1 | ; Project name : XTIDE Universal BIOS |
---|
2 | ; Description : Strings and equates for BIOS messages. |
---|
3 | |
---|
4 | ; |
---|
5 | ; XTIDE Universal BIOS and Associated Tools |
---|
6 | ; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team. |
---|
7 | ; |
---|
8 | ; This program is free software; you can redistribute it and/or modify |
---|
9 | ; it under the terms of the GNU General Public License as published by |
---|
10 | ; the Free Software Foundation; either version 2 of the License, or |
---|
11 | ; (at your option) any later version. |
---|
12 | ; |
---|
13 | ; This program is distributed in the hope that it will be useful, |
---|
14 | ; but WITHOUT ANY WARRANTY; without even the implied warranty of |
---|
15 | ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
---|
16 | ; GNU General Public License for more details. |
---|
17 | ; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html |
---|
18 | ; |
---|
19 | |
---|
20 | %ifdef MODULE_STRINGS_COMPRESSED_PRECOMPRESS |
---|
21 | %include "Display.inc" |
---|
22 | %endif |
---|
23 | |
---|
24 | ; Section containing code |
---|
25 | SECTION .text |
---|
26 | |
---|
27 | ; POST drive detection strings |
---|
28 | g_szDashForZero: db "- ",NULL ; Required by Display Library |
---|
29 | g_szRomAt: db LF,CR,"%s @ %x",LF,CR |
---|
30 | db "Released under GNU GPL v2",LF,CR,LF,CR,NULL |
---|
31 | |
---|
32 | |
---|
33 | ; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP |
---|
34 | ; To support an optimization in that code, these strings must start on the same 256 byte page, |
---|
35 | ; which is checked at assembly time below. |
---|
36 | ; |
---|
37 | g_szDetectStart: |
---|
38 | g_szDetectMaster: db "Master",NULL |
---|
39 | g_szDetectSlave: db "Slave ",NULL |
---|
40 | g_szDetectOuter: db "%s at %s: ",NULL |
---|
41 | %ifdef MODULE_SERIAL |
---|
42 | g_szDetectCOM: db "COM%c%s",NULL |
---|
43 | g_szDetectCOMAuto: db " Detect",NULL |
---|
44 | g_szDetectCOMSmall: db "/%u%u00",NULL ; IDE Master at COM1/9600: |
---|
45 | g_szDetectCOMLarge: db "/%u.%uK",NULL ; IDE Master at COM1/19.2K: |
---|
46 | %endif |
---|
47 | g_szDetectEnd: |
---|
48 | g_szDetectPort: db "%x",NULL ; IDE Master at 1F0h: |
---|
49 | |
---|
50 | %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS |
---|
51 | %if ((g_szDetectEnd-$$) & 0xff00) <> ((g_szDetectStart-$$) & 0xff00) |
---|
52 | %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP. Please move this block up or down within strings.asm" |
---|
53 | %endif |
---|
54 | %endif |
---|
55 | |
---|
56 | |
---|
57 | ; Boot loader strings |
---|
58 | g_szTryToBoot: db "Booting %c",ANGLE_QUOTE_RIGHT,"%c",LF,CR,NULL |
---|
59 | g_szBootSectorNotFound: db "Boot sector " |
---|
60 | g_szNotFound: db "not found",LF,CR,NULL |
---|
61 | g_szReadError: db "Error %x!",LF,CR,NULL |
---|
62 | |
---|
63 | |
---|
64 | %ifdef MODULE_HOTKEYS |
---|
65 | |
---|
66 | ; Hotkey Bar strings |
---|
67 | g_szFDD: db "FDD [%c]",NULL ; "FDD [A]" |
---|
68 | g_szHDD: db "HDD [%c]",NULL ; "HDD [C]" |
---|
69 | g_szBootMenu: db "%sMnu",NULL ; "BootMnu" |
---|
70 | g_szRomBoot: db "Rom%s",NULL ; "RomBoot" |
---|
71 | g_szBoot: db "Boot",NULL |
---|
72 | g_szHotkey: db "%A%c%c%A%s%A ",NULL ; "C»HDD [A] ", "F2BootMnu " or "F8RomBoot " |
---|
73 | |
---|
74 | |
---|
75 | %ifdef MODULE_BOOT_MENU |
---|
76 | |
---|
77 | ; Boot Menu Floppy Disk strings |
---|
78 | ; |
---|
79 | ; The following strings are used by BootMenuPrint_RefreshInformation |
---|
80 | ; To support optimizations in that code, these strings must start on the same 256 byte page, |
---|
81 | ; which is checked at assembly time below. |
---|
82 | ; |
---|
83 | g_szFddStart: |
---|
84 | g_szFddUnknown: db "Unknown",NULL |
---|
85 | g_szFddSizeOr: db "5",ONE_QUARTER,QUOTATION_MARK," or 3",ONE_HALF,QUOTATION_MARK," DD",NULL |
---|
86 | g_szFddSize: db "%s",QUOTATION_MARK,", %u kiB",NULL ; 3½", 1440 kiB |
---|
87 | g_szFddThreeHalf: db "3",ONE_HALF,NULL |
---|
88 | g_szFddEnd: |
---|
89 | g_szFddFiveQuarter: db "5",ONE_QUARTER,NULL |
---|
90 | |
---|
91 | %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS |
---|
92 | %if ((g_szFddStart-$$) & 0xff00) <> ((g_szFddEnd-$$) & 0xff00) |
---|
93 | %error "g_szFdd* strings must start on the same 256 byte page, required by the BootMenuPrint_RefreshInformation routines for floppy drives. Please move this block up or down within strings.asm" |
---|
94 | %endif |
---|
95 | %endif |
---|
96 | |
---|
97 | |
---|
98 | g_szAddressingModes: |
---|
99 | g_szNORMAL: db "NORMAL",NULL |
---|
100 | g_szLARGE: db "LARGE ",NULL |
---|
101 | g_szLBA: db "LBA ",NULL |
---|
102 | g_szAddressingModes_Displacement equ (g_szLARGE - g_szAddressingModes) |
---|
103 | ; |
---|
104 | ; Ensure that addressing modes are correctly spaced in memory |
---|
105 | ; |
---|
106 | %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS |
---|
107 | %if g_szNORMAL <> g_szAddressingModes |
---|
108 | %error "g_szAddressingModes Displacement Incorrect 1" |
---|
109 | %endif |
---|
110 | %if g_szLARGE <> g_szNORMAL + g_szAddressingModes_Displacement |
---|
111 | %error "g_szAddressingModes Displacement Incorrect 2" |
---|
112 | %endif |
---|
113 | %if g_szLBA <> g_szLARGE + g_szAddressingModes_Displacement |
---|
114 | %error "g_szAddressingModes Displacement Incorrect 3" |
---|
115 | %endif |
---|
116 | %endif |
---|
117 | |
---|
118 | g_szDeviceTypeValues: |
---|
119 | g_szDeviceTypeValues_16bit: db " 16",NULL |
---|
120 | g_szDeviceTypeValues_32bit: db " 32",NULL |
---|
121 | g_szDeviceTypeValues_8bit: db " 8",NULL |
---|
122 | g_szDeviceTypeValues_XTIDEr1: db "D8 ",NULL ; Dual 8-bit |
---|
123 | g_szDeviceTypeValues_XTIDEr2: db "X8 ",NULL ; A0<->A3 swapped 8-bit |
---|
124 | g_szDeviceTypeValues_XTCFpio8: db "T8 ",NULL ; True 8-bit |
---|
125 | g_szDeviceTypeValues_XTCFdma: db "8MA",NULL ; DMA 8-bit |
---|
126 | g_szDeviceTypeValues_XTCFmem: db "M8 ",NULL ; Memory Mapped 8-bit |
---|
127 | g_szDeviceTypeValues_JrIde: db "M8 ",NULL |
---|
128 | g_szDeviceTypeValues_Serial: db "SER",NULL |
---|
129 | |
---|
130 | g_szDeviceTypeValues_Displacement equ (g_szDeviceTypeValues_32bit - g_szDeviceTypeValues) |
---|
131 | ; |
---|
132 | ; Ensure that device type strings are correctly spaced in memory |
---|
133 | ; |
---|
134 | %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS |
---|
135 | %if g_szDeviceTypeValues_16bit <> g_szDeviceTypeValues |
---|
136 | %error "g_szDeviceTypeValues Displacement Incorrect 1" |
---|
137 | %endif |
---|
138 | %if g_szDeviceTypeValues_32bit <> g_szDeviceTypeValues_16bit + g_szDeviceTypeValues_Displacement |
---|
139 | %error "g_szDeviceTypeValues Displacement Incorrect 2" |
---|
140 | %endif |
---|
141 | %if g_szDeviceTypeValues_8bit <> g_szDeviceTypeValues_32bit + g_szDeviceTypeValues_Displacement |
---|
142 | %error "g_szDeviceTypeValues Displacement Incorrect 2" |
---|
143 | %endif |
---|
144 | %if g_szDeviceTypeValues_XTIDEr1 <> g_szDeviceTypeValues_8bit + g_szDeviceTypeValues_Displacement |
---|
145 | %error "g_szDeviceTypeValues Displacement Incorrect 3" |
---|
146 | %endif |
---|
147 | %if g_szDeviceTypeValues_XTIDEr2 <> g_szDeviceTypeValues_XTIDEr1 + g_szDeviceTypeValues_Displacement |
---|
148 | %error "g_szDeviceTypeValues Displacement Incorrect 4" |
---|
149 | %endif |
---|
150 | %if g_szDeviceTypeValues_XTCFpio8 <> g_szDeviceTypeValues_XTIDEr2 + g_szDeviceTypeValues_Displacement |
---|
151 | %error "g_szDeviceTypeValues Displacement Incorrect 5" |
---|
152 | %endif |
---|
153 | %if g_szDeviceTypeValues_XTCFdma <> g_szDeviceTypeValues_XTCFpio8 + g_szDeviceTypeValues_Displacement |
---|
154 | %error "g_szDeviceTypeValues Displacement Incorrect 6" |
---|
155 | %endif |
---|
156 | %if g_szDeviceTypeValues_XTCFmem <> g_szDeviceTypeValues_XTCFdma + g_szDeviceTypeValues_Displacement |
---|
157 | %error "g_szDeviceTypeValues Displacement Incorrect 7" |
---|
158 | %endif |
---|
159 | %if g_szDeviceTypeValues_JrIde <> g_szDeviceTypeValues_XTCFmem + g_szDeviceTypeValues_Displacement |
---|
160 | %error "g_szDeviceTypeValues Displacement Incorrect 8" |
---|
161 | %endif |
---|
162 | %if g_szDeviceTypeValues_Serial <> g_szDeviceTypeValues_JrIde + g_szDeviceTypeValues_Displacement |
---|
163 | %error "g_szDeviceTypeValues Displacement Incorrect 9" |
---|
164 | %endif |
---|
165 | %endif |
---|
166 | |
---|
167 | g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2-u s",NULL |
---|
168 | |
---|
169 | |
---|
170 | |
---|
171 | |
---|
172 | ; Boot Menu information strings |
---|
173 | g_szCapacity: db "Capacity : %s",NULL |
---|
174 | g_szCapacityNum: db "%5-u.%u %ciB",NULL |
---|
175 | g_szInformation: db "%s",LF,CR |
---|
176 | db "Addr. ",SINGLE_VERTICAL,"Block",SINGLE_VERTICAL,"Bus",SINGLE_VERTICAL, "IRQ",SINGLE_VERTICAL,"Reset",LF,CR |
---|
177 | db "%s",SINGLE_VERTICAL, "%5-u",SINGLE_VERTICAL, "%s",SINGLE_VERTICAL," %2-I",SINGLE_VERTICAL,"%5-x" ,NULL |
---|
178 | |
---|
179 | |
---|
180 | ; Boot Menu menuitem strings |
---|
181 | ; |
---|
182 | ; The following strings are used by BootMenuPrint_* routines. |
---|
183 | ; To support optimizations in that code, these strings must start on the same 256 byte page, |
---|
184 | ; which is checked at assembly time below. |
---|
185 | ; |
---|
186 | g_szBootMenuPrintStart: |
---|
187 | g_szDriveNum: db "%x %s",NULL |
---|
188 | g_szDriveNumBOOTNFO: db "%x %z",NULL |
---|
189 | g_szFloppyDrv: db "Floppy Drive %c",NULL |
---|
190 | g_szBootMenuPrintEnd: |
---|
191 | g_szForeignHD: db "Foreign Hard Disk",NULL |
---|
192 | |
---|
193 | %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS |
---|
194 | %if ((g_szBootMenuPrintStart-$$) & 0xff00) <> ((g_szBootMenuPrintEnd-$$) & 0xff00) |
---|
195 | %error "g_szBootMenuPrint* strings must start on the same 256 byte page, required by the BootMenuPrint_* routines. Please move this block up or down within strings.asm" |
---|
196 | %endif |
---|
197 | %endif |
---|
198 | |
---|
199 | %endif ; MODULE_BOOT_MENU |
---|
200 | %endif ; MODULE_HOTKEYS |
---|
201 | |
---|
202 | |
---|
203 | ;------------------------------------------------------------------------------------------ |
---|
204 | ; |
---|
205 | ; Tables for StringsCompress.pl |
---|
206 | ; |
---|
207 | ; Items can be added and removed from this table as needed, with the following rules: |
---|
208 | ; * Formats follow the special characters. But other than that, order makes no difference. |
---|
209 | ; * Some of the formats require "even" and "odd" numbering. Even tells the code that |
---|
210 | ; it is a "number-" format, otherwise it doesn't interpret a number first. The easiest |
---|
211 | ; way to maintain this is to move one of the "n/a" items to/from the front of the format |
---|
212 | ; list to maintain the even/odd. |
---|
213 | ; * Values do not need to remain consistent across versions. This table is only used |
---|
214 | ; internally to this file. |
---|
215 | ; * There can only be 32 of these (0-31). |
---|
216 | ; * Keeping the list short is good - this translates to a table in the compressed version. |
---|
217 | ; An error will be reported if a character or format is no longer being used by any |
---|
218 | ; strings above. |
---|
219 | ; * Please keep items sequential for ease of further editing. |
---|
220 | ; |
---|
221 | ;$translate{ord(' ')} = 0; |
---|
222 | ;$translate{172} = 1; # ONE_QUARTER |
---|
223 | ;$translate{171} = 2; # ONE_HALF |
---|
224 | ;$translate{179} = 3; # SINGLE_VERTICAL |
---|
225 | ;$translate{175} = 4; # ANGLE_QUOTE_RIGHT |
---|
226 | ;$translate{ord('!')} = 5; |
---|
227 | ;$translate{ord('"')} = 6; |
---|
228 | ;$translate{ord(',')} = 7; |
---|
229 | ;$translate{ord('-')} = 8; |
---|
230 | ;$translate{ord('.')} = 9; |
---|
231 | ;$translate{ord('/')} = 10; |
---|
232 | ;$translate{ord('1')} = 11; |
---|
233 | ;$translate{ord('2')} = 12; |
---|
234 | ;$translate{ord('3')} = 13; |
---|
235 | ;$translate{ord('5')} = 14; |
---|
236 | ;$translate{ord('6')} = 15; |
---|
237 | ;$translate{ord('8')} = 16; |
---|
238 | ;$translate{200} = 17; # DOUBLE_BOTTOM_LEFT_CORNER |
---|
239 | ;$translate{181} = 18; # DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL |
---|
240 | ;$translate{ord('0')} = 19; |
---|
241 | ; |
---|
242 | ; Formats begin immediately after the last Translated character (they are in the same table) |
---|
243 | ; |
---|
244 | ;$format_begin = 20; |
---|
245 | ; |
---|
246 | ;$format{"2-I"} = 20; # must be even |
---|
247 | ;$format{"u"} = 21; # must be odd |
---|
248 | ;$format{"5-u"} = 22; # must be even |
---|
249 | ;$format{"x"} = 23; # must be odd |
---|
250 | ;$format{"5-x"} = 24; # must be even |
---|
251 | ;$format{"nl"} = 25; # n/a |
---|
252 | ;$format{"2-u"} = 26; # must be even |
---|
253 | ;$format{"A"} = 27; # n/a |
---|
254 | ;$format{"c"} = 28; # n/a |
---|
255 | ;$format{"s"} = 29; # n/a, normal string from DS |
---|
256 | ;$format{"z"} = 30; # n/a, boot string from BDA |
---|
257 | ; |
---|
258 | ; NOTE: The last $format cannot exceed 31 (stored in a 5-bit quantity). |
---|
259 | ; |
---|
260 | ; Starting point for the "normal" range, typically around 0x40 to cover upper and lower case |
---|
261 | ; letters. If lower case 'z' is not used, 0x3a can be a good choice as it adds ':' to the |
---|
262 | ; front end. |
---|
263 | ; |
---|
264 | ;$normal_base = 0x3a; |
---|
265 | ; |
---|
266 | ; End of StringsCompress.pl information |
---|
267 | ; |
---|
268 | ;------------------------------------------------------------------------------------------ |
---|