1 | #################################################################################################### |
---|
2 | # Makefile to build XTIDE Universal BIOS. # |
---|
3 | # # |
---|
4 | # Valid makefile targets are: # |
---|
5 | # all Removes existing files and builds binary files in \Build # |
---|
6 | # small Builds 8 kiB binaries only (without checksum) # |
---|
7 | # large Builds 12 kiB binaries only (without checksum) # |
---|
8 | # clean Removes all files from \Build # |
---|
9 | # checksum* Builds all and then generates checksum byte to all binary files # |
---|
10 | # strings* Compress src\Strings.asm to src\StringsCompressed.asm # |
---|
11 | # unused* Checks if there are any unused functions that can be removed to save space # |
---|
12 | # # |
---|
13 | # * at the end of target name means that Perl is required for the job. # |
---|
14 | # Build directory must be created manually if it does not exist. # |
---|
15 | # # |
---|
16 | # # |
---|
17 | # Following modules can be included or excluded: # |
---|
18 | # MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE # |
---|
19 | # MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF # |
---|
20 | # MODULE_ADVANCED_ATA Native support for some VLB IDE controllers # |
---|
21 | # MODULE_COMPATIBLE_TABLES Support for ill behaving software that tries to access DPT directly # |
---|
22 | # MODULE_BOOT_MENU Boot Menu for selection of drive to boot from # |
---|
23 | # MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB # |
---|
24 | # MODULE_HOTKEYS Hotkey Bar to boot from any drive # |
---|
25 | # MODULE_IRQ IDE IRQ support # |
---|
26 | # MODULE_SERIAL Virtual hard disks using serial port # |
---|
27 | # MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) # |
---|
28 | # MODULE_STRINGS_COMPRESSED Use compressed strings to save space # |
---|
29 | # MODULE_VERY_LATE_INIT Initialize on INT 13h if our INT 19h handler is not called # |
---|
30 | # MODULE_POWER_MANAGEMENT Power Management support # |
---|
31 | # # |
---|
32 | # Not modules but these affect the assembly: # |
---|
33 | # ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes # |
---|
34 | # RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory # |
---|
35 | # RESERVE_DIAGNOSTIC_CYLINDER Reserve one L-CHS cylinder for compatibility with old BIOSes # |
---|
36 | # DANGEROUS_DETECTION Scans Advanced Controllers from dangerous ports like mirrored PIC # |
---|
37 | # NO_ATAID_VALIDATION *** Excludes code that tries to ensure proper communication with drives # |
---|
38 | # USE_186 Use instructions supported by 80188/80186 and V20/V30 and later # |
---|
39 | # USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)# |
---|
40 | # USE_386 Use instructions supported by 386 and later (defines USE_286) # |
---|
41 | # USE_AT Use features supported on AT and later systems (not available on XT) # |
---|
42 | # USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s # |
---|
43 | # # |
---|
44 | # ** AT Builds only (when USE_AT is defined) # |
---|
45 | # *** Use this only when certain known good drives are not being detected (eg WD Caviars) # |
---|
46 | #################################################################################################### |
---|
47 | |
---|
48 | ########################################### |
---|
49 | # Source files and destination executable # |
---|
50 | ########################################### |
---|
51 | |
---|
52 | # Assembly source code file (*.asm): |
---|
53 | SRC_ASM = Src/Main.asm |
---|
54 | |
---|
55 | # Program executable file name without extension: |
---|
56 | PROG = ide |
---|
57 | |
---|
58 | |
---|
59 | ####################################### |
---|
60 | # Destination and include directories # |
---|
61 | ####################################### |
---|
62 | |
---|
63 | # Directory where binary file will be compiled to |
---|
64 | BUILD_DIR = Build |
---|
65 | |
---|
66 | # Subdirectories where included files are: |
---|
67 | HEADERS = Inc/ |
---|
68 | HEADERS += Inc/Controllers/ |
---|
69 | HEADERS += Src/ |
---|
70 | HEADERS += Src/Handlers/ |
---|
71 | HEADERS += Src/Handlers/Int13h/ |
---|
72 | HEADERS += Src/Handlers/Int13h/EBIOS/ |
---|
73 | HEADERS += Src/Handlers/Int13h/Tools/ |
---|
74 | HEADERS += Src/Handlers/Int19h/ |
---|
75 | HEADERS += Src/Device/ |
---|
76 | HEADERS += Src/Device/IDE/ |
---|
77 | HEADERS += Src/Device/MemoryMappedIDE/ |
---|
78 | HEADERS += Src/Device/Serial/ |
---|
79 | HEADERS += Src/Initialization/ |
---|
80 | HEADERS += Src/Initialization/AdvancedAta/ |
---|
81 | HEADERS += Src/Menus/ |
---|
82 | HEADERS += Src/Menus/BootMenu/ |
---|
83 | HEADERS += Src/Libraries/ |
---|
84 | HEADERS += Src/VariablesAndDPTs/ |
---|
85 | |
---|
86 | # Subdirectories where library files are: |
---|
87 | LIBS = ../Assembly_Library/Inc/ |
---|
88 | LIBS += ../Assembly_Library/Src/ |
---|
89 | LIBS += ../Assembly_Library/Src/Display/ |
---|
90 | LIBS += ../Assembly_Library/Src/File/ |
---|
91 | LIBS += ../Assembly_Library/Src/Keyboard/ |
---|
92 | LIBS += ../Assembly_Library/Src/Menu/ |
---|
93 | LIBS += ../Assembly_Library/Src/Menu/Dialog/ |
---|
94 | LIBS += ../Assembly_Library/Src/String/ |
---|
95 | LIBS += ../Assembly_Library/Src/Time/ |
---|
96 | LIBS += ../Assembly_Library/Src/Util/ |
---|
97 | LIBS += ../Assembly_Library/Src/Serial/ |
---|
98 | LIBS += ../XTIDE_Universal_BIOS/Inc/ |
---|
99 | HEADERS += $(LIBS) |
---|
100 | |
---|
101 | |
---|
102 | ################################################################# |
---|
103 | # Assembler preprocessor defines. # |
---|
104 | ################################################################# |
---|
105 | DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT RESERVE_DIAGNOSTIC_CYLINDER NO_ATAID_VALIDATION |
---|
106 | DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES |
---|
107 | |
---|
108 | DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED |
---|
109 | DEFINES_XTPLUS = $(DEFINES_XT) USE_186 |
---|
110 | DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_ADVANCED_ATA MODULE_COMPATIBLE_TABLES |
---|
111 | |
---|
112 | DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE) |
---|
113 | DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE) |
---|
114 | DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE) |
---|
115 | |
---|
116 | DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION |
---|
117 | DEFINES_386_8K = $(DEFINES_AT) USE_386 |
---|
118 | |
---|
119 | DEFINES_ALL_FEATURES = MODULE_8BIT_IDE MODULE_8BIT_IDE_ADVANCED MODULE_ADVANCED_ATA MODULE_EBIOS MODULE_BOOT_MENU MODULE_HOTKEYS MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_STRINGS_COMPRESSED MODULE_POWER_MANAGEMENT MODULE_COMPATIBLE_TABLES |
---|
120 | DEFINES_ALL_FEATURES += ELIMINATE_CGA_SNOW RELOCATE_INT13H_STACK RESERVE_DIAGNOSTIC_CYLINDER |
---|
121 | |
---|
122 | |
---|
123 | ################### |
---|
124 | # Other variables # |
---|
125 | ################### |
---|
126 | |
---|
127 | # Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below |
---|
128 | BIOS_SIZE = 8192 # For BIOS header (use even multiplier!) |
---|
129 | ROMSIZE = $(BIOS_SIZE) # Size of binary to build when building with make checksum |
---|
130 | BIOS_SIZE_LARGE = 12288 |
---|
131 | ROMSIZE_LARGE = $(BIOS_SIZE_LARGE) |
---|
132 | |
---|
133 | # Add -D in front of every preprocessor define declaration |
---|
134 | DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) |
---|
135 | DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) |
---|
136 | DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) |
---|
137 | DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE) |
---|
138 | DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE) |
---|
139 | DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE) |
---|
140 | DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) |
---|
141 | DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) |
---|
142 | DEFS_ALL_FEATURES = $(DEFINES_ALL_FEATURES:%=-D%) |
---|
143 | |
---|
144 | # Add -I in front of all header directories |
---|
145 | IHEADERS = $(HEADERS:%=-I%) |
---|
146 | |
---|
147 | # Path + target file to be built |
---|
148 | TARGET = $(BUILD_DIR)/$(PROG) |
---|
149 | |
---|
150 | ######################### |
---|
151 | # Compilers and linkers # |
---|
152 | ######################### |
---|
153 | |
---|
154 | # Make |
---|
155 | MAKE = mingw32-make.exe |
---|
156 | |
---|
157 | # Assembler |
---|
158 | AS = nasm.exe |
---|
159 | |
---|
160 | # use this command to erase files. |
---|
161 | RM = -del /Q |
---|
162 | |
---|
163 | |
---|
164 | ############################# |
---|
165 | # Compiler and linker flags # |
---|
166 | ############################# |
---|
167 | |
---|
168 | # Assembly compiler flags |
---|
169 | ASFLAGS = -f bin # Produce binary object files |
---|
170 | ASFLAGS += $(IHEADERS) # Set header file directory paths |
---|
171 | ASFLAGS += -Worphan-labels # Warn about labels without colon |
---|
172 | ASFLAGS += -Ox # Optimize operands to their shortest forms |
---|
173 | |
---|
174 | |
---|
175 | ############################################ |
---|
176 | # Build process. Actual work is done here. # |
---|
177 | ############################################ |
---|
178 | |
---|
179 | all: clean small large |
---|
180 | @echo All done! |
---|
181 | |
---|
182 | small: xt_tiny xt xtplus at 386_8k |
---|
183 | @echo All small binaries built! |
---|
184 | |
---|
185 | large: xt_large xtplus_large at_large |
---|
186 | @echo All large binaries built! |
---|
187 | |
---|
188 | at: |
---|
189 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin" |
---|
190 | @echo * Small AT version "$(TARGET)_at.bin" built. |
---|
191 | |
---|
192 | at_large: |
---|
193 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin" |
---|
194 | @echo * Large AT version "$(TARGET)_atl.bin" built. |
---|
195 | |
---|
196 | xtplus: |
---|
197 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin" |
---|
198 | @echo * Small XT Plus version "$(TARGET)_xtp.bin" built. |
---|
199 | |
---|
200 | xtplus_large: |
---|
201 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin" |
---|
202 | @echo * Large XT Plus version "$(TARGET)_xtpl.bin" built. |
---|
203 | |
---|
204 | xt: |
---|
205 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin" |
---|
206 | @echo * Small XT version "$(TARGET)_xt.bin" built. |
---|
207 | |
---|
208 | xt_large: |
---|
209 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin" |
---|
210 | @echo * Large XT version "$(TARGET)_xtl.bin" built. |
---|
211 | |
---|
212 | xt_tiny: |
---|
213 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin" |
---|
214 | @echo * Tiny XT version "$(TARGET)_tiny.bin" built. |
---|
215 | |
---|
216 | 386_8k: |
---|
217 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin" |
---|
218 | @echo * Small 386 version "$(TARGET)_386.bin" built. |
---|
219 | |
---|
220 | strings: src\Strings.asm |
---|
221 | @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst |
---|
222 | @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm |
---|
223 | @echo StringsCompressed.asm updated! |
---|
224 | |
---|
225 | clean: |
---|
226 | @$(RM) $(BUILD_DIR)\*.* |
---|
227 | @echo Deleted "(*.*)" from "$(BUILD_DIR)/" |
---|
228 | |
---|
229 | checksum: all |
---|
230 | @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE) |
---|
231 | @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE) |
---|
232 | @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE) |
---|
233 | @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE) |
---|
234 | @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE) |
---|
235 | @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE) |
---|
236 | @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE) |
---|
237 | @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE) |
---|
238 | |
---|
239 | unused: |
---|
240 | @echo "All Features" |
---|
241 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -l"$(TARGET)_unused.lst" |
---|
242 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS |
---|
243 | @perl ..\tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm |
---|
244 | @echo "XT Small" |
---|
245 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst" |
---|
246 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS |
---|
247 | @perl ..\tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm |
---|
248 | @echo "XT Large" |
---|
249 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst" |
---|
250 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS |
---|
251 | @perl ..\tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm |
---|
252 | @echo "AT Small" |
---|
253 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst" |
---|
254 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS |
---|
255 | @perl ..\tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm |
---|
256 | @echo "AT Large" |
---|
257 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst" |
---|
258 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS |
---|
259 | @perl ..\tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm |
---|
260 | |
---|
261 | |
---|