source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectDrives.asm @ 474

Last change on this file since 474 was 474, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Drive detection now displays autodetected XT-CF port and skips slave drives for XT-CF.
  • AH=1Eh no longer tries to disable 8-bit mode for memory mapped and DMA transfer modes.
  • Preparations to implement DMA.
File size: 9.6 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for detecting drive for the BIOS.
3
4;
5; XTIDE Universal BIOS and Associated Tools 
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12; 
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.     
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;       
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Detects all IDE hard disks to be controlled by this BIOS.
25;
26; DetectDrives_FromAllIDEControllers
27;   Parameters:
28;       DS:     RAMVARS segment
29;       ES:     BDA segment (zero)
30;   Returns:
31;       Nothing
32;   Corrupts registers:
33;       All (not segments)
34;--------------------------------------------------------------------
35DetectDrives_FromAllIDEControllers:
36    call    RamVars_GetIdeControllerCountToCX
37    mov     bp, ROMVARS.ideVars0            ; CS:BP now points to first IDEVARS
38
39.DriveDetectLoop:                           ; Loop through IDEVARS
40    push    cx
41
42    mov     cx, g_szDetectMaster
43    mov     bh, MASK_DRVNHEAD_SET                               ; Select Master drive
44    call    StartDetectionWithDriveSelectByteInBHandStringInCX  ; Detect and create DPT + BOOTNFO
45
46    mov     cx, g_szDetectSlave
47    mov     bh, MASK_DRVNHEAD_SET | FLG_DRVNHEAD_DRV
48    call    StartDetectionWithDriveSelectByteInBHandStringInCX
49
50    pop     cx
51
52    add     bp, BYTE IDEVARS_size           ; Point to next IDEVARS
53
54%ifdef MODULE_SERIAL
55    jcxz    .AddHardDisks                   ; Set to zero on .ideVarsSerialAuto iteration (if any)
56%endif
57    loop    .DriveDetectLoop
58
59%ifdef MODULE_SERIAL
60;----------------------------------------------------------------------
61;
62; if serial drive detected, do not scan (avoids duplicate drives and isn't needed - we already have a connection)
63;
64    call    FindDPT_ToDSDIforSerialDevice
65    jnc     .AddHardDisks
66
67    mov     bp, ROMVARS.ideVarsSerialAuto   ; Point to our special IDEVARS structure, just for serial scans
68
69    mov     al,[cs:ROMVARS.wFlags]          ; Configurator set to always scan?
70    or      al,[es:BDA.bKBFlgs1]            ; Or, did the user hold down the ALT key?
71    and     al,8                            ; 8 = alt key depressed, same as FLG_ROMVARS_SERIAL_ALWAYSDETECT
72    jnz     .DriveDetectLoop
73%endif
74
75.AddHardDisks:
76;----------------------------------------------------------------------
77;
78; Add in hard disks to BDA, finalize our Count and First variables
79;
80; Note that we perform the add to bHDCount and store bFirstDrv even if the count is zero.
81; This is done because we use the value of .bFirstDrv to know how many drives were in the system
82; at the time of boot, and to return that number on int13h/8h calls.  Because the count is zero,
83; FindDPT_ForDriveNumber will not find any drives that are ours.
84;
85    mov     cx, [RAMVARS.wDrvCntAndFlopCnt]     ; Our count of hard disks
86
87    mov     al, [es:BDA.bHDCount]
88    add     cl, al                      ; Add our drives to the system count
89    mov     [es:BDA.bHDCount], cl
90    or      al, 80h                     ; Or in hard disk flag
91    mov     [RAMVARS.bFirstDrv], al     ; Store first drive number
92
93.AddFloppies:
94%ifdef MODULE_SERIAL_FLOPPY
95;----------------------------------------------------------------------
96;
97; Add in any emulated serial floppy drives, finalize our packed Count and First variables
98;
99    dec     ch
100    mov     al, ch
101    js      .NoFloppies                     ; if no drives are present, we store 0ffh
102
103    call    FloppyDrive_GetCountFromBIOS_or_BDA
104
105    push    ax
106
107    add     al, ch                          ; Add our drives to existing drive count
108    cmp     al, 3                           ; For BDA, max out at 4 drives (ours is zero based)
109    jb      .MaxBDAFloppiesExceeded
110    mov     al, 3
111.MaxBDAFloppiesExceeded:
112    eROR_IM al, 2                           ; move to bits 6-7
113    inc     ax                              ; low order bit, indicating floppy drive exists
114
115    mov     ah, [es:BDA.wEquipment]         ; Load Equipment WORD low byte
116    and     ah, 03eh                        ; Mask off drive number and drives present bit
117    or      al, ah                          ; Or in new values
118    mov     [es:BDA.wEquipment], al         ; and store
119
120    mov     al, 1eh                         ; BDA pointer to Floppy DPT
121    mov     si, AH8h_FloppyDPT
122    call    Interrupts_InstallHandlerToVectorInALFromCSSI
123
124    pop     ax
125
126    shr     ch, 1                           ; number of drives, 1 or 2 only, to CF flag (clear=1, set=2)
127    rcl     al, 1                           ; starting drive number in upper 7 bits, number of drives in low bit
128.NoFloppies:
129    mov     [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst], al
130%endif
131
132    ret
133
134%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
135    %if FLG_ROMVARS_SERIAL_SCANDETECT != 8
136        %error "DetectDrives is currently coded to assume that FLG_ROMVARS_SERIAL_SCANDETECT is the same bit as the ALT key code in the BDA.  Changes in the code will be needed if these values are no longer the same."
137    %endif
138%endif
139
140
141;--------------------------------------------------------------------
142; StartDetectionWithDriveSelectByteInBHandStringInCX
143;   Parameters:
144;       BH:     Drive Select byte for Drive and Head Register
145;       CX:     Offset to "Master" or "Slave" string
146;       CS:BP:  Ptr to IDEVARS for the drive
147;       DS:     RAMVARS segment
148;       ES:     Zero (BDA segment)
149;   Returns:
150;       None
151;   Corrupts registers:
152;       AX, BL, CX, DX, SI, DI
153;--------------------------------------------------------------------
154StartDetectionWithDriveSelectByteInBHandStringInCX:
155    ; Autodetect port for XT-CF
156%ifdef MODULE_8BIT_IDE
157    call    DetectDrives_DoesIdevarsInCSBPbelongToXTCF
158    jne     SHORT .SkipXTCFportDetection
159
160    ; XT-CF do not support slave drives so skip detection
161    test    bh, FLG_DRVNHEAD_DRV
162    jnz     SHORT NoSlaveDriveAvailable
163
164    ; XT-CF do not support slave drives so we can safely update port
165    ; for next drive (another XT-CF card on same system)
166.DetectNextPort:
167    call    BootVars_GetNextXTCFportToDetectToDX
168    cmp     dx, XTCF_BASE_PORT_4
169    ja      SHORT .SkipXTCFportDetection        ; XT-CF not found from any port
170
171    call    AH1Eh_DetectXTCFwithBasePortInDX
172    jc      SHORT .DetectNextPort               ; XT-CF not found from this port
173
174    ; We now have autodetected port in DX
175    push    dx
176    xchg    ax, dx                              ; Port to print in AX
177    call    DetectPrint_StartDetectWithAutodetectedBasePortInAXandIdeVarsInCSBP
178    jmp     SHORT .DriveDetectionStringPrintedOnScreen
179
180    ; Print detect string for devices that do not support autodetection     
181.SkipXTCFportDetection:
182    push    dx
183%endif ; MODULE_8BIT_IDE
184
185    call    DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
186.DriveDetectionStringPrintedOnScreen:
187%ifdef MODULE_HOTKEYS
188    call    HotkeyBar_UpdateDuringDriveDetection
189%endif
190%ifdef MODULE_8BIT_IDE
191    pop     dx
192%endif
193    ; Fall to .ReadAtaInfoFromHardDisk
194
195
196;--------------------------------------------------------------------
197; .ReadAtaInfoFromHardDisk
198;   Parameters:
199;       BH:     Drive Select byte for Drive and Head Register
200;       DX:     Autodetected port (for devices that support autodetection)
201;       CS:BP:  Ptr to IDEVARS for the drive
202;       DS:     RAMVARS segment
203;       ES:     Zero (BDA segment)
204;   Returns:
205;       CF:     Cleared if ATA-information read successfully
206;               Set if any error
207;   Corrupts registers:
208;       AX, BL, CX, DX, SI, DI
209;--------------------------------------------------------------------
210.ReadAtaInfoFromHardDisk:
211    mov     si, BOOTVARS.rgbAtaInfo     ; ES:SI now points to ATA info location
212    push    es
213    push    si
214    push    dx
215    push    bx
216    call    Device_IdentifyToBufferInESSIwithDriveSelectByteInBH
217    pop     bx
218    pop     dx
219    pop     si
220    pop     es
221    jnc     SHORT CreateBiosTablesForHardDisk
222    ; Fall to .ReadAtapiInfoFromDrive
223
224.ReadAtapiInfoFromDrive:                ; Not yet implemented
225    ;call   ReadAtapiInfoFromDrive      ; Assume CD-ROM
226    ;jnc    SHORT _CreateBiosTablesForCDROM
227
228    ;jmp    short DetectDrives_DriveNotFound
229;;; fall-through instead of previous jmp instruction
230;--------------------------------------------------------------------
231; DetectDrives_DriveNotFound
232;   Parameters:
233;       Nothing
234;   Returns:
235;       CF:     Set (from BootMenuPrint_NullTerminatedStringFromCSSIandSetCF)
236;   Corrupts registers:
237;       AX, SI
238;--------------------------------------------------------------------
239DetectDrives_DriveNotFound:
240    mov     si, g_szNotFound
241    jmp     DetectPrint_NullTerminatedStringFromCSSIandSetCF
242
243
244;--------------------------------------------------------------------
245; CreateBiosTablesForHardDisk
246;   Parameters:
247;       BH:     Drive Select byte for Drive and Head Register
248;       DX:     Autodetected port (for devices that support autodetection)
249;       CS:BP:  Ptr to IDEVARS for the drive
250;       ES:SI   Ptr to ATA information for the drive
251;       DS:     RAMVARS segment
252;       ES:     BDA segment
253;   Returns:
254;       Nothing
255;   Corrupts registers:
256;       AX, BX, CX, DX, SI, DI
257;--------------------------------------------------------------------
258CreateBiosTablesForHardDisk:
259    push    bx
260    call    AtaID_VerifyFromESSI
261    pop     bx
262    jc      SHORT DetectDrives_DriveNotFound
263    call    CreateDPT_FromAtaInformation
264    jc      SHORT DetectDrives_DriveNotFound
265    call    DriveDetectInfo_CreateForHardDisk
266    jmp     SHORT DetectPrint_DriveNameFromDrvDetectInfoInESBX
267
268
269%ifdef MODULE_8BIT_IDE
270;--------------------------------------------------------------------
271; DetectDrives_DoesIdevarsInCSBPbelongToXTCF
272;   Parameters:
273;       CS:BP:  Ptr to IDEVARS for the drive
274;   Returns:
275;       ZF:     Set if IDEVARS belongs to XT-CF device
276;               Cleared if some other device
277;   Corrupts registers:
278;       AL
279;--------------------------------------------------------------------
280DetectDrives_DoesIdevarsInCSBPbelongToXTCF:
281    mov     al, [cs:bp+IDEVARS.bDevice]
282    cmp     al, DEVICE_8BIT_XTCF_PIO8
283    je      SHORT .DeviceIsXTCF
284    cmp     al, DEVICE_8BIT_XTCF_DMA
285    je      SHORT .DeviceIsXTCF
286    cmp     al, DEVICE_8BIT_XTCF_MEMMAP
287.DeviceIsXTCF:
288NoSlaveDriveAvailable:
289    ret
290%endif ; MODULE_8BIT_IDE
Note: See TracBrowser for help on using the repository browser.