source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Main.asm @ 589

Last change on this file since 589 was 589, checked in by krille_n_, 8 years ago

Changes:

  • BIOS: Fixed a purely cosmetic bug from r542 where, in builds containing MODULE_EBIOS, the boot menu would display an incorrect drive size (0.4 kB with MODULE_STRINGS_COMPRESSED or 0.5 kB without) for old drives with no support for LBA.
  • Fixed a bug from r392 where Vision_DetectAndReturnIDinAXandPortInDXifControllerPresent would return the ID in AL instead of AH (if DANGEROUS_DETECTION had been defined).
  • Fixed a bug from r587 in AdvAtaInit.asm that would prevent detection of QDI Vision controllers.
  • Also changed how the QDI Vision IDs are defined (removed the need for shifting) to avoid confusion. This fixed a potential bug from r587 in AdvAtaInit.asm where some IDs were not being shifted.
  • Fixed a bug in PDC20x30.asm from r587 where GetPdcIDtoAX would not return with the IDE base port in DX so DisablePdcProgrammingMode would fail.
  • Made some changes to ModuleDependency.inc and other files so that MODULE_ADVANCED_ATA now requires USE_386. Consequently it is no longer included in the regular AT-builds, only in the 386_8k-build.
  • Moved the UNROLL_SECTORS_IN_CX_TO_xWORDS macros from IDE_8bit.inc to IdeIO.inc which means it's now possible to build a BIOS without MODULE_8BIT_IDE.
  • XTIDECFG: Added a minimum DOS version check (since it needs DOS version 2+) to allow the program to quit gracefully in the unlikely scenario where someone tries to run it under DOS version 1.
  • Made some changes to Drive.asm to improve drive enumeration. The old method using GET_DOS_DRIVE_PARAMETER_BLOCK_FOR_SPECIFIC_DRIVE worked well in Windows XP but not in Windows 98 SE (in Windows or in DOS mode). The two problems were; 1) The function call would access the drives which on single floppy drive systems would cause Windows to swap between A: and B: (throwing a blue screen asking the user to insert a disk etc). 2) Only floppy drives and FAT16 drives would be available in the list of drives, no FAT32/optical/network drives.
  • Improved code in IdeControllerMenu.asm so that the default port addresses for all IDE interfaces are now restored when (re-)selecting the (same) type of IDE device.
  • Also made it impossible to select a device type unless the required module is included in the loaded BIOS.
  • The version check done when loading a BIOS now uses the FLASH_SIGNATURE definition from Version.inc. Any changes affecting RomVars now only requires updating that definition. This means that changes to RomVars must be implemented in both the BIOS and XTIDECFG before being committed to the repository.
  • Added a compatibility fix for 3Com 3C503 cards to the ROM checksumming code in Buffers.asm (Buffers_GenerateChecksum).
  • SerDrive: Made some minor changes to file names and paths to improve compatibility with case sensitive environments.
  • BIOSDRVS: Made a minor size optimization which as a side effect also makes it compatible with all DOS versions including DOS version 1.
  • Library: Renamed the WAIT_RETRACE_IF_NECESSARY_THEN macro to CALL_WAIT_FOR_RETRACE_IF_NECESSARY_THEN and made a tail-call-optimized version of it (JMP_WAIT_FOR_RETRACE_IF_NECESSARY_THEN).
  • A speed optimization to the eRCL_IM macro for 386 and higher. This change breaks emulation in the sense that the macro will fail when given a memory operand as the first parameter.
  • Other minor optimizations and fixes.
File size: 4.3 KB
Line 
1; Project name  :   XTIDE Universal BIOS Configurator v2
2; Description   :   Program start and exit.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Include .inc files
21
22%define INCLUDE_MENU_DIALOGS
23%define INCLUDE_SERIAL_LIBRARY
24
25%include "AssemblyLibrary.inc"  ; Assembly Library. Must be included first!
26%include "RomVars.inc"          ; XTIDE Universal BIOS variables
27%include "IdeRegisters.inc"     ; Needed for port and device autodetection
28%include "JRIDE_ISA.inc"        ; For JR-IDE/ISA default segment
29%include "ADP50L.inc"           ; For ADP50L default segment
30%include "XTCF.inc"             ; For XT-CF modes
31
32%include "Version.inc"
33%include "MenuCfg.inc"
34%include "MenuStructs.inc"
35%include "Variables.inc"
36
37
38; Section containing code
39SECTION .text
40
41
42; Program first instruction.
43ORG 100h                        ; Code starts at offset 100h (DOS .COM)
44Start:
45    jmp     Main_Start
46
47; Include library sources
48%include "AssemblyLibrary.asm"
49
50; Include sources for this program
51%include "AutoConfigure.asm"
52%include "BiosFile.asm"
53%include "Buffers.asm"
54%include "Dialogs.asm"
55%include "EEPROM.asm"
56%include "Flash.asm"
57%include "IdeAutodetect.asm"
58%include "MenuEvents.asm"
59%include "Menuitem.asm"
60%include "MenuitemPrint.asm"
61%include "Menupage.asm"
62%include "Strings.asm"
63
64%include "BootMenuSettingsMenu.asm"
65%include "ConfigurationMenu.asm"
66%include "FlashMenu.asm"
67%include "IdeControllerMenu.asm"
68%include "MainMenu.asm"
69%include "MasterSlaveMenu.asm"
70
71
72
73;--------------------------------------------------------------------
74; Program start
75;--------------------------------------------------------------------
76ALIGN JUMP_ALIGN
77Main_Start:
78    mov     ah, GET_DOS_VERSION
79    int     DOS_INTERRUPT_21h
80    cmp     al, 2
81    jae     SHORT .DosVersionIsOK
82    mov     dx, g_s$NotMinimumDosVersion
83    mov     ah, WRITE_STRING_TO_STANDARD_OUTPUT
84    int     DOS_INTERRUPT_21h
85    ret
86.DosVersionIsOK:
87
88    mov     ax, SCREEN_BACKGROUND_CHARACTER_AND_ATTRIBUTE
89    call    InitializeScreenWithBackgroundCharAndAttrInAX
90
91    call    Main_InitializeCfgVars
92    call    MenuEvents_DisplayMenu
93    mov     ax, DOS_BACKGROUND_CHARACTER_AND_ATTRIBUTE
94    call    InitializeScreenWithBackgroundCharAndAttrInAX
95
96    ; Exit to DOS
97    mov     ax, TERMINATE_WITH_RETURN_CODE<<8       ; Errorlevel 0 in AL
98    int     DOS_INTERRUPT_21h
99
100
101;--------------------------------------------------------------------
102; InitializeScreenWithBackgroundCharAndAttrInAX
103;   Parameters:
104;       AL:     Background character
105;       AH:     Background attribute
106;   Returns:
107;       Nothing
108;   Corrupts registers:
109;       AX, DX, DI
110;--------------------------------------------------------------------
111ALIGN JUMP_ALIGN
112InitializeScreenWithBackgroundCharAndAttrInAX:
113    xchg    dx, ax
114    CALL_DISPLAY_LIBRARY InitializeDisplayContext   ; Reset cursor etc
115    xchg    ax, dx
116    JMP_DISPLAY_LIBRARY ClearScreenWithCharInALandAttrInAH
117
118
119;--------------------------------------------------------------------
120; Main_InitializeCfgVars
121;   Parameters:
122;       DS:     Segment to CFGVARS
123;   Returns:
124;       Nothing
125;   Corrupts registers:
126;       AX, BX, CX, DI
127;--------------------------------------------------------------------
128ALIGN JUMP_ALIGN
129Main_InitializeCfgVars:
130    push    es
131
132    call    Buffers_Clear
133    call    EEPROM_FindXtideUniversalBiosROMtoESDI
134    jnc     SHORT .InitializationCompleted
135    mov     [CFGVARS.wEepromSegment], es
136.InitializationCompleted:
137    pop     es
138    ret
139
140
141; Section containing initialized data
142SECTION .data
143
144ALIGN WORD_ALIGN
145g_cfgVars:
146istruc CFGVARS
147    at  CFGVARS.pMenupage,          dw  g_MenupageForMainMenu
148    at  CFGVARS.wFlags,             dw  DEFAULT_CFGVARS_FLAGS
149    at  CFGVARS.wEepromSegment,     dw  0
150    at  CFGVARS.bEepromType,        db  DEFAULT_EEPROM_TYPE
151    at  CFGVARS.bEepromPage,        db  DEFAULT_PAGE_SIZE
152    at  CFGVARS.bSdpCommand,        db  DEFAULT_SDP_COMMAND
153iend
154
155
156; Section containing uninitialized data
157SECTION .bss
Note: See TracBrowser for help on using the repository browser.