source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectDrives.asm @ 594

Last change on this file since 594 was 594, checked in by aitotat, 6 years ago

Previosly committed flash fix for configurator was incomplete. Now fixed properly.
Added MODULE_MFM_COMPATIBILITY.

File size: 10.0 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for detecting drive for the BIOS.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Detects all IDE hard disks to be controlled by this BIOS.
25;
26; DetectDrives_FromAllIDEControllers
27;   Parameters:
28;       DS:     RAMVARS segment
29;       ES:     BDA segment (zero)
30;   Returns:
31;       Nothing
32;   Corrupts registers:
33;       All (not segments)
34;--------------------------------------------------------------------
35DetectDrives_FromAllIDEControllers:
36    call    RamVars_GetIdeControllerCountToCX
37    mov     bp, ROMVARS.ideVars0            ; CS:BP now points to first IDEVARS
38
39.DriveDetectLoop:                           ; Loop through IDEVARS
40    push    cx
41
42    mov     cx, g_szDetectMaster
43    mov     bh, MASK_DRVNHEAD_SET                               ; Select Master drive
44    call    StartDetectionWithDriveSelectByteInBHandStringInCX  ; Detect and create DPT + BOOTNFO
45
46    mov     cx, g_szDetectSlave
47    mov     bh, MASK_DRVNHEAD_SET | FLG_DRVNHEAD_DRV
48    call    StartDetectionWithDriveSelectByteInBHandStringInCX
49
50%ifdef MODULE_HOTKEYS
51%ifdef MODULE_SERIAL
52    ; This is only needed for hotkey F6 (ComDtct) to work
53    call    ScanHotkeysFromKeyBufferAndStoreToBootvars          ; Done here while CX is still protected
54%endif
55%endif
56
57    pop     cx
58
59    add     bp, BYTE IDEVARS_size           ; Point to next IDEVARS
60
61%ifdef MODULE_SERIAL
62    jcxz    .AddHardDisks                   ; Set to zero on .ideVarsSerialAuto iteration (if any)
63%endif
64    loop    .DriveDetectLoop
65
66%ifdef MODULE_SERIAL
67;----------------------------------------------------------------------
68;
69; if serial drive detected, do not scan (avoids duplicate drives and isn't needed - we already have a connection)
70;
71    call    FindDPT_ToDSDIforSerialDevice   ; Does not modify AX
72    jnc     .AddHardDisks
73
74    mov     bp, ROMVARS.ideVarsSerialAuto   ; Point to our special IDEVARS structure, just for serial scans
75
76%ifdef MODULE_HOTKEYS
77    cmp     al, COM_DETECT_HOTKEY_SCANCODE  ; Set by last call to ScanHotkeysFromKeyBufferAndStoreToBootvars above
78    je      .DriveDetectLoop
79%endif
80
81    mov     al, [cs:ROMVARS.wFlags]         ; Configurator set to always scan?
82    or      al, [es:BDA.bKBFlgs1]           ; Or, did the user hold down the ALT key?
83    and     al, 8                           ; 8 = alt key depressed, same as FLG_ROMVARS_SERIAL_SCANDETECT
84    jnz     .DriveDetectLoop
85%endif ; MODULE_SERIAL
86
87.AddHardDisks:
88;----------------------------------------------------------------------
89;
90; Add in hard disks to BDA, finalize our Count and First variables
91;
92; Note that we perform the add to bHDCount and store bFirstDrv even if the count is zero.
93; This is done because we use the value of .bFirstDrv to know how many drives were in the system
94; at the time of boot, and to return that number on int13h/8h calls.  Because the count is zero,
95; FindDPT_ForDriveNumber will not find any drives that are ours.
96;
97
98; Here we might want to replace BIOS configured drives with the ones we detected.
99; Primary reason is to support dynamic overlay feature in the future. Second reason
100; is a hack to get Windows 95 load proper IDE drivers.
101; 
102; The Windows hack has two parts. First part is to try to alter CMOS address 12h as that
103; is what Windows 95 driver reads to detect IDE drives. Altering is not possible on all
104; systems since CMOS has a checksum but it's location is not standardized. We will first
105; try to detect valid checksum. If it succeeds, then it is safe to assume this system
106; has compatible CMOS and we can alter it.
107; If verify fails, we do the more dirty hack to zero BDA drive count. Then Windows 95 works
108; as long as user has configured at least one drive in the BIOS setup.
109
110%ifdef USE_AT   ; FLG_ROMVARS_IGNORE_MOTHERBOARD_DRIVES is for AT builds only
111
112    %ifdef MODULE_WIN95_CMOS_HACK
113        mov     dl, HARD_DISK_TYPES
114        call    CMOS_ReadFromIndexInDLtoAL
115        test    al, al
116        jnz     SHORT .ContinueInitialization   ; CMOS byte 12h is ready for Windows 95
117        call    CMOS_Verify10hTo2Dh             ; Can we modify CMOS?
118        jnz     SHORT .ClearBdaDriveCount       ; Unsupported BIOS, use plan B
119   
120        ; Now we can alter CMOS location 12h
121        mov     dl, HARD_DISK_TYPES
122        mov     al, 0F0h    ; Drive 0 type 16...47 but Windows doesn't care as long as this is not zero
123        call    CMOS_WriteALtoIndexInDL
124        call    CMOS_StoreNewChecksumFor10hto2Dh
125.ClearBdaDriveCount:
126    %endif  ; MODULE_WIN95_CMOS_HACK
127
128    test    BYTE [cs:ROMVARS.wFlags], FLG_ROMVARS_IGNORE_MOTHERBOARD_DRIVES
129    jz      SHORT .ContinueInitialization
130    mov     BYTE [es:BDA.bHDCount], 0   ; Set hard disk count to zero
131.ContinueInitialization:
132%endif
133
134    mov     cx, [RAMVARS.wDrvCntAndFlopCnt]     ; Our count of hard disks
135    mov     al, [es:BDA.bHDCount]
136    add     [es:BDA.bHDCount], cl       ; Add our drives to the system count
137    or      al, 80h                     ; Or in hard disk flag
138    mov     [RAMVARS.bFirstDrv], al     ; Store first drive number
139
140.AddFloppies:
141%ifdef MODULE_SERIAL_FLOPPY
142;----------------------------------------------------------------------
143;
144; Add in any emulated serial floppy drives, finalize our packed Count and First variables
145;
146    dec     ch
147    mov     al, ch
148    js      .NoFloppies                     ; if no drives are present, we store 0ffh
149
150    call    FloppyDrive_GetCountFromBIOS_or_BDA
151
152    push    ax
153
154    add     al, ch                          ; Add our drives to existing drive count
155    cmp     al, 3                           ; For BDA, max out at 4 drives (ours is zero based)
156    jb      .MaxBDAFloppiesExceeded
157    mov     al, 3
158.MaxBDAFloppiesExceeded:
159    eROR_IM al, 2                           ; move to bits 6-7
160    inc     ax                              ; low order bit, indicating floppy drive exists
161
162    mov     ah, 3Eh                         ; AND mask to AH (all bits set except floppy drive count/present)
163    and     ah, [es:BDA.wEquipment]         ; Load Equipment WORD low byte and mask off drive number and drives present bit
164    or      al, ah                          ; Or in new values
165    mov     [es:BDA.wEquipment], al         ; and store
166
167    mov     al, 1Eh                         ; BDA pointer to Floppy DPT
168    mov     si, AH8h_FloppyDPT
169    call    Interrupts_InstallHandlerToVectorInALFromCSSI
170
171    pop     ax
172
173    shr     ch, 1                           ; number of drives, 1 or 2 only, to CF flag (clear=1, set=2)
174    eRCL_IM al, 1                           ; starting drive number in upper 7 bits, number of drives in low bit
175.NoFloppies:
176    mov     [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst], al
177%endif
178    ret
179
180%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
181    %if FLG_ROMVARS_SERIAL_SCANDETECT != 8
182        %error "DetectDrives is currently coded to assume that FLG_ROMVARS_SERIAL_SCANDETECT is the same bit as the ALT key code in the BDA.  Changes in the code will be needed if these values are no longer the same."
183    %endif
184%endif
185
186
187;--------------------------------------------------------------------
188; StartDetectionWithDriveSelectByteInBHandStringInCX
189;   Parameters:
190;       BH:     Drive Select byte for Drive and Head Register
191;       CX:     Offset to "Master" or "Slave" string
192;       CS:BP:  Ptr to IDEVARS for the drive
193;       DS:     RAMVARS segment
194;       ES:     Zero (BDA segment)
195;   Returns:
196;       Nothing
197;   Corrupts registers:
198;       AX, BL, CX, DX, SI, DI
199;--------------------------------------------------------------------
200StartDetectionWithDriveSelectByteInBHandStringInCX:
201    call    DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
202
203%ifdef MODULE_HOTKEYS
204    call    HotkeyBar_UpdateDuringDriveDetection
205%endif
206    ; Fall to .ReadAtaInfoFromHardDisk
207
208
209;--------------------------------------------------------------------
210; .ReadAtaInfoFromHardDisk
211;   Parameters:
212;       BH:     Drive Select byte for Drive and Head Register
213;       DX:     Autodetected port (for devices that support autodetection)
214;       CS:BP:  Ptr to IDEVARS for the drive
215;       DS:     RAMVARS segment
216;       ES:     Zero (BDA segment)
217;   Returns:
218;       CF:     Cleared if ATA-information read successfully
219;               Set if any error
220;   Corrupts registers:
221;       AX, BL, CX, DX, SI, DI
222;--------------------------------------------------------------------
223.ReadAtaInfoFromHardDisk:
224    mov     si, BOOTVARS.rgbAtaInfo     ; ES:SI now points to ATA info location
225    push    es
226    push    si
227    push    dx
228    push    bx
229    call    Device_IdentifyToBufferInESSIwithDriveSelectByteInBH
230    pop     bx
231    pop     dx
232    pop     si
233    pop     es
234    jnc     SHORT CreateBiosTablesForHardDisk
235    ; Fall to .ReadAtapiInfoFromDrive
236
237.ReadAtapiInfoFromDrive:                ; Not yet implemented
238    ;call   ReadAtapiInfoFromDrive      ; Assume CD-ROM
239    ;jnc    SHORT _CreateBiosTablesForCDROM
240
241    ;jmp    short DetectDrives_DriveNotFound
242;;; fall-through instead of previous jmp instruction
243;--------------------------------------------------------------------
244; DetectDrives_DriveNotFound
245;   Parameters:
246;       Nothing
247;   Returns:
248;       CF:     Set (from DetectPrint_NullTerminatedStringFromCSSIandSetCF)
249;   Corrupts registers:
250;       AX, SI
251;--------------------------------------------------------------------
252DetectDrives_DriveNotFound:
253    mov     si, g_szNotFound
254    jmp     DetectPrint_NullTerminatedStringFromCSSIandSetCF
255
256
257;--------------------------------------------------------------------
258; CreateBiosTablesForHardDisk
259;   Parameters:
260;       BH:     Drive Select byte for Drive and Head Register
261;       DX:     Autodetected port (for devices that support autodetection)
262;       CS:BP:  Ptr to IDEVARS for the drive
263;       ES:SI   Ptr to ATA information for the drive
264;       DS:     RAMVARS segment
265;       ES:     BDA segment
266;   Returns:
267;       Nothing
268;   Corrupts registers:
269;       AX, BX, CX, DX, SI, DI
270;--------------------------------------------------------------------
271CreateBiosTablesForHardDisk:
272%ifndef NO_ATAID_VALIDATION
273    push    bx
274    call    AtaID_VerifyFromESSI
275    pop     bx
276    jnz     SHORT DetectDrives_DriveNotFound
277%endif
278    call    CreateDPT_FromAtaInformation
279    jc      SHORT DetectDrives_DriveNotFound
280    call    DriveDetectInfo_CreateForHardDisk
281    jmp     SHORT DetectPrint_DriveNameFromDrvDetectInfoInESBX
Note: See TracBrowser for help on using the repository browser.