[88] | 1 | ; Project name : XTIDE Universal BIOS |
---|
[3] | 2 | ; Description : Functions for selecting Master or Slave drive. |
---|
| 3 | |
---|
| 4 | ; Section containing code |
---|
| 5 | SECTION .text |
---|
| 6 | |
---|
| 7 | ;-------------------------------------------------------------------- |
---|
[148] | 8 | ; Selects Master or Slave drive and disables interrupts. Interrupts should |
---|
| 9 | ; be disabled for commands that do not transfer data. |
---|
| 10 | ; This function returns after drive is ready to accept commands. |
---|
| 11 | ; |
---|
| 12 | ; HDrvSel_SelectDriveAndDisableIRQ |
---|
| 13 | ; Parameters: |
---|
| 14 | ; DS:DI: Ptr to DPT |
---|
| 15 | ; Returns: |
---|
| 16 | ; AH: BIOS Error code |
---|
| 17 | ; CF: 0 if drive selected successfully |
---|
| 18 | ; 1 if any error |
---|
| 19 | ; Corrupts registers: |
---|
| 20 | ; AL |
---|
| 21 | ;-------------------------------------------------------------------- |
---|
| 22 | ALIGN JUMP_ALIGN |
---|
| 23 | HDrvSel_SelectDriveAndDisableIRQ: |
---|
| 24 | push bx |
---|
| 25 | mov al, [di+DPT.bDrvCtrl] ; Load Device Control Byte |
---|
| 26 | or al, FLG_IDE_CTRL_nIEN ; Disable interrupts |
---|
| 27 | call HDrvSel_SelectDriveAndSetControlByte |
---|
| 28 | pop bx |
---|
| 29 | ret |
---|
| 30 | |
---|
| 31 | |
---|
| 32 | ;-------------------------------------------------------------------- |
---|
[3] | 33 | ; Selects Master or Slave drive for transferring data. |
---|
| 34 | ; This means that interrupts will be enabled if so configured in |
---|
| 35 | ; IDEVARS. This function returns after drive is ready to accept commands. |
---|
| 36 | ; |
---|
| 37 | ; HDrvSel_SelectDriveForDataTransfer |
---|
| 38 | ; Parameters: |
---|
| 39 | ; DS:DI: Ptr to DPT |
---|
| 40 | ; Returns: |
---|
| 41 | ; AH: BIOS Error code |
---|
| 42 | ; CF: 0 if drive selected successfully |
---|
| 43 | ; 1 if any error |
---|
| 44 | ; Corrupts registers: |
---|
| 45 | ; AL, BX |
---|
| 46 | ;-------------------------------------------------------------------- |
---|
| 47 | ALIGN JUMP_ALIGN |
---|
| 48 | HDrvSel_SelectDriveForDataTransfer: |
---|
| 49 | mov al, [di+DPT.bDrvCtrl] ; Load Device Control Byte |
---|
| 50 | ; Fall to HDrvSel_SelectDriveAndSetControlByte |
---|
| 51 | |
---|
| 52 | ;-------------------------------------------------------------------- |
---|
| 53 | ; Selects Master or Slave drive. |
---|
| 54 | ; Device Control Byte can be used to enable or disable interrupts. |
---|
| 55 | ; This function returns only after drive is ready to accept commands. |
---|
| 56 | ; |
---|
| 57 | ; HDrvSel_SelectDriveAndSetControlByte |
---|
| 58 | ; Parameters: |
---|
| 59 | ; AL: Device Control Byte (to enable/disable interrupts) |
---|
| 60 | ; DS:DI: Ptr to DPT |
---|
| 61 | ; Returns: |
---|
| 62 | ; AH: BIOS Error code |
---|
| 63 | ; CF: 0 if drive selected successfully |
---|
| 64 | ; 1 if any error |
---|
| 65 | ; Corrupts registers: |
---|
| 66 | ; AL, BX |
---|
| 67 | ;-------------------------------------------------------------------- |
---|
| 68 | ;ALIGN JUMP_ALIGN |
---|
| 69 | HDrvSel_SelectDriveAndSetControlByte: |
---|
| 70 | push dx |
---|
| 71 | push cx |
---|
| 72 | |
---|
| 73 | ; Output Device Control Register to enable/disable interrupts |
---|
| 74 | call HDrvSel_OutputDeviceControlByte |
---|
| 75 | |
---|
| 76 | ; Select Master or Slave drive |
---|
| 77 | mov dx, [RAMVARS.wIdeBase] |
---|
| 78 | add dx, BYTE REG_IDE_DRVHD |
---|
| 79 | mov al, [di+DPT.bDrvSel] ; Load Master/Slave selection byte |
---|
| 80 | out dx, al ; Select drive |
---|
| 81 | |
---|
| 82 | ; Wait until drive is ready to accept commands |
---|
| 83 | call HStatus_WaitRdyDefTime |
---|
| 84 | pop cx |
---|
| 85 | pop dx |
---|
| 86 | ret |
---|
| 87 | |
---|
| 88 | |
---|
| 89 | ;-------------------------------------------------------------------- |
---|
| 90 | ; Outputs Device Control Byte to Device Control Register. |
---|
| 91 | ; |
---|
| 92 | ; HDrvSel_OutputDeviceControlByte |
---|
| 93 | ; Parameters: |
---|
| 94 | ; AL: Device Control Byte |
---|
| 95 | ; DS:DI: Ptr to Disk Parameter Table |
---|
| 96 | ; Returns: |
---|
| 97 | ; DX: Device Control Register address |
---|
| 98 | ; Corrupts registers: |
---|
| 99 | ; BX |
---|
| 100 | ;-------------------------------------------------------------------- |
---|
| 101 | ALIGN JUMP_ALIGN |
---|
| 102 | HDrvSel_OutputDeviceControlByte: |
---|
| 103 | eMOVZX bx, BYTE [di+DPT.bIdeOff] ; CS:BX now points to IDEVARS |
---|
| 104 | mov dx, [cs:bx+IDEVARS.wPortCtrl] ; Load Control Block base address |
---|
| 105 | add dx, BYTE REGW_IDEC_CTRL ; Add offset to Device Control Register |
---|
| 106 | out dx, al ; Output Device Control byte |
---|
| 107 | ret |
---|