source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/CreateDPT.asm @ 535

Last change on this file since 535 was 535, checked in by aitotat@…, 11 years ago

Changes to XTIDE Universal BIOS:

  • AH=48h now returns Device Parameter Table Extension when RETURN_DPTE_ON_AH48H is defined.
  • Removed few unnecessary instructions from hardware interrupt handler.
  • P-Cylinders returned by AH=48h are no longer calculated from L-CHS capacity.
File size: 12.1 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for creating Disk Parameter Table.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Creates new Disk Parameter Table for detected hard disk.
25; Drive is then fully accessible using any BIOS function.
26;
27; CreateDPT_FromAtaInformation
28;   Parameters:
29;       BH:     Drive Select byte for Drive and Head Register
30;       DX:     Autodetected port (for devices that support autodetection)
31;       ES:SI:  Ptr to 512-byte ATA information read from the drive
32;       CS:BP:  Ptr to IDEVARS for the controller
33;       DS:     RAMVARS segment
34;       ES:     BDA Segment
35;   Returns:
36;       DS:DI:  Ptr to Disk Parameter Table (if successful)
37;       CF:     Cleared if DPT created successfully
38;               Set if any error
39;   Corrupts registers:
40;       AX, BX, CX, DH
41;--------------------------------------------------------------------
42CreateDPT_FromAtaInformation:
43    call    FindDPT_ForNewDriveToDSDI
44    ; Fall to .InitializeDPT
45
46;--------------------------------------------------------------------
47; .InitializeDPT
48;   Parameters:
49;       BH:     Drive Select byte for Drive and Head Register
50;       DX:     Autodetected port (for devices that support autodetection)
51;       DS:DI:  Ptr to Disk Parameter Table
52;       CS:BP:  Ptr to IDEVARS for the controller
53;   Returns:
54;       Nothing
55;   Corrupts registers:
56;       AX
57;--------------------------------------------------------------------
58.InitializeDPT:
59    call    CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI
60    ; Fall to .StoreDriveSelectAndDriveControlByte
61
62;--------------------------------------------------------------------
63; .StoreDriveSelectAndDriveControlByte
64;   Parameters:
65;       BH:     Drive Select byte for Drive and Head Register
66;       DS:DI:  Ptr to Disk Parameter Table
67;       ES:SI:  Ptr to 512-byte ATA information read from the drive
68;       CS:BP:  Ptr to IDEVARS for the controller
69;   Returns:
70;       Nothing
71;   Corrupts registers:
72;       AX
73;--------------------------------------------------------------------
74.StoreDriveSelectAndDriveControlByte:
75    mov     al, bh
76    and     ax, BYTE FLG_DRVNHEAD_DRV       ; AL now has Master/Slave bit
77%ifdef MODULE_IRQ
78    cmp     [cs:bp+IDEVARS.bIRQ], ah        ; Interrupts enabled?
79    jz      SHORT .StoreFlags               ;  If not, do not set interrupt flag
80    or      al, FLGL_DPT_ENABLE_IRQ
81.StoreFlags:
82%endif
83    mov     [di+DPT.wFlags], ax
84    ; Fall to .StoreCHSparametersAndAddressingMode
85
86;--------------------------------------------------------------------
87; .StoreCHSparametersAndAddressingMode
88;   Parameters:
89;       DS:DI:  Ptr to Disk Parameter Table
90;       ES:SI:  Ptr to 512-byte ATA information read from the drive
91;       CS:BP:  Ptr to IDEVARS for the controller
92;   Returns:
93;       Nothing
94;   Corrupts registers:
95;       AX, BX, CX, DX
96;--------------------------------------------------------------------
97.StoreCHSparametersAndAddressingMode:
98    ; Check if CHS defined in ROMVARS
99    call    GetUserDefinedCapacityToBXAXandFlagsToCXandModeToDXfromROMVARS
100    test    cl, FLG_DRVPARAMS_USERCHS
101    jz      SHORT .AutodetectPCHSvalues
102
103    ; Translate P-CHS to L-CHS
104    call    AtaGeometry_GetLCHStoAXBLBHfromPCHSinAXBLBHandTranslateModeInDX
105    jmp     SHORT .StoreLCHStoDPT
106.AutodetectPCHSvalues:
107    call    AtaGeometry_GetLCHStoAXBLBHfromAtaInfoInESSIandTranslateModeInDX
108
109.StoreLCHStoDPT:
110    eSHL_IM dl, TRANSLATEMODE_FIELD_POSITION
111    or      cl, dl
112    or      [di+DPT.bFlagsLow], cl      ; Shift count and addressing mode
113    mov     [di+DPT.wLchsCylinders], ax
114    mov     [di+DPT.wLchsHeadsAndSectors], bx
115
116    ; Store P-CHS to DPT
117    call    AtaGeometry_GetPCHStoAXBLBHfromAtaInfoInESSI
118    mov     [di+DPT.bPchsHeads], bl
119%ifdef MODULE_EBIOS
120    mov     [di+DPT.bPchsSectorsPerTrack], bh
121
122; This is what Award BIOS from 1997 Pentium motherboard does. I can't think
123; of any good reason to do the same but let's keep this here just in case,
124; at least for a while.
125%if 0
126%ifdef RESERVE_DIAGNOSTIC_CYLINDER
127    ; Do not store P-Cylinders, instead calculate it from L-CHS total sector count.
128    ; Read AH=48h_GetExtendedDriveParameters.asm for more info.
129    xchg    ax, bx
130    mul     ah
131    push    ax                          ; P-Heads * P-Sectors per track
132    call    AH15h_GetSectorCountToBXDXAX
133    pop     bx
134    div     bx                          ; AX = Calculated cylinders
135%endif ; RESERVE_DIAGNOSTIC_CYLINDER
136%endif ; 0
137
138    mov     [di+DPT.wPchsCylinders], ax
139    ; Fall to .StoreNumberOfLbaSectors
140
141;--------------------------------------------------------------------
142; .StoreNumberOfLbaSectors
143;   Parameters:
144;       DS:DI:  Ptr to Disk Parameter Table
145;       ES:SI:  Ptr to 512-byte ATA information read from the drive
146;       CS:BP:  Ptr to IDEVARS for the controller
147;   Returns:
148;       Nothing
149;   Corrupts registers:
150;       AX, BX, CX, DX
151;--------------------------------------------------------------------
152    ; Check if LBA supported
153    test    BYTE [es:si+ATA1.wCaps+1], A1_wCaps_LBA>>8
154    jz      SHORT .NoLbaSupportedSoNoEBIOS
155
156    ; Store LBA 28/48 total sector count
157    call    AtaGeometry_GetLbaSectorCountToBXDXAXfromAtaInfoInESSI
158    call    StoreLba48AddressingFromCLandTotalSectorCountFromBXDXAX
159
160    ; If we have 15,482,880 or less sectors, we multiply P-CHS values
161    ; and use that as total sector count.
162    ; Read AH=48h_GetExtendedDriveParameters.asm for more info.
163    sub     ax, 4001h
164    sbb     dx, 0ECh
165    sbb     bx, BYTE 0
166    jnc     SHORT .NoNeedToUseCHSsectorCount    ; More than EC4000h
167
168    mov     al, [di+DPT.bPchsHeads]
169    mul     BYTE [di+DPT.bPchsSectorsPerTrack]
170    mul     WORD [di+DPT.wPchsCylinders]
171    xor     bx, bx
172    call    StoreLba48AddressingFromCLandTotalSectorCountFromBXDXAX
173
174    ; Load user defined LBA
175.NoNeedToUseCHSsectorCount:
176    call    GetUserDefinedCapacityToBXAXandFlagsToCXandModeToDXfromROMVARS
177    test    cl, FLG_DRVPARAMS_USERLBA
178    jz      SHORT .KeepTotalSectorsFromAtaID
179
180    ; Compare user defined and ATA-ID sector count and select smaller
181    mov     dx, bx
182    xor     bx, bx      ; User defined LBA now in BX:DX:AX
183    cmp     bx, [di+DPT.twLbaSectors+4]
184    jb      SHORT .StoreUserDefinedSectorCountToDPT
185    cmp     dx, [di+DPT.twLbaSectors+2]
186    jb      SHORT .StoreUserDefinedSectorCountToDPT
187    ja      SHORT .KeepTotalSectorsFromAtaID
188    cmp     ax, [di+DPT.twLbaSectors]
189    jae     SHORT .KeepTotalSectorsFromAtaID
190.StoreUserDefinedSectorCountToDPT:
191    ; CL bit FLGL_DPT_LBA48 is clear at this point
192    call    StoreLba48AddressingFromCLandTotalSectorCountFromBXDXAX
193
194.KeepTotalSectorsFromAtaID:
195.NoLbaSupportedSoNoEBIOS:
196%endif ; MODULE_EBIOS
197    ; Fall to .StoreBlockMode
198
199;--------------------------------------------------------------------
200; .StoreBlockMode
201;   Parameters:
202;       DS:DI:  Ptr to Disk Parameter Table
203;       ES:SI:  Ptr to 512-byte ATA information read from the drive
204;       CS:BP:  Ptr to IDEVARS for the controller
205;   Returns:
206;       Nothing
207;   Corrupts registers:
208;       Nothing
209;--------------------------------------------------------------------
210.StoreBlockMode:
211    cmp     BYTE [es:si+ATA1.bBlckSize], 1  ; Max block size in sectors
212    jbe     SHORT .BlockModeTransfersNotSupported
213    or      BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED
214.BlockModeTransfersNotSupported:
215    ; Fall to .StoreDeviceSpecificParameters
216
217;--------------------------------------------------------------------
218; .StoreDeviceSpecificParameters
219;   Parameters:
220;       DS:DI:  Ptr to Disk Parameter Table
221;       ES:SI:  Ptr to 512-byte ATA information read from the drive
222;       CS:BP:  Ptr to IDEVARS for the controller
223;   Returns:
224;       Nothing
225;   Corrupts registers:
226;       AX, BX, CX, DX
227;--------------------------------------------------------------------
228.StoreDeviceSpecificParameters:
229    call    Device_FinalizeDPT
230
231;----------------------------------------------------------------------
232; Update drive counts (hard and floppy)
233;----------------------------------------------------------------------
234
235%ifdef MODULE_SERIAL_FLOPPY
236;
237; These two instructions serve two purposes:
238; 1. If the drive is a floppy drive (CF set), then we effectively increment the counter.
239; 2. If this is a hard disk, and there have been any floppy drives previously added, then the hard disk is
240;    effectively discarded.  This is more of a safety check then code that should ever normally be hit (see below).
241;    Since the floppy DPT's come after the hard disk DPT's, without expensive (code size) code to relocate a DPT,
242;    this was necessary.  Now, this situation shouldn't happen in normal operation, for a couple of reasons:
243;       A. xtidecfg always puts configured serial ports at the end of the IDEVARS list
244;       B. the auto serial code is always executed last
245;       C. the serial server always returns floppy drives last
246;
247    adc     byte [RAMVARS.xlateVars+XLATEVARS.bFlopCreateCnt], 0
248    jnz     .AllDone
249%else
250;
251; Even without floppy support enabled, we shouldn't try to mount a floppy image as a hard disk, which
252; could lead to unpredictable results since no MBR will be present, etc.  The server doesn't know that
253; floppies are supported, so it is important to still fail here if a floppy is seen during the drive scan.
254;
255    jc      .AllDone
256%endif
257
258    inc     BYTE [RAMVARS.bDrvCnt]      ; Increment drive count to RAMVARS
259
260.AllDone:
261    clc
262    ret
263
264
265;--------------------------------------------------------------------
266; CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI
267;   Parameters:
268;       DX:     Autodetected port (for devices that support autodetection)
269;       DS:DI:  Ptr to Disk Parameter Table
270;       CS:BP:  Ptr to IDEVARS for the controller
271;   Returns:
272;       Nothing
273;   Corrupts registers:
274;       AX
275;--------------------------------------------------------------------
276CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI:
277    mov     [di+DPT.bIdevarsOffset], bp     ; IDEVARS must start in first 256 bytes of ROM
278
279%ifdef MODULE_8BIT_IDE_ADVANCED
280    call    DetectDrives_DoesIdevarsInCSBPbelongToXTCF
281    jne     SHORT .DeviceUsesPortSpecifiedInIDEVARS
282    mov     [di+DPT.wBasePort], dx
283    ret
284.DeviceUsesPortSpecifiedInIDEVARS:
285%endif ; MODULE_8BIT_IDE_ADVANCED
286
287    mov     ax, [cs:bp+IDEVARS.wBasePort]
288    mov     [di+DPT.wBasePort], ax
289    ret
290
291
292;--------------------------------------------------------------------
293; GetUserDefinedCapacityToBXAXandFlagsToCXandModeToDXfromROMVARS
294;   Parameters:
295;       DS:DI:      Ptr to Disk Parameter Table
296;   Returns:
297;       AX:         User defined P-CHS Cylinders or LBA low word
298;       BX:         User defined P-CHS Heads and Sectors or LBA high word
299;       DX:         Translate mode or TRANSLATEMODE_AUTO
300;       CX:         FLG_DRVPARAMS_USERCHS if user defined CHS in BX:AX
301;                   FLG_DRVPARAMS_USERLBA if user defined LBA in BX:AX
302;                   Zero if user has not defined capacity
303;   Corrupts registers:
304;       Nothing
305;--------------------------------------------------------------------
306GetUserDefinedCapacityToBXAXandFlagsToCXandModeToDXfromROMVARS:
307    call    AccessDPT_GetPointerToDRVPARAMStoCSBX
308
309    ; Get settings
310    mov     cx, [cs:bx+DRVPARAMS.wFlags]
311    mov     dx, cx
312    and     cx, BYTE FLG_DRVPARAMS_USERCHS | FLG_DRVPARAMS_USERLBA
313    and     dx, BYTE MASK_DRVPARAMS_TRANSLATEMODE
314    eSHR_IM dx, TRANSLATEMODE_FIELD_POSITION
315
316    ; Get capacity
317    mov     ax, [cs:bx+DRVPARAMS.wCylinders]        ; Or .dwMaximumLBA
318    mov     bx, [cs:bx+DRVPARAMS.wHeadsAndSectors]  ; Or .dwMaximumLBA+2
319    ret
320
321
322%ifdef MODULE_EBIOS
323;--------------------------------------------------------------------
324; StoreLba48AddressingFromCLandTotalSectorCountFromBXDXAX
325;   Parameters:
326;       BX:DX:AX:   Total Sector Count
327;       CL:         FLGL_DPT_LBA48 if LBA48 supported
328;       DS:DI:      Ptr to Disk Parameter Table
329;   Returns:
330;       Nothing
331;   Corrupts registers:
332;       CL
333;--------------------------------------------------------------------
334StoreLba48AddressingFromCLandTotalSectorCountFromBXDXAX:
335    or      cl, FLGL_DPT_LBA_AND_EBIOS_SUPPORTED
336    and     BYTE [di+DPT.bFlagsLow], ~FLGL_DPT_LBA48
337    or      [di+DPT.bFlagsLow], cl
338    mov     [di+DPT.twLbaSectors], ax
339    mov     [di+DPT.twLbaSectors+2], dx
340    mov     [di+DPT.twLbaSectors+4], bx
341    ret
342%endif ; MODULE_EBIOS
Note: See TracBrowser for help on using the repository browser.