source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Inc/ModuleDependency.inc @ 589

Last change on this file since 589 was 589, checked in by krille_n_, 8 years ago

Changes:

  • BIOS: Fixed a purely cosmetic bug from r542 where, in builds containing MODULE_EBIOS, the boot menu would display an incorrect drive size (0.4 kB with MODULE_STRINGS_COMPRESSED or 0.5 kB without) for old drives with no support for LBA.
  • Fixed a bug from r392 where Vision_DetectAndReturnIDinAXandPortInDXifControllerPresent would return the ID in AL instead of AH (if DANGEROUS_DETECTION had been defined).
  • Fixed a bug from r587 in AdvAtaInit.asm that would prevent detection of QDI Vision controllers.
  • Also changed how the QDI Vision IDs are defined (removed the need for shifting) to avoid confusion. This fixed a potential bug from r587 in AdvAtaInit.asm where some IDs were not being shifted.
  • Fixed a bug in PDC20x30.asm from r587 where GetPdcIDtoAX would not return with the IDE base port in DX so DisablePdcProgrammingMode would fail.
  • Made some changes to ModuleDependency.inc and other files so that MODULE_ADVANCED_ATA now requires USE_386. Consequently it is no longer included in the regular AT-builds, only in the 386_8k-build.
  • Moved the UNROLL_SECTORS_IN_CX_TO_xWORDS macros from IDE_8bit.inc to IdeIO.inc which means it's now possible to build a BIOS without MODULE_8BIT_IDE.
  • XTIDECFG: Added a minimum DOS version check (since it needs DOS version 2+) to allow the program to quit gracefully in the unlikely scenario where someone tries to run it under DOS version 1.
  • Made some changes to Drive.asm to improve drive enumeration. The old method using GET_DOS_DRIVE_PARAMETER_BLOCK_FOR_SPECIFIC_DRIVE worked well in Windows XP but not in Windows 98 SE (in Windows or in DOS mode). The two problems were; 1) The function call would access the drives which on single floppy drive systems would cause Windows to swap between A: and B: (throwing a blue screen asking the user to insert a disk etc). 2) Only floppy drives and FAT16 drives would be available in the list of drives, no FAT32/optical/network drives.
  • Improved code in IdeControllerMenu.asm so that the default port addresses for all IDE interfaces are now restored when (re-)selecting the (same) type of IDE device.
  • Also made it impossible to select a device type unless the required module is included in the loaded BIOS.
  • The version check done when loading a BIOS now uses the FLASH_SIGNATURE definition from Version.inc. Any changes affecting RomVars now only requires updating that definition. This means that changes to RomVars must be implemented in both the BIOS and XTIDECFG before being committed to the repository.
  • Added a compatibility fix for 3Com 3C503 cards to the ROM checksumming code in Buffers.asm (Buffers_GenerateChecksum).
  • SerDrive: Made some minor changes to file names and paths to improve compatibility with case sensitive environments.
  • BIOSDRVS: Made a minor size optimization which as a side effect also makes it compatible with all DOS versions including DOS version 1.
  • Library: Renamed the WAIT_RETRACE_IF_NECESSARY_THEN macro to CALL_WAIT_FOR_RETRACE_IF_NECESSARY_THEN and made a tail-call-optimized version of it (JMP_WAIT_FOR_RETRACE_IF_NECESSARY_THEN).
  • A speed optimization to the eRCL_IM macro for 386 and higher. This change breaks emulation in the sense that the macro will fail when given a memory operand as the first parameter.
  • Other minor optimizations and fixes.
File size: 4.1 KB
RevLine 
[395]1; Project name  :   XTIDE Universal BIOS
2; Description   :   Dependencies for optional modules.
3
4;
[491]5; XTIDE Universal BIOS and Associated Tools
[526]6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
[395]7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
[491]12;
[395]13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
[491]16; GNU General Public License for more details.
[395]17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
[522]20; Allow RELOCATE_INT13H_STACK only for AT builds
21%ifndef USE_AT
[524]22    %ifdef RELOCATE_INT13H_STACK
23        %undef RELOCATE_INT13H_STACK
24        %warning "RELOCATE_INT13H_STACK is not supported for XT builds!"
25    %endif
[522]26%endif
27
[398]28%ifdef MODULE_SERIAL_FLOPPY
29    %ifndef MODULE_SERIAL
30        %define MODULE_SERIAL
31    %endif
32%endif
[397]33
[493]34%ifdef MODULE_8BIT_IDE_ADVANCED
35    %define MODULE_8BIT_IDE
[477]36    %include "DmaController.inc"
[471]37    %include "XTCF.inc"             ; For Lo-tech XT-CF
[473]38    %include "JRIDE_ISA.inc"        ; For JR-IDE/ISA
[536]39    %include "ADP50L.inc"           ; For SVC ADP50L
[400]40%endif
41
[493]42%ifdef MODULE_8BIT_IDE
43    %include "IDE_8bit.inc"         ; For IDE 8-bit data port macros
44%endif
45
[398]46%ifdef MODULE_ADVANCED_ATA
[589]47    %ifndef USE_386
48        %error "MODULE_ADVANCED_ATA requires USE_386!"
49    %endif
[587]50    %include "AdvancedID.inc"
51    %include "PDC20x30.inc"         ; For Promise PDC 20230-C and 20630 controllers
[398]52    %include "Vision.inc"           ; For QDI Vision QD65xx VLB IDE Controllers
53%endif
54
[550]55%ifdef MODULE_COMPATIBLE_TABLES
56    %include "CompatibleDPT.inc"
57%endif
58
[397]59%ifdef MODULE_EBIOS
60    %include "EBIOS.inc"            ; Equates for EBIOS functions
61%endif
62
63%ifdef MODULE_HOTKEYS
64    %include "HotkeyBar.inc"        ; For Hotkeys
65%endif
66
[492]67%ifdef MODULE_BOOT_MENU
68    %include "BootMenu.inc"         ; For Boot Menu
69%endif
70
71%ifdef MODULE_BOOT_MENU OR MODULE_HOTKEYS
72    %define MODULE_DRIVEXLATE
73%endif
74
[398]75%ifdef MODULE_IRQ
76    %include "IntController.inc"
[397]77%endif
78
79
80; Included modules for ROMVARS.wFlags
[400]81%ifdef MODULE_8BIT_IDE
[589]82    MAIN_FLG_MODULE_8BIT_IDE            EQU FLG_ROMVARS_MODULE_8BIT_IDE
[400]83%else
[589]84    MAIN_FLG_MODULE_8BIT_IDE            EQU 0
[400]85%endif
86
[397]87%ifdef MODULE_ADVANCED_ATA
[589]88    MAIN_FLG_MODULE_ADVANCED_ATA        EQU FLG_ROMVARS_MODULE_ADVANCED_ATA
[397]89%else
[589]90    MAIN_FLG_MODULE_ADVANCED_ATA        EQU 0
[397]91%endif
92
93%ifdef MODULE_BOOT_MENU
[589]94    MAIN_FLG_MODULE_BOOT_MENU           EQU FLG_ROMVARS_MODULE_BOOT_MENU
[397]95%else
[589]96    MAIN_FLG_MODULE_BOOT_MENU           EQU 0
[397]97%endif
98
99%ifdef MODULE_EBIOS
[589]100    MAIN_FLG_MODULE_EBIOS               EQU FLG_ROMVARS_MODULE_EBIOS
[397]101%else
[589]102    MAIN_FLG_MODULE_EBIOS               EQU 0
[397]103%endif
104
105%ifdef MODULE_HOTKEYS
[589]106    MAIN_FLG_MODULE_HOTKEYS             EQU FLG_ROMVARS_MODULE_HOTKEYS
[397]107%else
[589]108    MAIN_FLG_MODULE_HOTKEYS             EQU 0
[397]109%endif
110
[398]111%ifdef MODULE_IRQ
[589]112    MAIN_FLG_MODULE_IRQ                 EQU FLG_ROMVARS_MODULE_IRQ
[398]113%else
[589]114    MAIN_FLG_MODULE_IRQ                 EQU 0
[398]115%endif
116
[397]117%ifdef MODULE_SERIAL
[589]118    MAIN_FLG_MODULE_SERIAL              EQU FLG_ROMVARS_MODULE_SERIAL
[397]119%else
[589]120    MAIN_FLG_MODULE_SERIAL              EQU 0
[397]121%endif
122
123%ifdef MODULE_SERIAL_FLOPPY
[589]124    MAIN_FLG_MODULE_SERIAL_FLOPPY       EQU FLG_ROMVARS_MODULE_SERIAL_FLOPPY
[397]125%else
[589]126    MAIN_FLG_MODULE_SERIAL_FLOPPY       EQU 0
[397]127%endif
128
129%ifdef MODULE_STRINGS_COMPRESSED
130    MAIN_FLG_MODULE_STRINGS_COMPRESSED  EQU FLG_ROMVARS_MODULE_STRINGS_COMPRESSED
131%else
132    MAIN_FLG_MODULE_STRINGS_COMPRESSED  EQU 0
133%endif
134
[567]135%ifdef MODULE_POWER_MANAGEMENT
136    MAIN_FLG_MODULE_POWER_MANAGEMENT    EQU FLG_ROMVARS_MODULE_POWER_MANAGEMENT
[400]137%else
[567]138    MAIN_FLG_MODULE_POWER_MANAGEMENT    EQU 0
[400]139%endif
140
[493]141%ifdef MODULE_8BIT_IDE_ADVANCED
142    MAIN_FLG_MODULE_8BIT_IDE_ADVANCED   EQU FLG_ROMVARS_MODULE_8BIT_IDE_ADVANCED
143%else
144    MAIN_FLG_MODULE_8BIT_IDE_ADVANCED   EQU 0
145%endif
146
[567]147MASK_ROMVARS_INCLUDED_MODULES   EQU MAIN_FLG_MODULE_8BIT_IDE | MAIN_FLG_MODULE_ADVANCED_ATA | MAIN_FLG_MODULE_BOOT_MENU | MAIN_FLG_MODULE_EBIOS | MAIN_FLG_MODULE_HOTKEYS | MAIN_FLG_MODULE_IRQ | MAIN_FLG_MODULE_SERIAL | MAIN_FLG_MODULE_SERIAL_FLOPPY | MAIN_FLG_MODULE_STRINGS_COMPRESSED | MAIN_FLG_MODULE_POWER_MANAGEMENT | MAIN_FLG_MODULE_8BIT_IDE_ADVANCED
Note: See TracBrowser for help on using the repository browser.