source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Strings.asm@ 283

Last change on this file since 283 was 277, checked in by gregli@…, 13 years ago

Moved the bulk of the serial code to the assembly library, for inclusion in other utilities. Fixed a bug in int13h.asm when floppy support was not enabled that was preventing foreign drives from working properly.
File size: 8.1 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Strings and equates for BIOS messages.
3
4%ifdef MODULE_STRINGS_COMPRESSED_PRECOMPRESS
5 %include "Display.inc"
6%endif
7
8; Section containing code
9SECTION .text
10
11; POST drive detection strings
12g_szRomAt: db "%s @ %x",LF,CR,NULL
13
14; Boot loader strings
15g_szTryToBoot: db "Booting from %s %x",ANGLE_QUOTE_RIGHT,"%x",LF,CR,NULL
16g_szBootSectorNotFound: db "Boot sector "
17g_szNotFound: db "not found",LF,CR,NULL
18g_szReadError: db "Error %x!",LF,CR,NULL
19
20g_szAddressingModes:
21g_szLCHS: db "L-CHS",NULL
22g_szPCHS: db "P-CHS",NULL
23g_szLBA28: db "LBA28",NULL
24g_szLBA48: db "LBA48",NULL
25g_szAddressingModes_Displacement equ (g_szPCHS - g_szAddressingModes)
26;
27; Ensure that addressing modes are correctly spaced in memory
28;
29%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
30 %if g_szLCHS <> g_szAddressingModes
31 %error "g_szAddressingModes Displacement Incorrect 1"
32 %endif
33 %if g_szPCHS <> g_szLCHS + g_szAddressingModes_Displacement
34 %error "g_szAddressingModes Displacement Incorrect 2"
35 %endif
36 %if g_szLBA28 <> g_szPCHS + g_szAddressingModes_Displacement
37 %error "g_szAddressingModes Displacement Incorrect 3"
38 %endif
39 %if g_szLBA48 <> g_szLBA28 + g_szAddressingModes_Displacement
40 %error "g_szAddressingModes Displacement Incorrect 4"
41 %endif
42%endif
43
44g_szBusTypeValues:
45g_szBusTypeValues_8Dual: db "D8 ",NULL
46g_szBusTypeValues_8Reversed: db "X8 ",NULL
47g_szBusTypeValues_8Single: db "S8 ",NULL
48g_szBusTypeValues_16: db " 16",NULL
49g_szBusTypeValues_32: db " 32",NULL
50g_szBusTypeValues_Serial: db "SER",NULL
51g_szBusTypeValues_Displacement equ (g_szBusTypeValues_8Reversed - g_szBusTypeValues)
52;
53; Ensure that bus type strings are correctly spaced in memory
54;
55%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
56 %if g_szBusTypeValues_8Dual <> g_szBusTypeValues
57 %error "g_szBusTypeValues Displacement Incorrect 1"
58 %endif
59 %if g_szBusTypeValues_8Reversed <> g_szBusTypeValues + g_szBusTypeValues_Displacement
60 %error "g_szBusTypeValues Displacement Incorrect 2"
61 %endif
62 %if g_szBusTypeValues_8Single <> g_szBusTypeValues_8Reversed + g_szBusTypeValues_Displacement
63 %error "g_szBusTypeValues Displacement Incorrect 3"
64 %endif
65 %if g_szBusTypeValues_16 <> g_szBusTypeValues_8Single + g_szBusTypeValues_Displacement
66 %error "g_szBusTypeValues Displacement Incorrect 4"
67 %endif
68 %if g_szBusTypeValues_32 <> g_szBusTypeValues_16 + g_szBusTypeValues_Displacement
69 %error "g_szBusTypeValues Displacement Incorrect 5"
70 %endif
71 %if g_szBusTypeValues_Serial <> g_szBusTypeValues_32 + g_szBusTypeValues_Displacement
72 %error "g_szBusTypeValues Displacement Incorrect 6"
73 %endif
74%endif
75
76g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2-u s",NULL
77
78g_szDashForZero: db "- ",NULL
79
80; Boot Menu Floppy Disk strings
81;
82; The following strings are used by BootMenuPrint_RefreshInformation
83; To support optimizations in that code, these strings must start on the same 256 byte page,
84; which is checked at assembly time below.
85;
86g_szFddStart:
87g_szFddUnknown: db "Unknown",NULL
88g_szFddSizeOr: db "5",ONE_QUARTER,QUOTATION_MARK," or 3",ONE_HALF,QUOTATION_MARK," DD",NULL
89g_szFddSize: db "%s",QUOTATION_MARK,", %u kiB",NULL ; 3½", 1440 kiB
90g_szFddThreeHalf: db "3",ONE_HALF,NULL
91g_szFddEnd:
92g_szFddFiveQuarter: db "5",ONE_QUARTER,NULL
93
94%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
95 %if ((g_szFddStart-$$) & 0xff00) <> ((g_szFddEnd-$$) & 0xff00)
96 %error "g_szFdd* strings must start on the same 256 byte page, required by the BootMenuPrint_RefreshInformation routines for floppy drives. Please move this block up or down within strings.asm"
97 %endif
98%endif
99
100; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP
101; To support an optimization in that code, these strings must start on the same 256 byte page,
102; which is checked at assembly time below.
103;
104g_szDetectStart:
105g_szDetectMaster: db "Master",NULL
106g_szDetectSlave: db "Slave ",NULL
107g_szDetectOuter: db "IDE %s at %s: ",NULL
108;%%; %ifdef MODULE_SERIAL ;%%; is stripped off after string compression, %ifdef won't compress properly
109g_szDetectOuterSerial: db "Serial %s on %s: ",NULL
110g_szDetectCOM: db "COM%c%s",NULL
111g_szDetectCOMAuto: db " Detect",NULL
112g_szDetectCOMSmall: db "/%u%u00",NULL ; IDE Master at COM1/9600:
113g_szDetectCOMLarge: db "/%u.%uK",NULL ; IDE Master at COM1/19.2K:
114;%%; %endif ;%%; is stripped off after string compression, %ifdef won't compress properly
115g_szDetectEnd:
116g_szDetectPort: db "%x",NULL ; IDE Master at 1F0h:
117
118%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
119 %if ((g_szDetectEnd-$$) & 0xff00) <> ((g_szDetectStart-$$) & 0xff00)
120 %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP. Please move this block up or down within strings.asm"
121 %endif
122%endif
123
124; Boot Menu menuitem strings
125;
126; The following strings are used by BootMenuPrint_* routines.
127; To support optimizations in that code, these strings must start on the same 256 byte page,
128; which is checked at assembly time below.
129;
130g_szBootMenuPrintStart:
131g_szDriveNum: db "%x %s",NULL
132g_szDriveNumBOOTNFO: db "%x %z",NULL
133g_szFloppyDrv: db "Floppy Drive %c",NULL
134g_szBootMenuPrintEnd:
135g_szForeignHD: db "Foreign Hard Disk",NULL
136
137%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
138 %if ((g_szBootMenuPrintStart-$$) & 0xff00) <> ((g_szBootMenuPrintEnd-$$) & 0xff00)
139 %error "g_szBootMenuPrint* strings must start on the same 256 byte page, required by the BootMenuPrint_* routines. Please move this block up or down within strings.asm"
140 %endif
141%endif
142
143; Boot menu bottom of screen strings
144g_szFDD: db "FDD ",NULL
145g_szHDD: db "HDD ",NULL
146g_szRomBoot: db "ROM Boot",NULL
147g_szHotkey: db "%A%c%c%A%s%A ",NULL
148
149; Boot Menu information strings
150g_szCapacity: db "Capacity : %s",NULL
151g_szCapacityNum: db "%5-u.%u %ciB",NULL
152g_szInformation: db "%s",LF,CR
153 db "Addr.",SINGLE_VERTICAL,"Block",SINGLE_VERTICAL,"Bus",SINGLE_VERTICAL, "IRQ",SINGLE_VERTICAL,"Reset",LF,CR
154 db "%s",SINGLE_VERTICAL, "%5-u",SINGLE_VERTICAL, "%s",SINGLE_VERTICAL," %2-I",SINGLE_VERTICAL,"%5-x" ,NULL
155
156;------------------------------------------------------------------------------------------
157;
158; Tables for StringsCompress.pl
159;
160;$translate{ord(' ')} = 0;
161;$translate{172} = 1; # ONE_QUARTER
162;$translate{171} = 2; # ONE_HALF
163;$translate{179} = 3; # SINGLE_VERTICAL
164;$translate{175} = 4; # ANGLE_QUOTE_RIGHT
165;$translate{ord('!')} = 5;
166;$translate{ord('"')} = 6;
167;$translate{ord(',')} = 7;
168;$translate{ord('-')} = 8;
169;$translate{ord('.')} = 9;
170;$translate{ord('/')} = 10;
171;$translate{ord('1')} = 11;
172;$translate{ord('2')} = 12;
173;$translate{ord('3')} = 13;
174;$translate{ord('4')} = 14;
175;$translate{ord('5')} = 15;
176;$translate{ord('6')} = 16;
177;$translate{ord('8')} = 17;
178;$translate{200} = 18; # DOUBLE_BOTTOM_LEFT_CORNER
179;$translate{181} = 19; # DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL
180;$translate{ord('0')} = 20;
181;
182; Formats begin immediately after the last Translated character (they are in the same table)
183;
184;$format_begin = 21;
185;
186;$format{"c"} = 21; # n/a
187;$format{"2-I"} = 22; # must be even
188;$format{"u"} = 23; # must be odd
189;$format{"5-u"} = 24; # must be even
190;$format{"x"} = 25; # must be odd
191;$format{"5-x"} = 26; # must be even
192;$format{"nl"} = 27; # n/a
193;$format{"2-u"} = 28; # must be even
194;$format{"A"} = 29; # n/a
195;$format{"s"} = 30; # n/a, normal string from DS
196;$format{"z"} = 31; # n/a, boot string from BDA
197;
198; NOTE: The last $format cannot exceed 31 (stored in a 5-bit quantity).
199;
200; Starting point for the "normal" range, typically around 0x40 to cover upper and lower case
201; letters. If lower case 'z' is not used, 0x3a can be a good choice as it adds ':' to the
202; front end.
203;
204;$normal_base = 0x3a;
205;
206; End of StringsCompress.pl information
207;
208;------------------------------------------------------------------------------------------
209
210
Note: See TracBrowser for help on using the repository browser.