resw 206-176    ; 176...205V, Current media serial number
260                resw 255-206    ; 206...254R
261    .bSignature resb 1  ; 255[0-7]X, Signature
262    .bChecksum  resb 1  ; 255[8-15]X, Checksum
263endstruc
264
265; ATA-6 Word 0, General configuration
266A6_wGenCfg_REMOVABLE    EQU (1<<7)  ; Removable media device
267A6_wGenCfg_INCOMPLETE   EQU (1<<2)  ; Response incomplete
268
269; ATA-6 Word 49, Capabilities
270A6_wCaps_TIMER          EQU (1<<13) ; Standby timer values as specified in this standard are supported
271A6_wCaps_IORDY          EQU (1<<11) ; IORDY supported
272A6_wCaps_CANDISIORDY    EQU (1<<10) ; IORDY can be disabled
273A6_wCaps_LBA            EQU (1<<9)  ; LBA supported
274A6_wCaps_DMA            EQU (1<<8)  ; DMA supported
275
276; ATA-6 Word 53, Fields
277A6_wFields_88           EQU (1<<2)  ; The fields reported in word 88 are valid
278A6_wFields_64to70       EQU (1<<1)  ; The fields reported in words 64-70 are valid
279
280; ATA-6 Word 59 high byte, Block mode flags
281A6_bBlockFlgs_VALID     EQU (1<<0)  ; Multiple sector setting (bBlockSel) is valid
282
283; ATA-6 Word 63, Multiword DMA Mode
284A6_wMDMA_MODE2_SELECTED EQU (1<<10) ; Multiword DMA mode 2 is selected
285A6_wMDMA_MODE1_SELECTED EQU (1<<9)  ; Multiword DMA mode 1 is selected
286A6_wMDMA_MODE0_SELECTED EQU (1<<8)  ; Multiword DMA mode 0 is selected
287A6_wMDMA_MODE2_SUPRTD   EQU (1<<2)  ; Multiword DMA mode 2 and below are supported
288A6_wMDMA_MODE1_SUPRTD   EQU (1<<1)  ; Multiword DMA mode 1 and below are supported
289A6_wMDMA_MODE0_SUPRTD   EQU (1<<0)  ; Multiword DMA mode 0 is supported
290
291; ATA-6 Word 80, Major version number
292A6_wMajorVer_ATA6       EQU (1<<6)
293A6_wMajorVer_ATA5       EQU (1<<5)
294A6_wMajorVer_ATA4       EQU (1<<4)
295A6_wMajorVer_ATA3       EQU (1<<3)
296
297; ATA-6 Word 82, Command set supported
298A6_wSetSup82_NOP        EQU (1<<14) ; NOP command supported
299A6_wSetSup82_RDBUFF     EQU (1<<13) ; READ BUFFER command supported
300A6_wSetSup82_WRBUFF     EQU (1<<12) ; WRITE BUFFER command supported
301A6_wSetSup82_PROT_AREA  EQU (1<<10) ; Host Protected Area feature set supported
302A6_wSetSup82_DEV_RESET  EQU (1<<9)  ; DEVICE RESET command supported
303A6_wSetSup82_SERVICE    EQU (1<<8)  ; SERVICE interrupt supported
304A6_wSetSup82_RELEASE    EQU (1<<7)  ; Release interrupt supported
305A6_wSetSup82_LOOKAHEAD  EQU (1<<6)  ; Look-ahead supported
306A6_wSetSup82_WRCACHE    EQU (1<<5)  ; Write cache supported
307A6_wSetSup82_POWERMAN   EQU (1<<3)  ; Power Management feature set supported
308A6_wSetSup82_REM_MEDIA  EQU (1<<2)  ; Removable Media feature set supported
309A6_wSetSup82_SECURITY   EQU (1<<1)  ; Security Mode feature set supported
310A6_wSetSup82_SMART      EQU (1<<0)  ; SMART feature set supported
311
312; ATA-6 Word 83, Command sets supported
313A6_wSetSup83_FLUSH_EXT  EQU (1<<13) ; FLUSH CACHE EXT command supported
314A6_wSetSup83_FLUSH      EQU (1<<12) ; FLUSH CACHE command supported
315A6_wSetSup83_CFG        EQU (1<<11) ; Device Configuration Overlay feature set supported
316A6_wSetSup83_LBA48      EQU (1<<10) ; 48-bit LBA feature set supported
317A6_wSetSup83_ACOUSTIC   EQU (1<<9)  ; Automatic Acoustic Management feature set supported
318A6_wSetSup83_SET_MAX    EQU (1<<8)  ; SET MAX security extension supported
319A6_wSetSup83_FEATURES   EQU (1<<6)  ; SET FEATURES subcommand required to spinup after power-up
320A6_wSetSup83_POWERUP    EQU (1<<5)  ; Power-Up In Standby feature set supported
321A6_wSetSup83_RMSN       EQU (1<<4)  ; Removable Media Status Notification feature set supported
322A6_wSetSup83_APM        EQU (1<<3)  ; Advanced Power Management feature set supported
323A6_wSetSup83_CFA        EQU (1<<2)  ; CFA feature set supported
324A6_wSetSup83_DMAQUEUED  EQU (1<<1)  ; READ/WRITE DMA QUEUED supported
325A6_wSetSup83_MICROCODE  EQU (1<<0)  ; DOWNLOAD MICROCODE command supported
326
327; ATA-6 Word 84, Command set/feature supported extension
328A6_wSetSup84_GENLOG     EQU (1<<5)  ; General Purpose Logging feature set supported
329A6_wSetSup84_MEDIAPASS  EQU (1<<3)  ; Media Card Pass Through Command feature set supported
330A6_wSetSup84_MEDIASER   EQU (1<<2)  ; Media serial number supported
331A6_wSetSup84_SMARTTEST  EQU (1<<1)  ; SMART self-test supported
332A6_wSetSup84_SMARTLOG   EQU (1<<0)  ; SMART error logging supported
333
334; ATA-6 Word 85, Command set/feature enabled (supported by word 82)
335A6_wEnFor82_NOP         EQU (1<<14) ; NOP command enabled
336A6_wEnFor82_RDBUFF      EQU (1<<13) ; READ BUFFER command enabled
337A6_wEnFor82_WRBUFF      EQU (1<<12) ; WRITE BUFFER command enabled
338A6_wEnFor82_PROT_AREA   EQU (1<<10) ; Host Protected Area feature set enabled
339A6_wEnFor82_DEV_RESET   EQU (1<<9)  ; DEVICE RESET command enabled
340A6_wEnFor82_SERVICE     EQU (1<<8)  ; SERVICE interrupt enabled
341A6_wEnFor82_RELEASE     EQU (1<<7)  ; Release interrupt enabled
342A6_wEnFor82_LOOKAHEAD   EQU (1<<6)  ; Look-ahead enabled
343A6_wEnFor82_WRCACHE     EQU (1<<5)  ; Write cache enabled
344A6_wEnFor82_POWERMAN    EQU (1<<3)  ; Power Management feature set enabled
345A6_wEnFor82_REM_MEDIA   EQU (1<<2)  ; Removable Media feature set enabled
346A6_wEnFor82_SECURITY    EQU (1<<1)  ; Security Mode feature set enabled
347A6_wEnFor82_SMART       EQU (1<<0)  ; SMART feature set enabled
348
349; ATA-6 Word 86, Command set/feature enabled (supported by word 83)
350A6_wEnFor83_FLUSH_EXT   EQU (1<<13) ; FLUSH CACHE EXT command supported
351A6_wEnFor83_FLUSH       EQU (1<<12) ; FLUSH CACHE command supported
352A6_wEnFor83_CFG         EQU (1<<11) ; Device Configuration Overlay supported
353A6_wEnFor83_LBA48       EQU (1<<10) ; 48-bit LBA feature set supported
354A6_wEnFor83_ACOUSTIC    EQU (1<<9)  ; Automatic Acoustic Management feature set enabled
355A6_wEnFor83_SET_MAX     EQU (1<<8)  ; SET MAX security extension enabled by SET MAX SET PASSWORD
356A6_wEnFor83_FEATURES    EQU (1<<6)  ; SET FEATURES subcommand required to spinup after power-up
357A6_wEnFor83_POWERUP     EQU (1<<5)  ; Power-Up In Standby feature set enabled
358A6_wEnFor83_RMSN        EQU (1<<4)  ; Removable Media Status Notification feature set enabled
359A6_wEnFor83_APM         EQU (1<<3)  ; Advanced Power Management feature set enabled
360A6_wEnFor83_CFA         EQU (1<<2)  ; CFA feature set enabled
361A6_wEnFor83_DMAQUEUED   EQU (1<<1)  ; READ/WRITE DMA QUEUED supported
362A6_wEnFor83_MICROCODE   EQU (1<<0)  ; DOWNLOAD MICROCODE command supported
363
364; ATA-6 Word 87, Command set/feature default
365A6_wEnFor84_GENLOG      EQU (1<<5)  ; General Purpose Logging feature set supported
366A6_wEnFor84_MEDIAPASS   EQU (1<<3)  ; Media Card Pass Through Command feature set enabled
367A6_wEnFor84_MEDIASER    EQU (1<<2)  ; Media serial number is valid
368A6_wEnFor84_SMARTTEST   EQU (1<<1)  ; SMART self-test supported
369A6_wEnFor84_SMARTLOG    EQU (1<<0)  ; SMART error logging supported
370
371; ATA-6 Word 88, Ultra DMA Mode
372A6_wUDMA_MODE5_SELECTED EQU (1<<13) ; Ultra DMA mode 5 is selected
373A6_wUDMA_MODE4_SELECTED EQU (1<<12) ; Ultra DMA mode 4 is selected
374A6_wUDMA_MODE3_SELECTED EQU (1<<11) ; Ultra DMA mode 3 is selected
375A6_wUDMA_MODE2_SELECTED EQU (1<<10) ; Ultra DMA mode 2 is selected
376A6_wUDMA_MODE1_SELECTED EQU (1<<9)  ; Ultra DMA mode 1 is selected
377A6_wUDMA_MODE0_SELECTED EQU (1<<8)  ; Ultra DMA mode 0 is selected
378A6_wUDMA_MODE5_SUPRTD   EQU (1<<5)  ; Ultra DMA mode 5 and below are supported
379A6_wUDMA_MODE4_SUPRTD   EQU (1<<4)  ; Ultra DMA mode 4 and below are supported
380A6_wUDMA_MODE3_SUPRTD   EQU (1<<3)  ; Ultra DMA mode 3 and below are supported
381A6_wUDMA_MODE2_SUPRTD   EQU (1<<2)  ; Ultra DMA mode 2 and below are supported
382A6_wUDMA_MODE1_SUPRTD   EQU (1<<1)  ; Ultra DMA mode 1 and below are supported
383A6_wUDMA_MODE0_SUPRTD   EQU (1<<0)  ; Ultra DMA mode 0 is supported
384
385; ATA-6 Word 93, Hardware reset result
386A6_wReset_CBLID_BELOW   EQU (1<<13) ; Device detected CBLID- above ViH
387A6_wReset_DEV1_PDIAG    EQU (1<<11) ; Device 1 asserted PDIAG-
388A6_wReset_DEV0_RESP_D1  EQU (1<<6)  ; Device 0 responds when Device 1 is selected
389A6_wReset_DEV0_DASP     EQU (1<<5)  ; Device 0 detected the assertion of DASP-
390A6_wReset_DEV0_PDIAG    EQU (1<<4)  ; Device 0 detected the assertion of PDIAG
391A6_wReset_DEV0_PASSED   EQU (1<<3)  ; Device 0 passed diagnostics
392A6_wReset_MASK_DEV1_DETERMINE   EQU ((1<<10)|(1<<9))    ; These bits indicate how Device 1 determined the device number
393A6_wReset_MASK_DEV0_DETERMINE   EQU ((1<<2)|(1<<1))     ; These bits indicate how Device 0 determined the device number:
394A6_wReset_RESERVED      EQU 00b
395A6_wReset_JUMPER        EQU 01b     ; a jumper was used
396A6_wReset_CSEL          EQU 10b     ; the CSEL signal was used
397A6_wReset_UNKNOWN       EQU 11b     ; some other method was used or the method is unknown
398
399; ATA-6 Word 127, Removable Media Status Notification feature set support
400A6_wRMSN_SUPPORTED      EQU (1<<0)  ; Removable Media Status Notification feature supported
401
402; ATA-6 Word 128, Security status
403A6_wSecurity_MAX        EQU (1<<8)  ; Security level 0 = High, 1 = Maximum
404A6_wSecurity_ENH_ERASE  EQU (1<<5)  ; Enhanced security erase supported
405A6_wSecurity_EXPIRED    EQU (1<<4)  ; Security count expired
406A6_wSecurity_FROZEN     EQU (1<<3)  ; Security frozen
407A6_wSecurity_LOCKED     EQU (1<<2)  ; Security locked
408A6_wSecurity_ENABLED    EQU (1<<1)  ; Security enabled
409A6_wSecurity_SUPPORTED  EQU (1<<0)  ; Security supported
410
411; ATA-6 Word 160, CFA Power Mode 1
412A6_wCFAPower_WORDSUPP   EQU (1<<15) ; Word 160 supported
413A6_wCFAPower_REQUIRED   EQU (1<<13) ; CFA power mode 1 is required for one or more commands implemented by the device
414A6_wCFAPower_DISABLED   EQU (1<<12) ; CFA power mode 1 disabled
415A6_wCFAPower_MASK_mA    EQU 0FFFh   ; Maximum current in mA
416
417
418%endif ; ATA_ID_INC
Note: See TracBrowser for help on using the repository browser.