Context Navigation

Strings.asm @ 588

Last change on this file since 588 was 588, checked in by krille_n_@…, 9 years ago

Changes:

Fixed a bug in AH24h_HSetBlocks.asm from r550. Trying to set a too large block size with an XT-CF card in DMA transfer mode would corrupt the stack.
Fixed a bug from r545 where the list of devices under g_szDeviceTypeValues in Strings.asm was no longer up to date causing the boot menu to display the wrong string for devices numbered higher than DEVICE_8BIT_XTCF_PIO8.
Made some fairly significant changes to the XT-CF code to reduce size. Two changes in functionality; 1) Added a simple check to validate the request for a change of the XT-CF transfer mode. 2) Changing transfer mode to use DMA no longer calls AH24h_SetBlockSize if the block size already is within the limits of DMA transfers. UNTESTED
XTIDECFG now clears IDEVARS.bIRQ when changing IDE controller to a serial device to keep the boot menu from displaying it since the serial device doesn't use IRQs at all.
Other minor optimizations.

File size: 28.3 KB

Rev	Line
[57]	1	; Project name : XTIDE Universal BIOS Configurator v2
	2	; Description : All strings.
	3
[376]	4	;
[380]	5	; XTIDE Universal BIOS and Associated Tools
[526]	6	; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
[376]	7	;
	8	; This program is free software; you can redistribute it and/or modify
	9	; it under the terms of the GNU General Public License as published by
	10	; the Free Software Foundation; either version 2 of the License, or
	11	; (at your option) any later version.
[380]	12	;
[376]	13	; This program is distributed in the hope that it will be useful,
	14	; but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
[380]	16	; GNU General Public License for more details.
[376]	17	; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
[380]	18	;
[376]	19
[57]	20	; Section containing initialized data
	21	SECTION .data
	22
	23	; Menu title
[532]	24	g_szProgramTitle: db "Configuration and Flashing program for XTIDE Universal BIOS v2.0.0.",LF,CR,NULL
[585]	25	g_szXtideUniversalBiosSignature: db "XTIDE205",NULL
[57]	26	g_szBiosIsNotLoaded: db "BIOS is not loaded!",NULL
	27	g_szEEPROM: db "EEPROM",NULL
	28	g_szSourceAndTypeSeparator: db " : ",NULL
	29	g_szUnidentified: db "Unidentified",NULL
[532]	30	g_szUnsaved: db " ",SINGLE_LEFT_HORIZONTAL_TO_VERTICAL,"Unsaved",SINGLE_RIGHT_HORIZONTAL_TO_VERTICAL,NULL
[108]	31
[57]	32	; Item formatting
	33	g_szFormatItemWithoutValue: db "%c%s",NULL
[59]	34	g_szFormatItemNameWithValue: db "%25s%-10S",NULL
[57]	35
	36
	37	g_szNo: db "No",NULL
[532]	38	g_szMultichoiceBooleanFlag: db "No",LF
[293]	39	g_szYes: db "Yes",NULL
[57]	40
[59]	41	; Exit messages
	42	g_szDlgExitToDos: db "Exit to DOS?",NULL
	43	g_szDlgSaveChanges: db "Do you want to save changes to XTIDE Universal BIOS image file?",NULL
[57]	44
[59]	45
[57]	46	; Generic dialog strings
	47	g_szNotificationDialog: db "Notification.",NULL
	48	g_szErrorDialog: db "Error!",NULL
	49	g_szGenericDialogInfo: db "Press ENTER or ESC to close dialog.",NULL
	50
[65]	51	; Flashing related strings
[109]	52	g_szFlashTitle: db "Flashing EEPROM, please wait.",NULL
[68]	53	g_szErrEepromTooSmall: db "Image is too large for selected EEPROM type!",NULL
[65]	54	g_szErrEepromPolling: db "Timeout when polling EEPROM.",LF
	55	db "EEPROM was not flashed properly!",NULL
	56	g_szErrEepromVerify: db "EEPROM did not return the same byte that was written.",LF
	57	db "EEPROM was not flashed properly!",NULL
[293]	58	g_szPCFlashSuccessful: db "EEPROM was written successfully.",LF
[65]	59	db "Press any key to reboot.",NULL
	60	g_szForeignFlash: db "EEPROM was written successfully.",NULL
[57]	61
[65]	62
[57]	63	; Strings for main menu
	64	g_szItemMainExitToDOS: db "Exit to DOS",NULL
	65	g_szItemMainLoadFile: db "Load BIOS from file",NULL
	66	g_szItemMainLoadROM: db "Load BIOS from EEPROM",NULL
	67	g_szItemMainLoadStngs: db "Load old settings from EEPROM",NULL
	68	g_szItemMainConfigure: db "Configure XTIDE Universal BIOS",NULL
	69	g_szItemMainFlash: db "Flash EEPROM",NULL
[380]	70	g_szItemMainSave: db "Save BIOS back to original file",NULL
[567]	71	g_szItemMainLicense: db "Copyright and License Information",NULL
	72	g_szItemMainHomePage: db "Web Links",NULL
[57]	73
	74	g_szDlgMainLoadROM: db "Successfully loaded XTIDE Universal BIOS from EEPROM.",NULL
	75	g_szDlgMainLoadStngs: db "Successfully loaded settings from EEPROM.",NULL
	76	g_szDlgMainLoadFile: db "Successfully loaded file for flashing.",NULL
	77	g_szDlgMainSaveFile: db "Successfully saved XTIDE Universal BIOS to file.",NULL
	78	g_szDlgMainFileTooBig: db "Selected file is too big to be loaded for flashing!",NULL
	79	g_szDlgMainLoadErr: db "Failed to load file!",NULL
	80	g_szDlgMainSaveErr: db "Failed to save file!",NULL
	81	g_szDlgFileTitle: db "Select file to be flashed.",NULL
	82	g_szDlgFileFilter: db ".",NULL
	83
	84	g_szNfoMainExitToDOS: db "Quits XTIDE Universal BIOS Configurator.",NULL
	85	g_szNfoMainLoadFile: db "Load BIOS file to be configured or flashed.",NULL
	86	g_szNfoMainLoadROM: db "Load BIOS from EEPROM to be reconfigured.",NULL
	87	g_szNfoMainLoadStngs: db "Load old XTIDE Universal BIOS settings from EEPROM.",NULL
	88	g_szNfoMainConfigure: db "Configure XTIDE Universal BIOS settings.",NULL
	89	g_szNfoMainFlash: db "Flash loaded BIOS image to EEPROM.",NULL
[371]	90	g_szNfoMainSave: db "Save BIOS changes back to original file from which it was loaded.",NULL
[526]	91	g_szNfoMainLicense: db "XTIDE Universal BIOS and XTIDECFG Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team."
[380]	92	db " Released under GNU GPL v2, with ABSOLUTELY NO WARRANTY. Press ENTER for more details...",NULL
[336]	93	g_szNfoMainHomePage: db "Visit http://code.google.com/p/ xtideuniversalbios (home page) and http://vintage-computer.com/ vcforum (support)",NULL
[57]	94
[532]	95	g_szHelpMainLicense: db "XTIDE Universal BIOS and XTIDECFG Configuration program are Copyright 2009-2010 by Tomi Tilli,"
	96	db " 2011-2013 by XTIDE Universal BIOS Team. Released under GNU GPL v2. This software comes with ABSOLUTELY NO WARRANTY."
	97	db " This is free software, and you are welcome to redistribute it under certain conditions."
	98	db " See the LICENSE.TXT file that was included with this distribution,"
	99	db " visit http://www.gnu.org/licenses/ gpl-2.0.html, or visit http://code.coogle.com/p/ xtideuniversalbios.",NULL
[57]	100
	101	; Strings for XTIDE Universal BIOS configuration menu
	102	g_szItemCfgBackToMain: db "Back to Main Menu",NULL
	103	g_szItemCfgIde1: db "Primary IDE Controller",NULL
	104	g_szItemCfgIde2: db "Secondary IDE Controller",NULL
	105	g_szItemCfgIde3: db "Tertiary IDE Controller",NULL
	106	g_szItemCfgIde4: db "Quaternary IDE Controller",NULL
[290]	107	g_szItemCfgBootMenu: db "Boot settings",NULL
[497]	108	g_szItemAutoConfigure: db "Auto Configure",NULL
[57]	109	g_szItemCfgFullMode: db "Full operating mode",NULL
	110	g_szItemCfgStealSize: db "kiB to steal from RAM",NULL
[59]	111	g_szItemCfgIdeCnt: db "IDE controllers",NULL
[380]	112	g_szItemCfgIdleTimeout: db "Power Management",NULL
[57]	113
[526]	114	g_szDlgAutoConfigure: db "Found "
[497]	115	g_bControllersDetected: db 'x' ; Value stored directly here
	116	db " controllers.",NULL
[57]	117	g_szDlgCfgFullMode: db "Enable full operating mode?",NULL
	118	g_szDlgCfgStealSize: db "How many kiB of base memory to steal for XTIDE Universal BIOS variables (1...255)?",NULL
[153]	119	g_szDlgCfgIdeCnt: db "How many IDE controllers to manage (1...4)?",NULL
[380]	120	g_szDlgCfgIdleTimeout: db "Select the amount of time before idling drives should enter standby mode.",NULL
[57]	121
	122	g_szNfoCfgIde: db "IDE controller and drive configuration.",NULL
[290]	123	g_szNfoCfgBootMenu: db "Boot configuration.",NULL
[497]	124	g_szNfoAutoConfigure: db "Automatically Configure XTIDE Universal BIOS for this system.",NULL
[57]	125	g_szNfoCfgFullMode: db "Full mode supports multiple controllers and has more features.",NULL
[59]	126	g_szNfoCfgStealSize: db "How many kiB's to steal from Conventional memory for XTIDE Universal BIOS variables.",NULL
[57]	127	g_szNfoCfgIdeCnt: db "Number of IDE controllers to manage.",NULL
[380]	128	g_szNfoCfgIdleTimeout: db "Enable Power Management to set the harddrive(s) to spin down after idling a certain amount of time.",NULL
[57]	129
[567]	130	g_szSerialMoved: db "A Serial Controller has been moved to the end of the Controller list."
[380]	131	db " No further action is required. Serial Controllers must be placed at the end of the list.",NULL
[258]	132
[532]	133	g_szHelpCfgFullMode: db "Full mode supports up to 4 IDE controllers (8 drives). Full mode reserves a bit of RAM from the top of"
	134	db " Conventional memory. This makes it possible to use ROM BASIC and other software that requires"
	135	db " the interrupt vectors where XTIDE Universal BIOS parameters would be stored in Lite mode.",LF,LF
	136	db "Lite mode supports only one IDE controller (2 drives) and stores parameters to the top of the interrupt vectors"
	137	db " (30:0h) so no Conventional memory needs to be reserved. Lite mode cannot be used if some software requires"
	138	db " the top of interrupt vectors. Usually this is not a problem since only IBM ROM BASIC uses them.",LF,LF
	139	db "Tandy 1000 models with 640 kiB or less memory need to use Lite mode since the top of Conventional memory gets"
	140	db " dynamically reserved by video hardware. This happens only with Tandy integrated video controller and not when"
	141	db " using expansion graphics cards. It is possible to use Full mode if reserving RAM for video memory + what is"
	142	db " required for XTIDE Universal BIOS. This would mean 65 kiB but most software should work with 33 kiB reserved.",NULL
	143
	144	g_szHelpCfgStealSize: db "Parameters for detected hard disks must be stored somewhere. In Full mode they are stored at the top of Conventional"
	145	db " memory. 1 kiB is usually enough but you may have to reserve more if you want to use Full mode on a Tandy 1000.",NULL
	146
[380]	147	g_szHelpCfgIdleTimeout: db "This option enables the standby timer for all harddrives handled by XTIDE Universal BIOS,"
	148	db " allowing the drives to spin down after idling the selected amount of time."
	149	db " Note that this does not work with old drives that lack the Power Management feature set."
	150	db " Also note that timeouts less than 5 minutes may cause unnecessary wear on the drives and is not recommended"
	151	db " (use for compatibility testing only).",NULL
[532]	152
	153	g_szMultichoiceIdleTimeout: db "Disabled",LF
[380]	154	db "1 m",LF
	155	db "2 m",LF
	156	db "3 m",LF
	157	db "4 m",LF
	158	db "5 m",LF
	159	db "6 m",LF
	160	db "7 m",LF
	161	db "8 m",LF
	162	db "9 m",LF
	163	db "10 m",LF
	164	db "11 m",LF
	165	db "12 m",LF
	166	db "13 m",LF
	167	db "14 m",LF
	168	db "15 m",LF
	169	db "16 m",LF
	170	db "17 m",LF
	171	db "18 m",LF
	172	db "19 m",LF
	173	db "20 m",LF
	174	db "30 m",LF
	175	db "1 h",LF
	176	db "1 h 30 m",LF
	177	g_szIdleTimeoutChoice24: db "2 h",NULL
[532]	178	g_szIdleTimeoutChoice23: db "1 h 30 m",NULL
	179	g_szIdleTimeoutChoice22: db "1 h",NULL
	180	g_szIdleTimeoutChoice21: db "30 m",NULL
	181	g_szIdleTimeoutChoice20: db "20 m",NULL
	182	g_szIdleTimeoutChoice19: db "19 m",NULL
	183	g_szIdleTimeoutChoice18: db "18 m",NULL
	184	g_szIdleTimeoutChoice17: db "17 m",NULL
	185	g_szIdleTimeoutChoice16: db "16 m",NULL
	186	g_szIdleTimeoutChoice15: db "15 m",NULL
	187	g_szIdleTimeoutChoice14: db "14 m",NULL
	188	g_szIdleTimeoutChoice13: db "13 m",NULL
	189	g_szIdleTimeoutChoice12: db "12 m",NULL
	190	g_szIdleTimeoutChoice11: db "11 m",NULL
	191	g_szIdleTimeoutChoice10: db "10 m",NULL
	192	g_szIdleTimeoutChoice9: db "9 m",NULL
	193	g_szIdleTimeoutChoice8: db "8 m",NULL
	194	g_szIdleTimeoutChoice7: db "7 m",NULL
	195	g_szIdleTimeoutChoice6: db "6 m",NULL
	196	g_szIdleTimeoutChoice5: db "5 m",NULL
	197	g_szIdleTimeoutChoice4: db "4 m",NULL
	198	g_szIdleTimeoutChoice3: db "3 m",NULL
	199	g_szIdleTimeoutChoice2: db "2 m",NULL
	200	g_szIdleTimeoutChoice1: db "1 m",NULL
[380]	201	g_szIdleTimeoutChoice0: db "Disabled",NULL
	202
[57]	203	; Strings for IDE Controller menu
[532]	204	g_szItemBackToCfgMenu: db "Back to Configuration Menu",NULL
	205	g_szItemIdeMaster: db "Master Drive",NULL
	206	g_szItemIdeSlave: db "Slave Drive",NULL
	207	g_szItemIdeDevice: db "Device type",NULL
	208	g_szItemIdeCmdPort: db "Base (cmd block) address",NULL
	209	g_szItemIdeCtrlPort: db "Control block address",NULL
	210	g_szItemIdeEnIRQ: db "Enable interrupt",NULL
	211	g_szItemIdeIRQ: db "IRQ",NULL
	212	g_szItemSerialCOM: db "COM Port",NULL
	213	g_szItemSerialBaud: db "Baud Rate",NULL
	214	g_szItemSerialPort: db "COM Port I/O address",NULL
[380]	215	g_szItemIdeSerialComPort: db "COM port",NULL
	216	g_szItemIdeSerialBaudRate: db "Baud rate",NULL
[199]	217
[532]	218	g_szDlgDevice: db "Select controller type.",NULL
	219	g_szDlgIdeCmdPort: db "Enter IDE command block (base port) address.",NULL
	220	g_szDlgIdeCtrlPort: db "Enter IDE control block address (usually command block + 200h).",NULL
	221	g_szDlgIdeEnIRQ: db "Enable interrupt?",NULL
	222	g_szDlgIdeIRQ: db "Enter IRQ channel (2...7 for 8-bit controllers, 2...15 for any other controller).",NULL
[242]	223
[532]	224	g_szNfoIdeBackToCfgMenu: db "Back to XTIDE Universal BIOS Configuration Menu.",NULL
	225	g_szNfoIdeMaster: db "Settings for Master Drive.",NULL
	226	g_szNfoIdeSlave: db "Settings for Slave Drive.",NULL
	227	g_szNfoIdeDevice: db "Select controller device type.",NULL
[536]	228	g_szNfoIdeCmdPort: db "IDE Controller Command Block (base port) address or segment address for JR-IDE/ISA and SVC ADP50L.",NULL
[532]	229	g_szNfoIdeCtrlPort: db "IDE Controller Control Block address. Usually Cmd Block + 8 for XTIDE, and Cmd Block + 200h for ATA.",NULL
	230	g_szNfoIdeEnIRQ: db "Interrupt or polling mode.",NULL
	231	g_szNfoIdeIRQ: db "IRQ channel to use.",NULL
	232	g_szNfoIdeSerialCOM: db "Select a COM port by number.",NULL
	233	g_szNfoIdeSerialBaud: db "Select the COM port's Baud Rate. The server must match this speed."
	234	db " Note that UART clock multipliers may impact the actual speed.",NULL
	235	g_szNfoIdeSerialPort: db "Select a COM port by custom I/O port address. Any address is valid up to 3F8h, but must be on an 8-byte boundary.",NULL
[57]	236
[532]	237	g_szHelpIdeCmdPort: db "IDE controller command block address is the usual address mentioned for IDE controllers."
	238	db " By default the primary IDE controller uses port 1F0h and secondary controller uses port 170h."
	239	db " XTIDE card uses port 300h by default."
[536]	240	db " JR-IDE/ISA and SVC ADP50L do not use ports but needs the ROM segment address set here instead.",NULL
[57]	241
[532]	242	g_szHelpIdeCtrlPort: db "IDE controller Control Block address is normally Command Block address + 200h."
	243	db " For XTIDE card the Control Block registers are mapped right after Command Block"
	244	db " registers so use Command Block address + 8h for XTIDE card.",NULL
[57]	245
[532]	246	g_szHelpIdeEnIRQ: db "IDE controller can use interrupts to signal when it is ready to transfer data."
	247	db " This makes possible to do other tasks while waiting drive to be ready."
	248	db " That is usually not useful in MS-DOS but using interrupts frees the bus for any DMA transfers."
	249	db " Polling mode is used when interrupts are disabled."
	250	db " Polling usually gives a little better access times since interrupt handling requires extra processing."
	251	db " There can be some compatibility issues with some old drives when polling is used with Block Mode transfers.",NULL
	252
	253	g_szHelpIdeIRQ: db "IRQ channel to use. All controllers managed by XTIDE Universal BIOS can use the same IRQ when MS-DOS is used."
	254	db " Other operating systems are likely to require different interrupts for each controller.",NULL
	255
	256	g_szHelpIdeSerialCOM: db "Select a serial port by COM port number. COM1 through COM4 have well established I/O port assignments,"
	257	db ' COM5 and onward are less well established. "COMA" represents COM10, "COMB" represents COM11, and "COMC"'
	258	db ' represents COM12. Selecting "COMx" enables the manual selection of an I/O port address.',NULL
	259
	260	g_szHelpIdeSerialPort: db "Select a serial port by I/O address. Any port address is supported up to 3F8h, but must be on an 8-byte boundary."
	261	db " If the entered value corresponds to one of the established COM port numbers, then the selection will snap"
	262	db ' to that COM port and "COMx" must be selected again for custom I/O address entry.',NULL
	263
	264	g_szHelpIdeSerialBaud: db "Supported baud rates are 2400, 4800, 9600, 19.2K, 28.8K, 38.4K, 57.6K, and 115.2K. The server must also be set to"
	265	db " this same speed. Older UARTs may only support up to 9600 baud, but sometimes can be pushed to 38.4K. 115.2K will"
	266	db " likely only be possible with a newer UART that includes a FIFO. Some high speed serial ports include UART clock"
	267	db " multipliers, allowing for speeds at 230.4K (2x multiplier) and 460.8K (4x multiplier) above 115.2K. These high"
	268	db " speeds are supported by these BIOS, even on original 4.77MHz 8088 systems. Note that UART clock multipliers are"
	269	db " not detectable by the software and 115.2K will still be used during configuration for high speeds; but if"
	270	db " a multiplier is used, the actual speed (including the multiplier) will need to be used by the server.",NULL
	271
	272	g_szMultichoiceCfgDevice: db "16-bit ISA/VLB/PCI IDE",LF
	273	db "32-bit VLB/PCI IDE",LF
	274	db "16-bit ISA IDE in 8-bit mode",LF
	275	db "XTIDE rev 1",LF
	276	db "XTIDE rev 2 or modded rev 1",LF
[588]	277	db "XT-CF (PIO8)",LF
[585]	278	db "XT-CF (PIO8 w/BIU offload)",LF
	279	db "XT-CF (PIO16 w/BIU offload)",LF
[546]	280	db "XT-CF DMA (v3 only)",LF
[532]	281	db "JR-IDE/ISA",LF
[536]	282	db "SVC ADP50L",LF
[532]	283	db "Serial port virtual device",NULL
	284
[558]	285	g_szValueCfgDevice16b: db "16-bit",NULL
	286	g_szValueCfgDevice32b: db "32-bit",NULL
	287	g_szValueCfgDevice8b: db "8-bit",NULL
	288	g_szValueCfgDeviceRev1: db "XTIDE r1",NULL
	289	g_szValueCfgDeviceRev2: db "XTIDE r2",NULL
	290	g_szValueCfgDeviceXTCFPio8: db "XTCF PIO",NULL
[585]	291	g_szValueCfgDeviceXTCFPio8WithBIUOffload: db "BIU 8",NULL
	292	g_szValueCfgDeviceXTCFPio16WithBIUOffload: db "BIU 16",NULL
[558]	293	g_szValueCfgDeviceXTCFDMA: db "XTCF DMA",NULL
	294	g_szValueCfgDeviceJrIdeIsa: db "JR-ISA",NULL
	295	g_szValueCfgDeviceADP50L: db "ADP50L",NULL
	296	g_szValueCfgDeviceSerial: db "Serial",NULL
[403]	297
[567]	298	g_szSerialCOMChoice: db "COM1 - address 3F8h",LF
[532]	299	db "COM2 - address 2F8h",LF
[567]	300	db "COM3 - address 3E8h",LF
	301	db "COM4 - address 2E8h",LF
	302	db "COM5 - address 2F0h",LF
	303	db "COM6 - address 3E0h",LF
[532]	304	db "COM7 - address 2E0h",LF
[233]	305	db "COM8 - address 260h",LF
	306	db "COM9 - address 368h",LF
	307	db "COMA - address 268h",LF
	308	db "COMB - address 360h",LF
	309	db "COMC - address 270h",LF
[567]	310	db "COMx - Custom address",NULL
[199]	311
[532]	312	g_szValueCfgCOM1: db "COM1",NULL
	313	g_szValueCfgCOM2: db "COM2",NULL
	314	g_szValueCfgCOM3: db "COM3",NULL
	315	g_szValueCfgCOM4: db "COM4",NULL
	316	g_szValueCfgCOM5: db "COM5",NULL
	317	g_szValueCfgCOM6: db "COM6",NULL
	318	g_szValueCfgCOM7: db "COM7",NULL
	319	g_szValueCfgCOM8: db "COM8",NULL
	320	g_szValueCfgCOM9: db "COM9",NULL
	321	g_szValueCfgCOMA: db "COMA",NULL
	322	g_szValueCfgCOMB: db "COMB",NULL
	323	g_szValueCfgCOMC: db "COMC",NULL
	324	g_szValueCfgCOMx: db "Custom",NULL
[242]	325
[567]	326	g_szSerialBaudChoice: db "115.2K baud",LF
	327	db "57.6K baud",LF
[233]	328	db "38.4K baud",LF
[567]	329	db "28.8K baud",LF
	330	db "19.2K baud",LF
[199]	331	db "9600 baud",LF
[567]	332	db "4800 baud",LF
	333	db "2400 baud",NULL
[199]	334
[532]	335	g_szValueCfgBaud115_2: db "115.2K",NULL
	336	g_szValueCfgBaud57_6: db "57.6K",NULL
	337	g_szValueCfgBaud38_4: db "38.4K",NULL
	338	g_szValueCfgBaud28_8: db "28.8K",NULL
	339	g_szValueCfgBaud19_2: db "19.2K",NULL
	340	g_szValueCfgBaud9600: db "9600",NULL
	341	g_szValueCfgBaud4800: db "4800",NULL
	342	g_szValueCfgBaud2400: db "2400",NULL
[233]	343
[242]	344
[57]	345	; Strings for DRVPARAMS menu
	346	g_szItemDrvBackToIde: db "Back to IDE Controller Menu",NULL
	347	g_szItemDrvBlockMode: db "Block Mode Transfers",NULL
[425]	348	g_szItemDrvXlateMode: db "CHS translation method",NULL
[286]	349	g_szItemDrvWriteCache: db "Internal Write Cache",NULL
[57]	350	g_szItemDrvUserCHS: db "User specified CHS",NULL
	351	g_szItemDrvCyls: db "Cylinders",NULL
	352	g_szItemDrvHeads: db "Heads",NULL
	353	g_szItemDrvSect: db "Sectors per track",NULL
[286]	354	g_szItemDrvUserLBA: db "User specified LBA",NULL
	355	g_szItemDrvLbaSectors: db "Millions of sectors",NULL
[57]	356
	357	g_szDlgDrvBlockMode: db "Enable Block Mode Transfers?",NULL
[425]	358	g_szDlgDrvXlateMode: db "Select P-CHS to L-CHS translation method.",NULL
[286]	359	g_szDlgDrvWriteCache: db "Select hard drive internal write cache settings.",NULL
[57]	360	g_szDlgDrvUserCHS: db "Specify (P-)CHS parameters manually?",NULL
	361	g_szDlgDrvCyls: db "Enter number of P-CHS cylinders (1...16383).",NULL
	362	g_szDlgDrvHeads: db "Enter number of P-CHS heads (1...16).",NULL
	363	g_szDlgDrvSect: db "Enter number of sectors per track (1...63).",NULL
[286]	364	g_szDlgDrvUserLBA: db "Limit drive capacity?",NULL
[425]	365	g_szDlgDrvLbaSectors: db "Enter maximum capacity in millions of sectors (16...256).",NULL
[57]	366
	367	g_szNfoDrvBlockMode: db "Transfer multiple sectors per data request.",NULL
[425]	368	g_szNfoDrvXlateMode: db "P-CHS to L-CHS translation method.",NULL
[286]	369	g_szNfoDrvWriteCache: db "Hard Drive Internal Write Cache settings (WARNING!).",NULL
[59]	370	g_szNfoDrvUserCHS: db "Specify (P-)CHS parameters manually instead of autodetecting them.",NULL
[57]	371	g_szNfoDrvCyls: db "Number of user specified P-CHS cylinders.",NULL
	372	g_szNfoDrvHeads: db "Number of user specified P-CHS heads.",NULL
	373	g_szNfoDrvSect: db "Number of user specified P-CHS sectors per track.",NULL
[546]	374	g_szNfoDrvUserLBA: db "Limit drive capacity to fix compatibility problems with Windows 9x.",NULL
	375	g_szNfoDrvLbaSectors: db "Millions of sectors (1024*1024). 1M sectors = 512 MiB. Recommended limits are 64 for Windows 95, 128 for Windows 98 and 256 for Windows ME (and 98 with updated fdisk).",NULL
[57]	376
[532]	377	g_szHelpDrvBlockMode: db "Block Mode will speed up transfers since multiple sectors can be transferred before waiting next data request."
	378	db " Normally Block Mode should always be kept enabled but there is at"
	379	db " least one drive with buggy Block Mode implementation.",NULL
[380]	380
[567]	381	g_szHelpDrvWriteCache: db "Modern Hard Drives have a large amount of internal write cache."
	382	db " The cache will speed up writes since the drive can free the bus right after data has been written to cache."
	383	db " The drive then starts to write the data from cache to disk by itself."
	384	db " This can be dangerous since all unwritten data in cache is lost if power is turned off or the system is reset."
[532]	385	db " Modern operating systems will flush the cache when user shuts down the system."
	386	db " DOS does not have that sort of protection so it is up to the user to make sure cache is flushed."
	387	db " WARNING!!! Write cache should be left disabled.",NULL
	388
	389	g_szHelpDrvUserCHS: db "Specify (P-)CHS parameters manually instead of autodetecting them."
	390	db " This can be used to limit drive size for old operating systems that do not support large hard disks."
	391	db " Some early IDE drives have buggy autodetection so they require CHS to be specified manually."
	392	db " Limiting Cylinders will work for all drives but drives may not accept all values for Heads and Sectors per Track.",NULL
	393
	394	g_szHelpDrvUserLBA: db "Limit drive size to X million sectors for EBIOS functions. This option is useful to"
	395	db " prevent large drive compatibility problems with MS-DOS 7.x (Windows 95 and 98).",NULL
	396
[425]	397	g_szMultichoiseXlateMode:
	398	db "NORMAL",LF
	399	db "LARGE",LF
	400	db "Assisted LBA",LF
	401	db "Autodetect",NULL
	402
	403	g_szValueDrvXlateNormal:db "NORMAL",NULL
	404	g_szValueDrvXlateLarge: db "LARGE",NULL
	405	g_szValueDrvXlateLBA: db "LBA",NULL
	406	g_szValueDrvXlateAuto: db "Auto",NULL
	407
[286]	408	g_szMultichoiseWrCache: db "Drive Default",LF
	409	db "Disable Write Cache",LF
	410	db "Enable Write Cache",NULL
[57]	411
[286]	412	g_szValueDrvWrCaDis: db "Disabled",NULL
	413	g_szValueDrvWrCaEn: db "Enabled",NULL
[57]	414
[286]	415
[290]	416	; Strings for boot settings menu
[57]	417	g_szItemBootTimeout: db "Selection timeout",NULL
	418	g_szItemBootDrive: db "Default boot drive",NULL
[144]	419	g_szItemBootDispMode: db "Display Mode",NULL
[59]	420	g_szItemBootFloppyDrvs: db "Number of Floppy Drives",NULL
[199]	421	g_szItemSerialDetect: db "Scan for Serial Drives",NULL
[57]	422
[290]	423	g_szDlgBootTimeout: db "Enter Boot Menu selection timeout in BIOS timer ticks (2...1092).",NULL
[403]	424	g_szDlgBootDrive: db "Enter default drive number (0xh for Floppy Drives, 8xh for Hard Disks).",NULL
	425	g_szDlgBootDispMode: db "Select display mode.",NULL
	426	g_szDlgBootFloppyDrvs: db "Select number of Floppy Drives in system.",NULL
[199]	427	g_szDlgSerialDetect: db "Scan for serial drives?",NULL
[242]	428
[290]	429	g_szNfoBootTimeout: db "Menu item selection timeout in BIOS timer ticks. 1 tick = 54.9 ms.",NULL
[459]	430	g_szNfoBootDrive: db "Default boot drive.",NULL
[403]	431	g_szNfoDispMode: db "Display mode to set when booting.",NULL
	432	g_szNfoBootFloppyDrvs: db "Number of Floppy Drives in system.",NULL
[380]	433	g_szNfoSerialDetect: db "Scans all standard COM ports for serial drives."
	434	db " This can also be invoked by holding down ALT at the end of normal drive detection.",NULL
[57]	435
[532]	436	g_szHelpBootTimeout: db "Boot Menu selection timeout in BIOS timer ticks (1 second = 18.2 ticks)."
	437	db " When timer goes to zero, currently selected drive will be booted automatically."
	438	db " Timeout can be disabled by setting this to 0.",NULL
[57]	439
[532]	440	g_szHelpBootDrive: db "Drive to be set selected by default when Boot Menu is displayed.",NULL
[144]	441
[532]	442	g_szHelpBootFloppyDrvs: db "Detecting the correct number of floppy drives might fail when using a floppy controller with its own BIOS."
	443	db " A minimum number of floppy drives can be specified to force non-detected drives to appear on boot menu.",NULL
[57]	444
[532]	445	g_szHelpSerialDetect: db "Set to Yes, at the end of normal drive detection, COM ports 1-7 (in reverse order) will be scanned for a connection"
	446	db " to a serial drive server. This option provides flexibility with the COM port and baud rate to be used,"
	447	db " it need not be configured ahead of time, but at the expense of a slower boot process."
	448	db " Even when this option is set to No, this functionality can still be invoked by holding down the ALT key at the end"
	449	db " of normal drive detection. Note that if any serial drives are detected during the normal drive detection,"
	450	db " no scan will take place (to avoid finding the same drive twice).",NULL
	451
	452	g_szMultichoiceBootDispMode: db "Default",LF
	453	db "40x25 Black & White",LF
	454	db "40x25 Color",LF
	455	db "80x25 Black & White",LF
	456	db "80x25 Color",LF
	457	db "80x25 Monochrome",NULL
	458
[144]	459	g_szValueBootDispModeDefault: db "Default",NULL
	460	g_szValueBootDispModeBW40: db "BW40",NULL
	461	g_szValueBootDispModeCO40: db "CO40",NULL
	462	g_szValueBootDispModeBW80: db "BW80",NULL
	463	g_szValueBootDispModeCO80: db "CO80",NULL
	464	g_szValueBootDispModeMono: db "Mono",NULL
	465
[532]	466	g_szMultichoiceBootFloppyDrvs: db "Autodetect",LF
	467	db "1",LF
	468	db "2",LF
	469	db "3",LF
	470	g_szValueBootFloppyDrvs4: db "4",NULL
	471	g_szValueBootFloppyDrvs3: db "3",NULL
	472	g_szValueBootFloppyDrvs2: db "2",NULL
	473	g_szValueBootFloppyDrvs1: db "1",NULL
[59]	474	g_szValueBootFloppyDrvsAuto: db "Auto",NULL
	475
	476
[57]	477	; Strings for Flash menu
	478	g_szItemFlashStart: db "Start flashing",NULL
[59]	479	g_szItemFlashEepromType:db "EEPROM type",NULL
[57]	480	g_szItemFlashSDP: db "SDP command",NULL
	481	g_szItemFlashAddr: db "EEPROM address",NULL
	482	g_szItemFlashPageSize: db "Page size",NULL
	483	g_szItemFlashChecksum: db "Generate checksum byte",NULL
	484
[59]	485	g_szDlgFlashEepromType: db "Select EEPROM type.",NULL
	486	g_szDlgFlashSDP: db "Select Software Data Protection command.",NULL
[57]	487	g_szDlgFlashAddr: db "Enter segment address where EEPROM is located.",NULL
[59]	488	g_szDlgFlashPageSize: db "Select write page size.",NULL
[57]	489	g_szDlgFlashChecksum: db "Generate checksum byte to the end of BIOS image?",NULL
	490
[59]	491	g_szNfoFlashEepromType: db "EEPROM type.",NULL
[57]	492	g_szNfoFlashStart: db "Writes BIOS to EEPROM.",NULL
	493	g_szNfoFlashSDP: db "Software Data Protection command.",NULL
	494	g_szNfoFlashAddr: db "Address (segment) where EEPROM is located.",NULL
	495	g_szNfoFlashPageSize: db "Number of bytes to write before delay.",NULL
	496	g_szNfoFlashChecksum: db "Generate checksum byte to the end of BIOS image.",NULL
	497
[532]	498	g_szHelpFlashSDP: db "Software Data Protection Command:",LF
	499	db "None = Do not use Software Data Protection. Meant for EEPROMs that do not support SDP.",LF,LF
	500	db "Enable = Write protects the EEPROM after flashing."
	501	db " Software Data Protection should always be enabled if EEPROM supports it.",LF,LF
	502	db "Disable = Disables Software Data Protection after flashing.",NULL
[57]	503
[532]	504	g_szHelpFlashPageSize: db "Larger page size will improve write performance but not all EEPROMs support large pages or page writing at all."
	505	db " Byte writing mode will be used when page size is set to 1. Byte writing mode is supported by all EEPROMs."
	506	db " Large pages cannot be flashed with slow CPUs.",NULL
	507
	508	g_szHelpFlashChecksum: db "PC BIOSes require a checksum byte at the end of expansion card BIOS ROMs."
	509	db " You might not want to generate checksum byte when flashing some other images than XTIDE Universal BIOS.",NULL
	510
[108]	511	g_szMultichoiceEepromType:
[59]	512	db "2816 (2 kiB)",LF
	513	db "2864 (8 kiB)",LF
[159]	514	db "2864 mod (8 kiB)",LF
[59]	515	db "28256 (32 kiB)",LF
	516	db "28512 (64 kiB)",NULL
	517	g_szValueFlash2816: db "2816",NULL
	518	g_szValueFlash2864: db "2864",NULL
[159]	519	g_szValueFlash2864Mod: db "2864mod",NULL
[59]	520	g_szValueFlash28256: db "28256",NULL
	521	g_szValueFlash28512: db "28512",NULL
[57]	522
[108]	523	g_szMultichoiceSdpCommand:
[59]	524	db "None",LF
	525	db "Enable",LF
[293]	526	g_szValueFlashDisable: db "Disable",NULL
[532]	527	g_szValueFlashEnable: db "Enable",NULL
[59]	528	g_szValueFlashNone: db "None",NULL
[57]	529
[108]	530	g_szMultichoicePageSize:
[59]	531	db "1 byte",LF
	532	db "2 bytes",LF
	533	db "4 bytes",LF
	534	db "8 bytes",LF
	535	db "16 bytes",LF
	536	db "32 bytes",LF
[293]	537	g_szValueFlash64bytes: db "64 bytes",NULL
[532]	538	g_szValueFlash32bytes: db "32 bytes",NULL
	539	g_szValueFlash16bytes: db "16 bytes",NULL
	540	g_szValueFlash8bytes: db "8 bytes",NULL
	541	g_szValueFlash4bytes: db "4 bytes",NULL
	542	g_szValueFlash2bytes: db "2 bytes",NULL
[65]	543	g_szValueFlash1byte: db "1 byte",NULL
[185]	544
[380]	545	g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2u s",NULL
	546	g_szDashForZero: db "- ",NULL
[233]	547	g_szValueUnknownError: db "Error!",NULL
	548

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Strings.asm @ 588

Download in other formats: