[470] | 1 | ; Project name : XTIDE Universal BIOS |
---|
[567] | 2 | ; Description : Lo-tech XT-CF board specifications. |
---|
[470] | 3 | ; |
---|
[545] | 4 | ; More information at http://www.lo-tech.co.uk/XT-CF |
---|
[470] | 5 | |
---|
| 6 | ; |
---|
[491] | 7 | ; XTIDE Universal BIOS and Associated Tools |
---|
[526] | 8 | ; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team. |
---|
[470] | 9 | ; |
---|
| 10 | ; This program is free software; you can redistribute it and/or modify |
---|
| 11 | ; it under the terms of the GNU General Public License as published by |
---|
| 12 | ; the Free Software Foundation; either version 2 of the License, or |
---|
| 13 | ; (at your option) any later version. |
---|
[491] | 14 | ; |
---|
[470] | 15 | ; This program is distributed in the hope that it will be useful, |
---|
| 16 | ; but WITHOUT ANY WARRANTY; without even the implied warranty of |
---|
| 17 | ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
---|
[491] | 18 | ; GNU General Public License for more details. |
---|
[470] | 19 | ; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html |
---|
| 20 | ; |
---|
| 21 | |
---|
| 22 | %ifndef XTCF_INC |
---|
| 23 | %define XTCF_INC |
---|
| 24 | |
---|
[558] | 25 | ; XT-CF requires that block must be less than 128 sectors (64 kiB) for DMA transfers. |
---|
| 26 | ; |
---|
[545] | 27 | ; Note: XT-CFv3 DMA will not interfere with PC & PC/XT memory refresh, |
---|
| 28 | ; since the XT-CFv3 detaches itself from the bus every 16 bytes transferred. |
---|
| 29 | ; |
---|
| 30 | XTCF_DMA_MODE_MAX_BLOCK_SIZE EQU 64 ; Sectors |
---|
[473] | 31 | |
---|
[470] | 32 | ; Possible base addresses. Note that all XT-CF IDE registers are SHL 1 compared |
---|
| 33 | ; to standard IDE registers. |
---|
| 34 | XTCF_BASE_PORT_1 EQU 200h |
---|
| 35 | XTCF_BASE_PORT_2 EQU 240h |
---|
| 36 | XTCF_BASE_PORT_3 EQU 300h ; Default setting |
---|
[471] | 37 | XTCF_BASE_PORT_4 EQU 340h |
---|
[470] | 38 | |
---|
| 39 | |
---|
| 40 | ; XT-CF Control Register (do not SHL 1 these!) |
---|
[545] | 41 | ; Note: XT-CFv3 control register is used *only* to raise DRQ. The register cannot be read. |
---|
| 42 | ; |
---|
| 43 | XTCF_CONTROL_REGISTER EQU 1Eh |
---|
[470] | 44 | |
---|
[545] | 45 | ; Transfer Mode Constants |
---|
[471] | 46 | ; |
---|
[545] | 47 | ; Available transfer modes depend on the controller. All XT-CF controllers |
---|
| 48 | ; support 8-bit PIO, either with 8-bit or 16-bit instructions (i.e., data |
---|
| 49 | ; can be fetched from the controller with REP INSW or REP INSB since A0 is |
---|
| 50 | ; not decoded). However, errors in the implementation of the BIU on some |
---|
| 51 | ; machines will prevent 16-bit instructions delivering data correctly. |
---|
[491] | 52 | ; |
---|
[545] | 53 | ; For XT-CFv3 adapter, DMA transfers are also supported via channel 3. |
---|
| 54 | ; |
---|
[567] | 55 | ; XT-CFv3 cannot be distinguished by software, so user must decide and set |
---|
[588] | 56 | ; the mode via a call to Int 13h function 1Eh accordingly (see AH1Eh_XTCF.asm). |
---|
[558] | 57 | ; |
---|
[589] | 58 | XTCF_8BIT_PIO_MODE EQU 0 ; XT-CF using 8-bit PIO mode |
---|
| 59 | XTCF_8BIT_PIO_MODE_WITH_BIU_OFFLOAD EQU 1 ; XT-CF using 8-bit PIO mode, but with 16-bit instructions |
---|
| 60 | XTCF_16BIT_PIO_MODE_WITH_BIU_OFFLOAD EQU 2 ; Lo-tech 8-bit IDE Adapter |
---|
| 61 | XTCF_DMA_MODE EQU 3 ; XT-CFv3 using DMA |
---|
[470] | 62 | |
---|
[584] | 63 | |
---|
[471] | 64 | ; Subcommands for AH=1Eh, Lo-tech XT-CF features. |
---|
| 65 | ; Return values common for all subcommands: |
---|
| 66 | ; AH: RET_HD_SUCCESS if drive is XT-CF |
---|
| 67 | ; RET_HD_INVALID if drive is not XT-CF |
---|
| 68 | ; CF: 0 if successful, 1 if error |
---|
[470] | 69 | |
---|
[471] | 70 | ;-------------------------------------------------------------------- |
---|
| 71 | ; IS_THIS_DRIVE_XTCF |
---|
| 72 | ; Parameters: |
---|
| 73 | ; DL: Drive Number |
---|
| 74 | ;-------------------------------------------------------------------- |
---|
| 75 | IS_THIS_DRIVE_XTCF EQU 0 |
---|
| 76 | |
---|
| 77 | ;-------------------------------------------------------------------- |
---|
[545] | 78 | ; SET_XTCF_TRANSFER_MODE |
---|
[471] | 79 | ; Parameters: |
---|
[558] | 80 | ; DH: Mode to select, i.e. XTCF_8BIT_PIO_MODE |
---|
| 81 | ; Note there's no way to know if an XT-CF adapter |
---|
| 82 | ; supports DMA, so the user should enable DMA |
---|
| 83 | ; only if a DMA-enabled XT-CFv3 is fitted. |
---|
[471] | 84 | ; DL: Drive Number |
---|
| 85 | ;-------------------------------------------------------------------- |
---|
[545] | 86 | SET_XTCF_TRANSFER_MODE EQU 1 |
---|
[471] | 87 | |
---|
| 88 | ;-------------------------------------------------------------------- |
---|
[545] | 89 | ; GET_XTCF_TRANSFER_MODE |
---|
[471] | 90 | ; Parameters: |
---|
| 91 | ; DL: Drive Number |
---|
[545] | 92 | ; Returns: |
---|
| 93 | ; DH: One of the mode values listed above, |
---|
[558] | 94 | ; i.e. XTCF_8BIT_PIO_MODE |
---|
| 95 | ; DL: Block mode sectors per block configured |
---|
[471] | 96 | ;-------------------------------------------------------------------- |
---|
[545] | 97 | GET_XTCF_TRANSFER_MODE EQU 2 |
---|
[471] | 98 | |
---|
| 99 | |
---|
[470] | 100 | %endif ; XTCF_INC |
---|